1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg  ... más información

2 used hydr. Tilting tables = 1 tilting table: Scarf size: - Length 12 m - Width 3.56 m - Parapet height on one side: 0.13 m 2 Tilting table: Scarf size: Length 11 m Width 3.56 m - Parapet height on one side: 0.23 m both with: incl. hydraulic ram incl. vibrator Surface on both tables good condition with signs of wear. Both tables have heating coils for hot water

2 used mortar silos made by Wachter/ Maxit - Capacity approx. 20 tons - Total height approx. 6 m - Ø 2.40 m - Screw conveyor, mixing cabinet and vibrator  ... más información

Pruning shears made by Reppel type TU 20-6 = - Weight: approx. 4.0 to -Sheet width/ sheet thickness 6mm  ... más información

5 used tilting tables = Formwork width: 2.85 m Scarf length: 12 m Parapet height: 0.23 m Steel Surfaces Condition: Good The load capacity per square meter is 550 kg, walls up to a thickness of 24 cm were made. Incl. heating coils for hot water, incl. 4 hydr. Stamp  ... más información

TECHNICAL SPECIFICATIONS Manufacturer: LIEBHERR Description: Semi-Mobile Concrete Batching Plant Type: Mobilmix 2.25R DW Year of construction: 1998 Mixer Nominal Size: 2.25 cbm Throughput (at 30 s mixing time): approx. 100 cbm/h Number of cement silos: 3 pcs. Cement silo capacity: 3 x 80 t (1 double chamber) Number of cement augers: 4 pcs. Pocket row silos: 6 bags (4 x 17.5 cbm, 2 x 35 cbm), Capacity of row silo: 140 cbm Concrete discharge height: 4.0 m Weighing belt maximum load: 6,000 kg Cement scale maximum load: 1,200 kg Spirit level: 600 kg Additive dosage: 25 kg Control: LIEBHERR Litronic (in container) Heating system: Heating oil Recycling plant: FMW Operating voltage/frequency: 400 V / 50 Hz

One used automatic stirrup bender from SCHNELL, model Bar Wiser 22. Bi-directional automatic stirrup bender from bar for the production of stirrups and cut-to-size bars using wires up to Ø 22 mm (#7) . Driven by electric servomotors . Bar Wiser 22N stirrup benders are equipped with: 12.000mm bench Max. pulling speed: 120 m/min (400 ft/min)

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg  ... más información

One used METAX cutting line from Peddinhaus for bars up to 40mm  ... más información

One used good as new SCHNELL AUTOMATIC BAR SHAPING MACHINE BAR WISER 28 Bi-directional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with: - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web teleassistance

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle  ... más información

automatic lattice girders, Fabr. ECG for standard and special carriers = for the production of standard and special carriers of medium to small series. - Length of beams: min. 0.8 to max. 16.0 m - Width of beams: 70 - 116 mm - Height of the beams min. 70- max. 400 mm  ... más información

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

1 Gebr. Column formwork - Twin formwork - Length of formwork 16 m - max. chamber dimension 1.00 x 1.00 m - Steel formwork - incl. 10 vibrators - incl. converter - incl. control system Formwork is hydraulically movable  ... más información

1 Gebr. Twin, column and truss formwork Formwork length: 25,000 mm max. concrete part basic height: 1,100 mm max. extension height: 2,000 mm min. concrete part width: 200 mm max. concrete part width, one-sided: 800 mm max. concrete section width, opposite: 600 mm  ... más información

1 Gebr. hydraulic tilting table - Dimensions: 16.30 x 3.50 m - Single-sided upstand: 30 cm - height of the table. 85 cm - Steel flooring - the table needs to be reground - without vibrator, but with holding brachets with 3 hydraulic rams  ... más información

2 Gebr. Variotop stair formwork for the upside down production of straight prefabricated stairs - Stair formwork type 18/150, consisting of base grate with tilting trestles and shoring - Mechanically centrally adjustable step body with swivelling steps -Integrated hydraulic control unit for the tipping process - Height-adjustable longitudinal parking on one side - Hydraulic control unit for the tipping process - Stairs are concreted overhead - max. 18 steps - Max. nominal width of the steps is 1.50 m - Tread range 250- 310 mm

2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.  ... más información

Precast concrete plant Complete with mixer & mixer. Machines Manufacturer: FIBO With approx. 40 tables 5500 x 3200 mm 6500 x 3200 mm 7500 x 3200 mm Not yet dismantled. Location Lower Saxony Net/export price 290.000,-- Euro I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net and negotiable! Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Goldman +49 173 6242 600 (also WhatsApp)

Used Floor Paver Manufacturer: Zenith Type: 913 Year of construction: 1978 Used traveller for concrete blocks, pavers Manufacturer: Zenith Type: 913 Year: 1978  ... más información