- (26)
- Automatics (Lathes) For Bars (5)
- Bench Lathes For Precision Mechanics (26)
- Carousel Turning Machines (Lathes) (61)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (37)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (13)
- CNC Long Turning Automatics (38)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (2)
- CNC Turning Automatics (28)
- CNC Turning Centers (153)
- CNC Turning Machines (446)
- Cutting-Off Machines (9)
- Cycle Lathes (33)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (259)
- Facing Disks (2)
- Facing Lathes (14)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (25)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (10)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (18)
- Horizontal Turning Machines (Lathes) (2)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (12)
- Multi Spindle Automatics For Bars (14)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (3)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (2)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (144)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (3)
- Universal Lathes > 800 Mm Diameter (7)
- Universal Lathes Up To 800 Mm Diameter (11)
- Universal Turning Machines (Lathes) (28)
- Vertical Turning Centres (5)
- Vertical Turning Machines (32)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (40)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (2)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (4)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM / ANGELINI (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (21)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (20)
- BOEHRINGER MAZA (1)
- BOLEY (8)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUDERUS (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (36)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (2)
- CINNCINATI (1)
- Citizen (32)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMH-QUICK TECH (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (4)
- CNC-TAKANG (1)
- Colchester (47)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- ... more
Manufacturer:
(Category: 102)
used
New in: 1998
used
New in: 1991
used
Rotational speed: 22-1800/min, an inspection is possible. ... more information
New in: 2005
used
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
New in: 2021
used
Number of tool places: 12, controls: Fanuc 32iTB, operating hours: 3611h, with bar feeder IRCO Breuning MUK 7012, standard equipment for TA series: interpolating and bidirectional compensation of mechanical errors by laser measurement, main spindle: oil-cooled main spindle unit, foot pedal for opening and closing the chuck, load indicator for main spindle motor, safety device against chuck opening in case of hydraulic pressure drop.
New in: 2020
used
Controls: Fanuc 32iTB, operational hours counter: 3527h. ... more information
used
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible. ... more information
New in: 1999
used
Connected load: 44kVA, length: 3185mm, width: 1700mm, height: 1700mm, weight: 4.3t, spindle hours: 83,000h, with documentation and short bar feeder MULTIFEED, the bar feeder is not functional, the lathe has been serviced regularly. ... more information
New in: 1996
used
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... more information
New in: 2004
used
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
New in: 2005
used
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... more information
New in: 1997
used
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
New in: 2002
used
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... more information
New in: 2002
used
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... more information
New in: 1956
used
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... more information
New in: 1997
used
CONTROLS CNC Teach In Controls NUM 1062 BASIC FUNCTIONS number of x/z slides: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 570 mm turning diameter (max): 365 mm worpiece length max.: 1000 mmMAIN SPINDLE spindle revolutions (min): 3 /min spindle revolutions (max): 2500 /min number of gears: 2 spindle diameter: 62 mmX/Z SLIDE traverse velocity Z (min): 0 mm/min traverse velocity Z (max): 10000 mm/min traverse velocity X (min): 0 mm/min traverse velocity X (max): 5000 mm/min tool fixture: Steel Holder TAILSTOCK taper: MK 5 ELECTRICAL SPECIFICATIONS mains power supply: 35 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space require ...
New in: 2000
used
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.