Manufacturer:
(Category: 102)
OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe ...
max. swing diameter over bed: 510 mmmax. turning diameter: 260 mmMax. Turning length: 540 mmtravel -x axis: 240 mmcenter height over bed: 260 mmcontrol: FANUC 21i-TB spindle bore: 77,5 mmno. of tools in turret: 12 xtool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8The machine is in good condition.Please refer to further technical details in the attachement of the offer.A machine video will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T 8 | T-8The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor
turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... more information
faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders
swing dia.: 606 mmmax. turning diameter: 170 mmcontrol: FANUC 31i-A travel -x1 axis: 195 - 205 mmtravel -y1 axis: 80 (+/- 40) mmtravel -z1 axis: 583 mmtravel -x2 axis: 153 - 163 mmspindle bore: 64 mmnumber of spindle speeds: 6.000 U/minAutomatic tool changer with driven tools: 12 Stk. / pcs.tool taper: 30 VDI CNC Lathe | COLCHESTER - TORNADO T8MS Twin TurretThe machine is in good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TT-6MS | TT 6MS | TT 6 MS | TT-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:80 mmtotal power requirement:1,0 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,7 x 0,6 x 1,2 mfacing lathe with manual feed, various accessories ... more information
faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor
bar capacity: 42 mmMax. Turning length: 100 mmcontrol: MITSUBUSHI M70 turning speed range - spindle: 100 - 4.000 U/minNumber of axles: 4 St.CNC lathe | müga - GTA4-42S equipped with chip conveyor.The machine is in very good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 SThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:500 mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories
:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mmswing diameter:2500|2800|3100|3500 mmturning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mmmax. torque on the faceplate:63000 Nmmax. workpiece weight:10/16 ttable speeds:0,5-80 |0,5-80 |2-63 |2-50 1/minTravel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mmTravel of ram (horiz.):1400|1600|1700|1800 mmrapid traverse X-axis:3 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55 kWWeight approx.:32/35/37|35/38/40|36/40/42|43/45 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch
:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mmswing diameter:4000|5000 mmturning height:2500/3150/4000|2500/3150/4000 mmmax. torque on the faceplate:100000 Nmmax. workpiece weight:32/50/83 ttable speeds:2 ? 40 1/minTravel of Ram (vertical):1300/1600/2000 mmTravel of ram (horiz.):2250 | 2800 mmrapid traverse X-axis:3|4 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55|75 kWWeight approx.:58/75/115 |58/75/115 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch
faceplate diameter:4700/5700 mmswing diameter:6300 mmturning height:3150/4000 mmworkpiece weight:63/100 ttable speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNmslide stroke:vertikal: 1600/2000 mmslide stroke:horizontal: 3400 mmcross section of ram:240x240/280x280 mmCross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:90/110 kWweight of the machine ca.:110/170 tMachine size (LxWxH):9000x7000x8000 mmcontrol:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side
faceplate diameter:6300 mmswing diameter:8000 mmturning height:4000 mmworkpiece weight:120 ttable speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nmslide stroke:vertikal: 2500 mmslide stroke:horizontal: 4350 mmcross section of ram:280x280 mmMax. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:110 kWweight of the machine ca.:190 tMachine size (LxWxH):11000x9000x8000 mmcontrol:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side
turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor
:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mmfaceplate diameter:1500|2000|2500|2500 mmturning length:330 mmmax. workpiece length:450 mmbed width:450 mmmax. workpiece weight -without tailstock:3000 kgwidth of cross cariage:250 mmspindle bore:155 (230 opt.) mmspindle nose:A2-11 (A2-15 opt.) spindle cone:7 MKspindle speed:4-600|4-600|4-400|4-400 1/minspindle speed steps:4 cross way of carriage:330 mmmovement longitudinal:1000|1000|1500|1500 mmspindle drive:22 (29 opt.) kWservo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mmrapid power traverse in X-and Z direction:6/8 m/minnumber of tools:4 tool post size:32x32 mmweight of the machine ca.:7000|7500|8000|10000 kgMachine size (LxWxH): ...
turning diameter:630 mmswing diameter:680 mmturning height:500 mmx-travel:1150 mmz-travel:500 mmspindle turning speed range:1 - 2000 U/minrapid traverse X-axis:30 m/minrapid traverse Z-axis:20 m/mintotal power requirement:75 kWweight of the machine ca.:22,5 tdimensions of the machine ca.:5 x 5 x 4,5 mCNC SIEMENS 840 DStar Turret Head 8-positions tool shank 60 mmC-axis driven toolingWorkpiece Handling Magazine Coolant Attachment and Chip Conveyor
Description: clamping plate diameter: 8000 mm clamping plate diameter with extensions: 12500 mm max. workpiece weight: 200 tons clamping plate speed: 0.35 - 14 rpm smallest turning diameter: 5000 mm cross member without bases: 1040 mm transom with 3 pairs of bases: 5090 mm largest ,distance between the clamping plate and blase side bracket holder: 4200 mm vertical movement of the cross support: right: 3500 mm left: 2550 mm horizontal movement side carrier: 2000 mm vertical movement side carrier: 4000 mm area required: 20000 x 20000 x 12000 mm max. workpiece weight between centers: 200,000 kg, weight approx.: 550,000 kg, Approx. Onsite Dimension. (l x w x h): 20,000 x 12,500 x 11,750 mm
turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system