Fabricante:
(Categoría: 107)
Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is alr ...
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
Description: The machine is in working condition. ,no. of cutting heads: 1, Cutting type: plasma fusion cutting, table surface area l x w : 3100 x1500 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,450 x 1,700 mm ... más información
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
plate width: 1,524 mm, plate length: 2,540 mm, plate thickness: 0,5 - 3,5 mm, max. punching diameter: 33 mm, weight approx.: 21,000 kg, Approx. Onsite Dimension. (l x w x h): 21,000 x 7,000 x 2,500 mm ... más información
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
Description: Technical data: Round steel 27 mm Square steel -- mm Angle steel 100 x 10 mm Flat steel 10 mm Punching pressure 40 tweight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,800 mm ... más información
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
Description: With various matricesweight approx.: 280 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm ... más información
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg ... más información
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. ... más información
Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg ... más información
Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mmApprox. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg
There are two identical bending machines available, working width: 2000mm. ... más información
Description: PUNCHING Punching force: 55 ton Punching capacity: Ø22 x 18 mm (diameter x thickness): Ø50 x 8 mm  , Punching channel flange (height): 180 mm Throat depth: 510 mm Maximum stroke length: 100 mm Cycles/Min. (20 mm stroke): 28 Table dimensions (W x D): 700 x 700 mm Working height up to mould: 1050 mm  , OPTIONAL TOOLS. Largest bore: Ø160 x 3 mm optional tooling Single V-bending press (W x T): 250 x 15 mm optional tooling Multiple V-bending press (W x T): 500 x 5 mm optional tooling Angle bender: 102 x 9 mm optional tool Rectangular notching machine (W x D x T): 63.5 x 90 x 8 mm optional tool V-shaped notching machine (L x W x T): 145 x 145 x 6 mm optional tool Pipe notching machine (maximum diameter): Ø 100 mm optional tool Flat bar shearing: 175 x 7 mm optional tool Corner shearing: 100 x 100 x 7 mm optional tool Blanking of round bars: Ø 32 mm optional tool Squar ...
Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler. ... más información
Description: Semi-automatic numerically controlled panel bending machine, software with cycles up to 8 sockets. Sheet metal gripping system with suction cups, equipped with rear SA blades for folding tabs.  , Main features:  , Folding dimensions Max. bendable length: 3123 mm Min. folding length: 80 mm Max. folding width: 3123 mm Min. folding width: 142 mm Max. fold size (minimum, depending on thickness): 140 mm  , Customised trolley with tool changer equipment, also supplied with spare parts and moulds for additional PSA arrangement. Further information can be found in the attached documentation, ,the measurements given are to be understood with the machine assembled. Around 26000 working hours visible on photo odometer.Approx. Onsite Dimension. (l x w x h): 6,400 x 2,700 x 2,600 mm, weight approx.: Unknown kg