- (1)
- Assembly Presses (2)
- Balling Presses (3)
- Bench Eccentric Presses (1)
- Bending And Straightening Presses (6)
- Bending Presses (146)
- Blanking Presses (2)
- Bolt Presses (1)
- CNC Bending Presses (8)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (6)
- Die Forging Hammer (4)
- Die Spotting Presses (18)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (113)
- Edge-Merging Presses (8)
- Fine Presses (14)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (6)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (17)
- Horizontal Forging Machines (4)
- Horizontal Presses (7)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (12)
- Hydraulic Fine Blanking Presses (5)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (3)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (23)
- Hydraulic Presses (88)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (9)
- Manually Operated Presses (4)
- Mechanical Presses (8)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (3)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (11)
- Straight-Bending Presses (22)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (13)
- Wire Nail Presses (1)
- Workshop Presses (61)
- more
- A+B FASTECH (3)
- A. U. SÖHNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (8)
- AIDA (2)
- AMADA (15)
- AMBOLD (12)
- AP+T Lagan (2)
- Arisa (2)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- AUTOMATOR (1)
- AYEL-TECH (15)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (2)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- BERGMANN (1)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (7)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BMW (1)
- BOLDRINI (1)
- BONFATTI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (10)
- BRUNNHUBER (1)
- BRÃœCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (4)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CLEARING (1)
- CoastOne (4)
- COLLY (6)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAEWOO (1)
- DAKO (1)
- DARLEY (5)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DEUTSCHE VEREINIGTE (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (13)
- DUNKES (20)
- DURMA (5)
- DURMAZLAR (1)
- EBU (25)
- ECAI (1)
- Eckold (21)
- EDEL (1)
- EDELHOFF (8)
- EHT (21)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (2)
- EITEL (9)
- EKALE (1)
- ELBARON (1)
- ELUMATEC (4)
- EM HART, TUCKER (1)
- EMANUEL (1)
- ... more
Manufacturer:
(Category: 106)
New in: 2016
new
pressure: 200 tstroke: 500 mmtable:: 1000 - 800 feed down: 150 -280 mm/secfeed under pressure: 10 - 26 mm/secfeed up: 180 - 300 mm/sectable height over floor: 750 mmtotal power requirement: 22 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1970
used
pressure: 100 tdimensions of the machine ca.: 2 x 1,5 x 2 mstrokes per minute: 80 total power requirement: 3 kWweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
new
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 2023
used
Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton
New in: 2023
used
Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton
New in: 2023
used
Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton
New in: 1996
used
Capacity: 63 ton Throat depth: 280 mm Ram stroke: 8 - 100 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 246 mm Distance table to ram: 346 mm Table surface area : 900 x 550 mm Slide area: 450 x 300 mm Number of strokes: 100 s.p.m. Height of the bolster plate: 80 mm Table height over floor: 800 mm Required power: 5,5 kW Dimensions L x W x H: 1380 x1258 x 2810 mm Weight of machine approx.: 4,3 ton
New in: 1987
used
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton
used
New in: 2000
used
Permanently permissible maximum force: 320 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,2 ton
New in: 2000
used
Permanently permissible maximum force: 400 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,5 ton
New in: 1972
used
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton ... more information
New in: 1986
used
Pressure total: 315 ton Stroke: 600 mm Daylight: 800 mm Table surface area : 2000 x 1200 mm Slide area: 2000 x 1200 mm Approach speed: 450 mm / sec Working speed: 14 - 40 mm / sec Return speed: 300 mm / sec Table height over floor: 900 mm Oil volume: 2000 l Required power: 75 kW Height over floor approx.: 5000 mm Dimensions L x W x H: 4900 x 3200 x 5000 mm Weight of machine approx.: 45 ton
New in: 2001
used
Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton
New in: 2006
used
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
New in: 2004
used
Capacity: 40 ton Throat depth: 225 mm Ram stroke: 4 - 100 mm Slide adjustment: 85 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 640 x 450 mm Slide area: 430 x 240 mm Number of strokes: 130 s.p.m. Required power: kW Dimensions L x W x H: 1200 x 1680 x 2160 mm Weight of machine approx.: 3,1 ton
New in: 2007
used
Press capacity: 40 ton Daylight: 550 mm Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280 mm mm Table height over floor: 900 mm Oil volume: 250 l Driving motor: 5,5 kW Dimensions L x W x H: 1.400 x 1.800 x 2.400 mm Weight of machine approx.: 2.300 kg
New in: 1979
used
Pressure total: 80 ton Stroke: 110 mm Daylight: 450 mm Table surface area : 650 x 520 mm Slide area: 560 x 480 mm Die cushion capacity in table: 20 ton Required power: 18,5 kW Dimensions L x W x H: 2000 x 1200 x 3000 mm Weight of machine approx.: 4,8 ton ... more information
New in: 1979
used
Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton
New in: 1995
used
Capacity: 100 ton Ram stroke: 6 - 82 mm Slide adjustment: 100 mm Table surface area : 1.200 x 710 mm Slide area: 900 x 500 mm Number of strokes: 50 / 200 s.p.m. Required power: 18,5 kW Dimensions L x W x H: 2700 x 2400 x 3500 mm Weight of machine approx.: 13,5 ton ... more information