subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 209)
We have a total of 5 pcs.: ABS 600-7.5 KW /R 3 pcs. /L 2 pcs. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 1.1. ... más información
Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C
Description: • Lot of electric components • 9 three-phase automatic switchesApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 350 mm, weight approx.: 45 kg ... más información
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h. ... más información
Description: • Lot of electric components • 2 three-phase circuit breakers • 4 current ransformers • A toroidal current transformerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 70 kg ... más información
Laser type: CO2, Rated power: Originally 200W, upgraded to 400W, Working range X/Y: 1300mm/1600mm. Material capacity: Plywood, MDF, cork, wood products, cardboard, paper, various plastics, textiles, acrylic glass. Dimensions X/Y: 2080mm/2300mm. Maintenance: August, 2023 - Laser power: 240W. Overhaul of beam source recommended. Including laser cooling with hoses and control cable, PC workstation with CAD program Casmate 6. Operating hours: 75783h. Documentation available.
Description: • Lot of electric components • 2 three-phase circuit breakersApprox. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 50 kg ... más información
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... más información
Approx. Onsite Dimension. (l x w x h): 800 x 600 x 600 mm, weight approx.: 100 kg ... más información
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h. ... más información
Description: • Lot of electric components • Approximately 30 piecesApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 30 kg ... más información
An inspection is possible. ... más información
Description: • Lot of electric components • 2 three-phase circuit breakersApprox. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 50 kg ... más información
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... más información
Approx. Onsite Dimension. (l x w x h): 800 x 600 x 600 mm, weight approx.: 100 kg ... más información
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. ... más información
Description: • Lot of electric components • 8 three-phase automatic switchesApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 35 kg ... más información
Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t. ... más información
Approx. Onsite Dimension. (l x w x h): 2,050 x 1,200 x 700 mm, weight approx.: 400 kg ... más información
A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.