- (5)
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (25)
- Carousel Turning Machines (Lathes) (62)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (35)
- CNC Cycle Turning Machines (46)
- CNC Double Spindel Turning Maschines (Lathes) (13)
- CNC Long Turning Automatics (36)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (2)
- CNC Turning Automatics (28)
- CNC Turning Centers (157)
- CNC Turning Machines (457)
- Cutting-Off Machines (8)
- Cycle Lathes (37)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (294)
- Facing Disks (2)
- Facing Lathes (15)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (27)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (10)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (20)
- Horizontal Turning Machines (Lathes) (3)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (13)
- Multi Spindle Automatics For Bars (13)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (3)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (1)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (166)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (8)
- Universal Lathes Up To 800 Mm Diameter (11)
- Universal Turning Machines (Lathes) (30)
- Vertical Turning Centres (5)
- Vertical Turning Machines (32)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (47)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (22)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (35)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMH-QUICK TECH (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- ... more
Manufacturer:
(Category: 102)
used
New in: 2006
used
CNC controller: MSX-850 (MAPPS III) Capacity Turning length mm: 1.260 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: ø825 Bar work capacity mm: 90 Upper turret X-axis travel mm: 280 (210+70) Z-axis travel mm: 1.370 Number of tool slots St .: 10 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 Indexing time s: 0,3 Main spindle Speed ​​spindle rpm: 3.000 Drive power spindle kW: 22/18,5 Spindle bore mm: 105 Chuck type: B 212 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 1.284 Holder: MK4 Coolant system High-pressure bar: 5 Equipment Chip conveyor High pressure pump Workarea light Interface for Bar feeder Working time hours Spindle 1: 4799 Rated power kVA: 38,7 Basic machine dimensions / weight Length mm: 4.600 ...
New in: 1985
used
Lathe POTISJE PA30/4000 ... more information
New in: 2002
used
Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...
New in: 2007
used
Catalog No. : 7528 Type: SL-20HE Producer: HAAS Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm Weight: 4082 t Equipment: Set of holders Chip conveyor
New in: 2001
used
3 pieces with SEICOS 21L Control -serial 486 (2001) with driven tools - no barfeed -serial 326 (1999) with driven tools - Iemca Boss 542/32 (2001) -serial 050 (1998) no driven tools - Iemca Boss 542/32 (1998) each with tail stock and chip conveyors - very well equipped ... more information
New in: 2009
used
X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.
New in: 2007
used
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... more information
New in: 2002
used
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... more information
New in: 2002
used
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... more information
New in: 1997
used
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
New in: 2005
used
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... more information
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
used
New in: 1995
used
Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling. ... more information
New in: 1996
used
Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. ... more information
New in: 1999
used
Center distance: 600mm, max. rotational speed: 2000/min. ... more information
New in: 1994
used
New in: 2012
used
X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. ... more information