- (2)
- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (157)
- Centros de torneado horizontal (20)
- Centros de torneado verticales (5)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (176)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (13)
- Tornos cíclicos (37)
- Tornos cíclicos CNC (45)
- Tornos CNC (475)
- Tornos con husillo de cilindrar y roscar (293)
- Tornos de barras (7)
- Tornos de doble husillo CNC (13)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (61)
- Tornos de plato horizontal CNC (35)
- Tornos de precisión (5)
- Tornos de puntas (3)
- Tornos de refrentar (15)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (1)
- Tornos especiales (2)
- Tornos horizontales (4)
- Tornos para mecánicos (25)
- Tornos pesados (27)
- Tornos revólver (4)
- Tornos universales (31)
- Tornos universales de Ø más de 800 mm (8)
- Tornos universales hasta Ø 800 mm (12)
- Tornos verticales (81)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (2)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (2)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (19)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (54)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Año de construcción: 1999
usado
There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. ... más información
Año de construcción: 1991
usado
Rotational speed: 22-1800/min, an inspection is possible. ... más información
Año de construcción: 2006
usado
Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... más información
Año de construcción: 1979
usado
With multi-fix holders size C, ACU Rite position indicator, rapid traverse in X and Z axis, three-jaw lathe chuck Forkardt F315, without documentation, an on-site inspection is possible. ... más información
Año de construcción: 1996
usado
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... más información
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2002
usado
X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t. ... más información
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
Año de construcción: 2004
usado
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2005
usado
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
Año de construcción: 1997
usado
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Año de construcción: 2002
usado
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
Año de construcción: 2002
usado
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Año de construcción: 1996
usado
X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.
Año de construcción: 1956
usado
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
Año de construcción: 2017
usado
Spindle opening: 2x 65mm, turning diameter: 230mm, turning length: 673mm, turning chuck diameter: 210mm, max. rotational speed: 5000/min, spindle power: 11kW, controls: FANUC Series 31i-MODEL B, connected load: 60kVA, weight: 8.5t, operational hours counter: 9860h, with documentation, accessories, various tools, clamping devices and bar loader, without robot, was maintained regularly, an inspection is possible.
Año de construcción: 1996
usado
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Año de construcción: 1994
usado
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
Año de construcción: 2000
usado
CONTROLS CNC controls FANUC 18 T BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 700 mmMAIN SPINDLE spindle revolutions (max): 3500 /min spindle bore diameter: 91 mm c-axis: yes COUNTER SPINDLE Z-axis travel: 1105 mmX/Z SLIDE X-axis travel: 362 mm tool fixture: Turret number of tool positions (total): 12 TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4820 mm space requirements -front/back-: 3200 mm total height: 2300 mm &n ...