Fabricante:
(Categoría: 709)
Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation. ... más información
There is a complete oil/rap mill, suitable for cleaning, conditioning and pressing available, the plant was operated until 2009 on 320 days a year, thereafter until 2016 only temporarily, includes (1) 22x elevators/TKF/KBW Ilchmann, Ergewa, CIMBRIA Hernig, type: A250-350, SU 200-400, TKF, KBW (2) 3x Discharge Screw Ergewa A350x1760 to 4880 (3) Screening Machine CIMBRIA 117, dimensions screening area: 18m² (4) Weighfeeder Herweg HDW 65/2,0-O, output: 12.5t/h (5) Drum Magnetic Separator Allgeier Ø400x800, speed: 35/min (6) Flaking Roller Mill CIMBRIA FW 812 (7) 3x Heat Pan CIMBRIA W255/7-1 (7) 3x Screw Presses CIMBRIA EP 26.1-W 255/7-1 (8) Trub separator CIMBRIA TAS 5 (9) Plate heat exchanger Thermowave TL 150 KBCL (10) 2x Plate filter Lochem Filter MVDCD 1225/1250/30/15 (10) Reed cooler Wessel GmbH GSK 250, with documentation, an on-site inspection is possible.O, output: 12.5t/h (5) Dru ...
Plant includes (1) Vapour Recompressor Kühnle, Kopp & Kausch SFOG 5,6, volume flow: 16.30m³/s, compressor/drive speed: 14,921/3598/min, pressure rise: 140mbar, temperature: 62°C, impeller material: steel, oil supply: fan cooler, control: frequency converter Loher, nominal power: 315kW, weight: 2,95t, with spare motor Loher and impeller with new shaft (2) Gearbox Kühnle, Kopp & Kausch G2a, weight: 1,1t (3) Attachments: steel lamella coupling Siemens/Flender ARP-6, base frame, electric motor and operating manual.
Max. speed: 4500/min, with control cabinet, the machine is defective and can be considered as a spare parts donor, there is corrosion on the drum base in the threaded area, the drum cover support surface for the locking ring and on individual plates. ... más información
Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. ... más información
Max. capacity: 300kg, weighing tolerance 0.1%, load cell: high-quality, legal-for-trade IP68 stainless steel strain gauge load cell 502E-3, OIML C3, oscillating and height-adjustable stainless steel feet, weighing terminal: as follows, with 5m connection cable, protected against damage on the platform side, EU calibration approval class III, CE compliant, due to increased resolution for weighing not subject to legal metrology, including display electronics and mounting, in robust stainless steel housing, IP 66, elevated, 29mm high backlit LCD display with 18mm secondary display and 8 resp. 6mm auxiliary displays, 23 silicone operating keys, including three function and ten-key keypad, on/off switch, basic functions: Zeroing, taring, gross/net changeover, Factory programming for: 100 recipes for up to 6 materials and up to 10 dosing steps, 3 filling speeds, power: 110-230VAC power cord, m ...
Feeding chute capacity: +/-40 l, with new control unit, storage container, BE 202 feeding chute, 3-fold chute system for processing difficult products, an upper loading chute with integrated pre-weigher, a coarse flow chute, a universal fine dosing chute and operating instructions in German. ... más información
Was used for the production and cooling of spreadable grease, with documentation, without accessories or spare parts, was maintained regularly, on-site inspection is possible. ... más información
Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible.
Volume: 400l, max. permissible pressure: -1.0bar, min.-max. temperature: 10°C-90°C, test pressure: 0.1bar. External dimensions X/Y/Z: approx. 1500mm/2400mm/2600mm, weight: approx. 1500kg. Completely overhauled and hardly used since. On-site inspection is possible. ... más información
There are 4 identical UNOX ovens available. Max. Temperature: 260°C, capacity: 6 trays, tray dimensions X/Y: 600mm/400mm, distance between trays: 80mm. Dimensions X/Y/Z: approx. 860mm/900mm/900mm, weight: approx. 90kg. Defects: The front glass of one oven is broken, but it works perfectly. ... más información
UHT unit for milk products: milk, cream, condensed milk, milk mix drinks, coffee cream, condensed milk, vegetable products; with tubular heat exchanger (indirect product - water), temperature cycle: 4°C (in) - ± 65°C (output to homogenizer) - ± 90°C - protein stabilizer holding 3min - 139/145°C (3 Holding tubes 2-4-6min) - output to downstream aseptic homogenizer -> off at 26°C (milk) or ± 8°C (cream); the unit is complete with balancing tank, pumps, APV Gaulin high-pressure piston pump (30 kW, 50 bar) for water, sensors, interconnected pipes, valves and control with Danfoss frequency converters. Dimensions approx. 5500x4500x2700mm; Disassembled/ready for transport