Fabricante:
(Categoría: 205)
Working width: 630mm, max. portal passage: 690mm, clamping height: 100mm, drilling stroke: 120mm, weight: 300kg, on-site inspection is possible. ... más información
New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...
Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...
Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content ... más información
Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content ... más información
Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...
Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content ... más información
Mobile extraction Brand: Riedex Type: DM 160 New machine Technical data: - Motor power 3 kW - Nominal volume flow 1448 m³/h - Associated negative pressure 3000 Pa - Max. volume flow 2000 m³/h - 10.6 m² filter surface - motorised cleaning - Residual dust content ... más información
Mobile dust extraction Brand: Riedex Type: DM 200 New machine Technical data: - Engine power 4 kW - Nominal volume flow 2262 m³/h - max. volume flow 3200 m³/h - 14,1 m² filter surface - motor cleaning - Residual dust content ... más información
Semi-automatic boring machine Brand: VITAP Typ: ALFA 35 T New machine Technical data: - One boring head 35 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreese and any intermediate angles) - Frontal/top 51aliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator - Stroke regulation by means of 6 positions revolver (turret) (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mm) - Speed regulation of the boring group command by control board - Strengthened steel structures for tilting of the boring group - 1 motor HP. 3 (Kw 2,2) - Sta ...
autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...
bore capacity in steel (diameter): mmthroat: mmbore stroke: mmtotal power requirement: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
with 2 drilling headsused, top condition, little usedmake Hettichtype Blue Max 8 FSnumber of spindles 8 piecesnumber of spindles in row 5 piecesgrid 32 mmpress-in die 2 piecesworkpiece clamping cylinder 2 x pneumaticpneumatic drill feedhole row drilling device with pinsmobile base cabinetstop rulers 2 x 1600 mmpendulum stops 12 piecesfoot controlspace requirement approx. 1200 mm x 700 mm x 1500 mmWeight approx. 200 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspected,without guarantee and warranty
Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double row ...
Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...