subcategories
(3rd category level)
Manufacturer:
(Category: 104)
Universal cylindrical grinding machine Incl. internal grinding deviceTip height: 160 mm. Grinding length: approx. 500 mm. Headstock holder: MK 4 Coolant system, various grinding wheels and documentation. Unfortunately without a tailstock. Dimensions, LxDxH: approx. 1800 x 1200 x 1700 mm. Weight: approx. 2000 Kg. Neat ready for use condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.
Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.
Machine details Bearing number 1105-03191 Machine type flat grinding machine Make sit Type RP 800 Built in 1991 Control type NC Warehouse LAGER Country of origin Germany Delivery time immediately Freight base from the exhibition hall, free Technical details Grinding length 800 mm Grinding width 400 mm Workpiece height 475 mm Table length 1100 mm Table width 500 mm max. workpiece weight 700 kg Auto. Cross feed adjustable 3-50 mm/stroke Vertical delivery, 1 tick mark 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore diameter 76.2 mm Connection voltage 380 V Grinding spindle motor 3.7 / 4.5 kW Total power requirement 4.5 kW Machine weight approx. 4.5 t Room requirement approx. 3500x2000x2700 mm Information Automatic delivery, - Electro-magnetic clamping plate with straight fine pole division, dimensions 800x400mm ...
Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...
M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...
Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...
For sale: Lid Universal Tool Grinding Machine Type S12M-NC. The machine is in good condition. Still visible under power. With lots of accessories. Available at short notice ... more information
Specifications: - Sanding belt dimension approx. 2000 x 150 mm - Surface grinding opening approx. 600 x 150 mm - Sanding belt speed 14.5 / 29 m/min - Contact washer B 150 / D 200 - Drive pulley B 150 / D 200 - Engine speed 2880 rpm - Drive 400 V / 2.1 / 2.8 kW - Adjustable working height 475 - 1240 mm - Space requirement approx. W 450 x H 1000 x D 1070 mm - Weight approx. 90 kg
- CC controller Siemens 840 D - Year of construction 2002 Specification - Tip width: 600 mm - Tip height: 180 mm grinding Ø: 355 mm Z-axis speed: 15 m/min - min. Z-axis speed: 0.01 m/min - Axis resolution Z-axis: 0.5 μm X-axis speed: 10 m/min - min. X-axis speed: 0.01 m/min - Axis resolution X-axis: 0.5 μm - Grinding wheel left side (Øa x w x Øi): 500 x 80 x 203 mm - Grinding wheel circumference speed: 45 m/s - Power external grinding spindle drive: 10 kW - Speed workpiece spindle: 0 - 1000 m/min - Conical bore workpiece headstock: MK5 - Conical bore tailstock grain tip: MK4 - Cylindricity adjustment: +10° / - 4° - Total connected load: 28 kW - Operating voltage: 3x 400 V / 50 Hz - Total weight of the machine: 5800 kg - Operating sound level: 70 dB(A) according to EN 31201
CNC surface grinding machine Geibel&Hotz FS640 Z-CB Year of construction 2021 Specifications: Sanding surface (in mm): 600 x 450 Sanding area (in mm): 600 x 400 x 375 Table load max.: 600 kg Grinding spindle motor: 3.7 kW Grinding wheel, standard (in mm): 300 x 50 x 76.2 Fork funnel with 2 shaped diamonds Folding dresser Universal paper filter machine UPF 140 / 20 Cleaning pump Compact air purification device 2nd LED machine light at the top right 6 x Grinding wheel holder flat cone Pre-installation of mobile balancing device Mobile Balancer Grinding spindle motor 7 / kW Control cabinet air conditioner Oil filling The machine has a toothed belt drive in the longitudinal axis Price net free loading from location.
CNC coordinate grinding machine - HAUSER S 35 400 TECHNICAL SPECIFICATIONS: CN Type: FANUC Series O-M RS232 port: Yes X-axis stroke: 500 [mm] X-axis working speed: 0 - 1200 [mm/min] Y-axis stroke: 300 [mm] Speed working advances Y-axis: 0 - 1200 [mm/min] Z-axis stroke: 110 [mm] Z-axis working forward speed: 0.5 - 12000 [mm/min] Z-axis stroke frequency: max. 4 [Hz] W-axis stroke: 450 [mm] C-axis velocity (planetary): 5 - 250 [rpm] Table length: 600 [mm] Table width: 380 [mm] Maximum weight. Table allowable: 250 [Kg] Watering pump flow: 60 [l/min] Watering tray capacity: 125 [l] Supply voltage: 400 [V] Installed capacity: 10 [kVA] Weight: 4100 [kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: - protection of the work area - exhaust device with electrostatic air filter - fire protection device (to be submitted to the expertise of a qualified body) - ...
This machine is equipped with an automatic infeed of parts as well as an automatic removal by means of a conveyor belt. ... more information
WMW - Cylindrical grinding machine Type SA 5x630 Center height approx. 140mm Center width approx. 630mm Grinding wheel puller Measuring device Coolant device B0pegjgotf Switchboard Work lamp Dimensions LxWxH approx. 3x2x2 meters Weightapprox. 4000Kg EXTENSIVE RANGE OF GRINDING WHEELS AND MOUNTING FLANGES. COMPLETE TECHNICAL DATA CAN BE EMAILED ON REQUEST BECOME.
WMW cylindrical grinding machine B0pedtl283 Type SA(U) 200x800 Grinding diameter approx. 220mm Grinding length approx. 800mm Infinitely variable speed regulation/headstock Coolant device Grinding wheel puller Work lamp Various grinding wheels and disc flanges Dimensions approx. LxWxH 3x1.5x1.7 meters Weight approx. 3000kg
VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg
Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg
Cylinder head face milling and grinding machine in good condition. Grinding segment wheel diameter 420 mm Table clamping surface 1600x360 mm Table travel 1800 mm Distance between machine table and machine head 825 mm Extensive range of optional accessories Wet machining has never been carried out with the machine
SUNNEN sanding strip carrier used Price on request ... more information