- (1)
- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (157)
- Centros de torneado horizontal (20)
- Centros de torneado verticales (5)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (176)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (13)
- Tornos cíclicos (37)
- Tornos cíclicos CNC (46)
- Tornos CNC (477)
- Tornos con husillo de cilindrar y roscar (293)
- Tornos de barras (7)
- Tornos de doble husillo CNC (13)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (62)
- Tornos de plato horizontal CNC (35)
- Tornos de precisión (5)
- Tornos de puntas (3)
- Tornos de refrentar (15)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (1)
- Tornos especiales (2)
- Tornos horizontales (4)
- Tornos para mecánicos (25)
- Tornos pesados (27)
- Tornos revólver (4)
- Tornos universales (31)
- Tornos universales de Ø más de 800 mm (8)
- Tornos universales hasta Ø 800 mm (12)
- Tornos verticales (81)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (2)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (2)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (19)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMH-QUICK TECH (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (54)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Año de construcción: 1997
usado
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mmMAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mmX/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATI ...
Año de construcción: 1985
usado
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... más información
Año de construcción: 2007
usado
CONTROLS CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 420 mm worpiece length max.: 1130 mmMAIN SPINDLE spindle revolutions (min): 10 /min spindle revolutions (max): 3000 /min spindle bore diameter: 51 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2600 mm space requirements -front/back-: 1250 mm total height: 1650 mm total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder
Año de construcción: 2007
usado
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... más información
Año de construcción: 1997
usado
CONTROLS CNC Teach In Controls NUM 1062 BASIC FUNCTIONS number of x/z slides: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 570 mm turning diameter (max): 365 mm worpiece length max.: 1000 mmMAIN SPINDLE spindle revolutions (min): 3 /min spindle revolutions (max): 2500 /min number of gears: 2 spindle diameter: 62 mmX/Z SLIDE traverse velocity Z (min): 0 mm/min traverse velocity Z (max): 10000 mm/min traverse velocity X (min): 0 mm/min traverse velocity X (max): 5000 mm/min tool fixture: Steel Holder TAILSTOCK taper: MK 5 ELECTRICAL SPECIFICATIONS mains power supply: 35 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space require ...
Año de construcción: 1995
usado
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... más información
usado
Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
usado
Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2006
usado
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... más información
Año de construcción: 2007
usado
X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2007
usado
A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. ... más información
Año de construcción: 2018
usado
X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible. ... más información
Año de construcción: 1988
usado
Swing ober bed/ slide: 600/ 360mm, center height: 350mm, bed width: 450mm, width: 2050mm, height: 2000mm, weight: 7,4t, including documentation, various tool holders, two stands, base jaws, counter tips and various spare parts. ... más información
Año de construcción: 1978
usado
Connected load: 2.6kW, length: 700mm, width: 1700mm, weight: 710kg, including bar feeder IEMCA MINI BOSS 325 CNC/ 32, with documentation, on-site inspection is possible. ... más información
Año de construcción: 1984
usado
Max. turret slide stroke: 100m, fast retraction stroke: 50mm, max. through-feed radius: 216mm, max. through-feed width: 110mm, connected load: 0.75kW, with bar feeder and documentation, on-site inspection is possible. ... más información
Año de construcción: 2007
usado
Control: Heidenhain DMG plus, connected load: 44kVA, length: 8000mm, width: 2500mm, height: 2000mm, weight: 6t, with accessories, on-site inspection is possible. ... más información
usado
Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.
Año de construcción: 1979
usado
It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures. ... más información
Año de construcción: 1970
usado
Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time. ... más información
Año de construcción: 1965
usado
Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.