prensas usadas para la venta

CONTROLS  PLC PNEUTRONIC PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 13 mmV-RING  nominal force: 75 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mmSTRIP-FEEDER  feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 45 kNmPRESS TABLE  table surface (left-right): 2250 mm  table surface (front-back): 1100 mm  thickness of bolster plate: 150 mm  height above floor level: 1000 mmSLIDE  slide force: 315 to  table surface (left-right): 2250 mm  table surface (front-back): 880 mm  stroke: 210 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke rate (min.): 25 /min  stroke rate (max.): 80 /min  main drive power: 60 kWSLIDE EJECTOR / CUSHION  working principle: pneumatical   nominal force: 1. ...

PRESS DESIGN  number of slide actions: 12 PRESS FORCES  total force (nominal): 36 toSLIDE  stroke: 44 mm  stroke rate (max.): 160 /minThis machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformityNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 44 mm.Standard stroke cams.Max blank diameter 47 mm.Operating speed range 40 to 160 SPM max.Machine weight approx. 3200 kg.

SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (min.): 28 /min  stroke rate (max.): 72 /minV-RING  nominal force: 25 toCOUNTER RAM  nominal force: 12 toTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 255 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thickness max.: 5 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1700 mm  space requirements -front/back-: 2420 mm  total height: 2420 mm  total weight approx.: 6000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   leveller unit: optional

CONTROLS  PLC OMRON PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 72 /minCOUNTER RAM  nominal force: 40 to  stroke: 14 mmV-RING  nominal force: 50 to  stroke: 13 mmTOOL DIMENSIONS  shut height max.: 277 mm  ram adjustment: 80 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  nominal force: 6 kN  measuring wheel: no   band lubrication system: optional   band support rolls: yes DIMENSIONS / WEIGHTS  space requirements -left/right-: 1940 mm  space requirements -front/back-: 1780 m ...

CONTROLS  PLC SIEMENS S5 SLIDE  total force (nominal): 160 to  stroke: 60 mmCOUNTER RAM  nominal force: 80 toV-RING  nominal force: 80 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 600 mm  shut height max.: 335 mm  ram adjustment: 125 mm  distance between columns (H-frame): 630 mm  passline opening (free passage in side columns): 270 mmCROP SHEAR  cutting force: 150 kNDIMENSIONS / WEIGHTS  total weight approx.: 11000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machine !2016 Overhaul by Fei ...

CONTROLS  electronic controls SLIDE  total force (nominal): 40 toTOOL DIMENSIONS  lower table (left-right): 280 mm  lower table (front-back): 280 mm  upper table (left-right): 280 mm  upper table (front-back): 280 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 100 mm  sheet thickness max.: 4 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1800 mm  space requirements -front/back-: 1840 mm  total height: 1350 mm  total weight approx.: 2500 kg

CONTROLS  PLC BECKHOFF SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (min.): 28 /min  stroke rate (max.): 70 /minV-RING  nominal force: 25 toCOUNTER RAM  nominal force: 22 toTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 200 mm  sheet thickness max.: 5 mm  feeding step min.: 0 mm  feeding step max.: 999 mm  pilot release system: yes   measuring wheel: optional ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzATTACHMENTS -FINEBLANKING PRESS-  waste cutter: yes Example of an overhaule ...

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 600 mm  thickness of bolster plate: 100 mmSLIDE  table surface (left-right): 750 mm  table surface (front-back): 450 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  return velocity max.: 250 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 800 mm  throat (C-frame): 360 mmELECTRICAL SPECIFICATIONS  total power consumption: 20.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1250 mm  space requirements -front/back-: 2150 mm&n ...

CONTROLS  PLC SIEMENS S7 SLIDE  total force (nominal): 250 toSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 10 mm/s  working velocity max.: 44 mm/s  return velocity max.: 200 mm/sCOUNTER RAM  nominal force: 63 toV-RING  nominal force: 100 toTOOL DIMENSIONS  lower table (left-right): 500 mm  lower table (front-back): 500 mm  upper table (left-right): 695 mm  upper table (front-back): 730 mm  shut height max.: 360 mmATTACHMENTS -FINEBLANKING PRESS-  light barrier: yes   closed cabin: yes   decoiler: optional   leveller unit: optional   waste cutter: yes   slug separator: yes

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 480 mm  table surface (front-back): 428 mmSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 40 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER  feeder type: roll feeder   feeding step min.: 20 mm  feeding step max.: 100 mmELECTRICAL SPECIFICATIONS  total power consumption: 4.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm &nbs ...

CONTROLS  PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN  drive system: servomechanic   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 70 mm  stroke rate (max.): 140 /minCOUNTER RAM  nominal force: 625 to  stroke: 25 mmV-RING  nominal force: 1250 to  stroke: 25 mmTOOL DIMENSIONS  lower table (left-right): 600 mm  lower table (front-back): 600 mm  upper table (left-right): 600 mm  upper table (front-back): 600 mm  shut height max.: 380 mm  ram adjustment: 125 mmSTRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step min.: 0.1 mm  feeding step max.: 300 mm  sheet length min: 2500 mmCROP SHEAR  stroke  ...

CONTROLS  PLC SIEMENS S5 PRESS DESIGN  drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 400 to  nominal work capacity: 32 kNmPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 990 mm  thickness of bolster plate: 200 mm  height above floor level: 800 mm  opening in bed (left-right): 2250 mm  opening in bed (front-back): 280 mmSLIDE  slide force: 400 to  table surface (left-right): 2600 mm  table surface (front-back): 990 mm & ...

PRESS DESIGN  drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1780 mm  table surface (front-back): 1300 mm  opening in bed (left-right): 1445 mm  opening in bed (front-back): 260 mmSLIDE  slide force: 200 to  table surface (left-right): 1500 mm  table surface (front-back): 1100 mm  stroke: 178 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 120 /minDIE CUSHION (TABLE CUSHION)  number of cushions: 11   cushion force:  ...

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kg

Capacity: 1200 ton Daylight: 2325 mm Stroke: 1300 mm Table surface area : 2250 x 3000 mm Slide area: 2250 x 3000 mm Die weight at the ram max.: 2 - 25 ton Die Weight on table max.: 2 - 20 ton Die Weight total: 40 ton Table height over floor: 750 mm Height over floor approx.: 8525 Approach speed: 450 mm / sec Working speed: 60 mm / sec Return speed: 350 mm / sec Weight of machine approx.: 200 ton No. of moving bolster: 1 pcs.

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton

Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton