Manufacturer:
(Category: 102)
Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, ...
This TORNOS MultiSwiss 8x26 Lathe was manufactured in the year 2018. It is equipped with a Kraft & Bauer fire extinguishing system and a hinged belt conveyor. It is included all existing machining units and accessories. The machine is under power and immediately available. ... more information
This DÖRRIES SCHARMANN VC5000/450 MC Lathe was made in 2008 in Germany. It is equipped with a SIEMENS SINUMERIK control unit. ... more information
This GOODWAY GS-260MYS Lathe was manufactured in the year 2006 and has 6000 production hours. It is equipped with a Fanuc 18i-TB control unit with CU Language Customizable. This machine has 2 spindles (4000 rpm) and have simultaneous axis operation (one of these is a counter spindle). Disposes of a turret and a chip conveyor. It can be included a Kitagawa B210 Chuck, an Auto Sirona N206 Chuck and a selection of Toolholders.
This TORNOS Swiss DT 13 Swiss Type Turning was manufactured in the year 2016 and has 15476 production hours. It is equipped with a Fanuc 31i-B control unit. Disposes of a Kraeft & Bauer fire extinguishing system in all fully CNC axes. It is included with all existing machining units and accessories. The machine is under power and immediately available.
Swing diameter : 2000 mm Centre distance : 14000 mm Turning dıameter over bed : 1000 mm ... more information
Diameter max. 2500mm. Part length 9000mm., Good technical condition, 3 luneta. ... more information
Razan 1M65 Screw-cutting lathe 1M65 (RMC 2800 mm), after overhaul 1999 ... more information
Year of Manufacture/SO/GO: -/-/1981 The machine is in good technical condition. Max. circulating diameter: 630mm Distance between spikes: 3000mm Accessories: chuck and bezel By prior arrangement, the possibility of a tour in progress. ... more information
Clamping plate diameter: 3200 mm Max. workpiece diameter: 6300 mm Max. workpiece height: 2500 mm Max. workpiece weight: 5000 kg Stand movement:: 1550 mm Crossbar movement: : 1900 mm ... more information
The machine is in good technical condition. Circulating diameter above bed: 400mm Circulating diameter above support: 220mm Distance between spikes: 1500 Max. weight of the workpiece: 600 kg Weight of the machine: 1550 kg Upon prior agreement, the possibility of inspection in operation. ... more information
The machine is in good technical condition. Parameters: Turning diameter above the bed (max): 840 mm Turning diameter above the support (max): 530 mm Total power: 18.5 kW Distance between the tips: 1250 mm Weight of the lathe: 5700 kg Inspection possible by prior arrangement. ... more information
The machine is in good technical condition. Circulating diameter above the bed: 550mm Distance between points: 3000mm Accessories: chucks, lunettes Weight: 3220kg Possibility of inspection in operation by prior arrangement. Year of manufacture/SO/GO: 1979/-/1993 ... more information
The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.
The machine is in good technical condition. Circulating diameter above the bed: 630mm Distance between points: 4000mm Accessories: chucks, lunettes weight: 3,500 kg Upon prior arrangement, the possibility of inspection while in operation. Year of manufacture/SO/GO: 1979/-/1993 ... more information
An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.
OSP-P200LA-R Maximum voltage (capacity) 450 Workable diameter / standard workable diameter (capacity) 200 Maximum workable length1 (capacity) ... Bar capacitybar capacity (capacity) 51 Self-centering dimensions (main spindle) 200 Spindle speed (main spindle) 4000 Spindle nose (main spindle) ASA 6 Spindle bore (main spindle) 65 Turret type (turret) 12 UT VDI Number of tools (turret) 12 Spindle speed (driven tool spindle) 5000
screw-cutting lathe model 1M65 (RMTs 5000 mm) - Ryazan Machine-Tool Plant. Equipment after a major overhaul with modernization of the electrical and mechanical parts of the machine (a frequency converter is installed, the speed box of the machine is modernized (2-stage), the speed is controlled by a joystick) Specifications: Model 1m65 machines are designed for a variety of turning operations, including turning cones and threading: metric, inch, modular, pitch The largest diameter of the workpiece to be installed and processed, mm: over support, mm 650 over the groove in the bed, mm 1400 The biggest length of the workpiece to be processed, mm 5000, The length of the groove in the bed from the cartridge mirror, mm 390 Headstock spindle end size according to DIN 2-15M Number of spindle speed steps 24 Diameter of the cylindrical bore in the spindle, mm 128 Spindle speed limits, ...
Screw-cutting lathe 1a667, good technical condition, low wear, 100% set. ... more information