- (18)
- Bed Milling Machines (39)
- Bevel Gear Hobbing Machines For Straight And Spiral Bevel Gears (2)
- CNC Bed Milling Machines (36)
- CNC Milling Centers (51)
- CNC Milling Machines (135)
- CNC Portal Milling Machines (35)
- CNC Tool-Milling Machines (34)
- CNC Universal Milling Machines (28)
- Collet Pods (1)
- Console Milling Machines (10)
- Copy Milling Machines (26)
- Cylindrical Gear Hobbing Machines, Workpiece Axis Vertical (3)
- Edge-Milling Machines (4)
- End Milling Machines (13)
- Engraving Machines (4)
- Gantry milling machines (3)
- Gear hobbing machine (7)
- Gear Tooth Chamfering Machines (1)
- Groove Milling Machines (4)
- High Speed Milling Centres (HSC) (4)
- Horizontal Console Milling Machines (20)
- Horizontal Floor Type Milling And Boring Machines (1)
- Horizontal Milling And Boring Machines (1)
- Horizontal Milling Machines (11)
- Horizontal Plano Milling Machines (1)
- Horizontal Square T-Planer Type Milling Machines (2)
- Keyway Milling Machines (2)
- Metal milling machines (4)
- Milling And Boring Centres (3)
- Milling Centers (3)
- Milling Machines (146)
- Multipurpose milling machines (5)
- Other Milling Machines (3)
- Plano-milling machines (1)
- Portal And Gantry Type Milling Machines (2)
- Portal Milling Machines (19)
- Precision milling machines (1)
- Profile cutters (2)
- Rotary Indexing Table Milling Machines (2)
- Round table milling machines (32)
- Single And Double Column Milling Machines For Long Workpieces (1)
- Single-cutter spindle moulders (1)
- Spiral Cone Wheel Cutting Machines (2)
- Thread Milling Machines (1)
- Tool Carts (3)
- Tool-Milling Machines (96)
- Tooth edge milling machines (1)
- Travelling column milling machines (25)
- Universal Knee-Type Milling Machines (107)
- Universal Milling And Boring Machines (27)
- Universal Milling Machines (105)
- Universal Plano Milling Machines (10)
- Universal Tool-Milling Machines (35)
- Vertical Console Milling Machines (8)
- Vertical Knee-Type Milling Machines (1)
- Vertical Milling And Boring Machines (1)
- Vertical Milling Machines (21)
- more
- abb (10)
- Abene (4)
- Aciera (34)
- ACME (1)
- AFM (1)
- AGIE CHARMILES MIKRON (1)
- AgieCharmilles (2)
- AGMA (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- ALZMETALL (1)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (9)
- ANAYAK (12)
- ANGER (1)
- ARBOGA (1)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (8)
- AWEA (7)
- AWEA - CNC (1)
- AXA (12)
- AXILE (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BAUER (1)
- BECKER DÃœSSELDORF (2)
- BELKI (1)
- BEMATO (2)
- BERNARDO (5)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KÖHLE (2)
- BOKÖ (2)
- BOMAC (1)
- BORNEMANN (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (4)
- Brother (6)
- BUSCH (3)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (2)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- Carver (2)
- CASTEL (1)
- CB FERRARI (1)
- CEVISA (1)
- CHARLY ROBOT (1)
- CHEVALIER (1)
- Chiron (18)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (2)
- CME (17)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COLGAR (1)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (30)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CSEPEL (2)
- CUGIR ROMANIA (1)
- Daewoo (2)
- DAH LIH (1)
- DAHLIH (1)
- DANDREA (4)
- DATRON (1)
- DATSUN (1)
- Deber (2)
- Deckel (144)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (51)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (8)
- DECKELMAHO (1)
- DEPO (1)
- DESCH (1)
- DIAG FRITZ WERNER (1)
- DIATEST (1)
- DIF (1)
- DIXI (1)
- ... more
Manufacturer:
(Category: 103)
used
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... more information
New in: 1987
used
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
New in: 1967
used
x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... more information
New in: 1983
used
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... more information
New in: 1977
used
Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... more information
New in: 1990
used
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm
used
Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible. ... more information
used
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced. ... more information
new
x-travel:1200 mmy-travel:800 mmz-travel:550 mmdistance spindle center to table:150-700 mmdistance between columns:920 mmtable-size:1320x800 mmtable load:2000 kgT-slot (width-distance-quantity):14x120x7 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:7.5/11 (opt. 30/39; 20/26 kWSpindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:30 (opt. 80) kvaWeight approx.:12 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool mea ...
New in: 2000
used
X-travel: 2000mm, y-travel: 1000mm, z-travel: 1000mm, table dimensions: 2200x1000mm, number of T-slots/ width/ distance: 7/ 22/ 140mm, max. workpiece weight: 7.2t, connected load: 40kW, weight: 17t, operational hours counter machine on: 33,852h, with documentation and accessories, without operating hours counter, has been regularly serviced, on-site inspection is possible, available from May 2024.
new
x-travel:1600 mmy-travel:1300 mmz-travel:700 mmdistance spindle center to table:200-900 (opt. 225-925/250-950) mmdistance between columns:1500 mmtable-size:1800 x 1300 mmtable load:4000 kgT-slot (width-distance-quantity):22x160x8 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:15/18,5 (opt. 25/33 od. 20/26) kWSpindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~20000 mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:60 (opt. 80) kvaWeight approx.:22 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 chip conveyor with ch ...
New in: 1987
used
Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.
New in: 2013
used
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... more information
New in: 2001
used
X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible. ... more information
used
500 €
New in: 1990
used
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible. ... more information
New in: 2012
used
X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h. ... more information
used
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
used
Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table. ... more information
New in: 1991
used
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... more information