Fabricante:
(Categoría: 106)
Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg
Bruderer BSTA 300-75 B precision high-speed punching press Feed: BBV 190 / 85 H Year of construction: 1999 Machine hours: approx. 65.000h Tool protection: PAS 6000 Nominal capacity: 30 tons Min./Max. number of strokes: 100/1800 Maximum width of the belt: 160 mm Fixed stroke: 15.9 mm Feed angle 180°. The machine is in good condition, and immediately available Further information and photos on request!
pressure:1000 tdistance between columns:3030 mmstroke:350 mmDistance table/ram, max. stroke up, adjustment up:1400 mmtable surface area:3000 x 2000 mmtable height over floor:430 mmside window:1450 x 1400 mmram surface:3000 x 2000 mmspeed down:300 mm/sspeed up:340 mm/sworking speed:18 - 44 mm/sreturn capacity:120 toil volume:4400 lwidth with platform:4950 mmpower capacity:2 x 90,0 + 10,0 kWweight:87,0 tDimensions (WxDxH):4,35 x 3,65 x 7,55 mheight over floor:6,05 mheight beneath floor:1,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:200 tdistance between columns:1650 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1600 x 1250 mmdie cushion capacity:80 tdie cushion stroke:300 mmdie cushion area:1300 x 900 mmtable height over floor:800 mmram surface:1600 x 1250 mmoil volume:ca. 2000 lpower capacity:43,0 kWweight:25,0 tDimensions (WxDxH):2,9 x 2,3 x 5,8 mheight beneath floor:0,85 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
pressure:350 tdistance between columns:1350 mmstroke:900 mmdistance table/ram, max. stroke up, adjustment up:1300 mmtable surface area:1300 x 1000 mmpressure of drawing cushion in table:100 tstroke of drawing cushion in table:380 mmdie cushion area:350 x 285 mmcapacity of ejector in ram:25 tejector stroke in ram:200 mmtable height over floor:750 mmram surface:1300 x 1000 mmspeed down:500 mm/sspeed up:160 - 470 mm/sworking speed:16 - 44 mm/sdrawing speed:57 - 160 mm/sreturn capacity:32 toil volume:1700 lpower requirement:91,0 kWDimensions (WxDxH):3,75 x 2,8 x 7,2 mheight over floor:5,28 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
pressure capacity max.:50 t ... más información
pressure at min. stroke:3 tthroat:150 mmstroke:- 39 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 380 mmpressure at min. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:790 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,2 tDimensions (WxDxH):0,5 x 0,9 x 1,4 m
pressure at min. stroke:3 tthroat:150 mmstroke:- 40 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 250 mmpressure at max. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:810 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,15 tDimensions (WxDxH):0,7 x 0,8 x 1,4 m
Pressure:063 tthroat:250 mmstroke:8 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:700 x 500 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:320 mmram surface:450 x 280 mmram adjustment:63 mmweight:4,5 tDimensions (WxDxH):1,6 x 2,0 x 2,8 moverload protection in ram:mechanical
pressure:65 tdistance between columns:930 mmstroke:1100 mmdistance table/ram, stroke up:2400 mmtable surface area:1340x700 / 930x1085 mmhole in the table:320x260 / 600x410 mmtable height over floor:850 mmside window:700 mmram surface:990 x 930 mmpower requirement:15,0 kWweight:8,0 tDimensions (WxDxH):2,8 x 2,6 x 5,2 mblank holder / ejector in ram:hydraulic side shifting device:hydraulic
Pressure:500 tdistance between columns:1550 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1200 x 1300 mmpressure of drawing cushion in table:250 tstroke of drawing cushion in table:150 mmdie cushion area:950 x 950 mmtable height over floor:1245 mmside window:1250 mmram surface:1200 x 1300 mmspeed down:750 mm/sspeed up:780 mm/sworking speed:105 mm/soil volume:4000 lpower requirement:263,0 kWweight:45,0 tDimensions (WxDxH):3,3 x 3,3 x 6,1 mheight over floor:6,1 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable
Pressure:315 tdistance between columns:1350 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1200 x 1300 mmtable height over floor:1245 mmside window:1250 mmram surface:1200 x 1300 mmspeed down:750 mm/sspeed up:680 mm/sworking speed:180 mm/soil volume:2000 lpower requirement:150,0 kWweight:35,0 tDimensions (WxDxH):3,3 x 3,3 x 5,5 mheight over floor:5,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch
pressure:200 tthroat:360 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:780 mmtable surface area:740 x 720 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:200 mmdie cushion area:530 x 530 mmtable height over floor:920 mmram surface:560 x 560 mmslide drill hole x depth:70 mmpower requirement:35,0 kWweight:10,0 tdimensions:1,3 x 2,0 x 3,4 m
pressure:160 tdistance between columns:1340 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1300 x 900 mmtable height over floor:930 mmside window:600 mmram surface:1300 x 900 mmspeed down:367 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:15,0 tDimensions (WxDxH):2,5 x 2,2 x 4,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary
Working width: 4100mm, pressing force: 1250kN, controls: DNC 80, length: 4350mm, width: 1300mm, height: 2660mm, weight: 11t, including tools. ... más información
pressure:063 tstroke:70 fix mmno. of strokes:15 - 60 /mindistance between columns:1340 mmwidth between oil collecting pans:1180 mmdistance table/ram, max. stroke up, adjustment up:328 mmtable surface area:1260 x 700 mmhole in the table:1000 x 100 mmtable height over floor:1000 mmcolumn travel -side:470 mmram surface:1300 x 650 mmram adjustment:100 mmpower requirement:27,5 kWweight:13,7 tDimensions (WxDxH):3,4 x 2,1 x 3,4 mclutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
Pressing force: 25t, stroke adjustment: 4-80mm, stroke speed: 130/min, ram adjustment: 70mm, including documentation. ... más información
turning diameter:400 mmturning length:120 mmcontrol:Sinumerik 840 D weight of the machine ca.:11 tdimensions of the machine ca.:4,1 x 2,2 x 2,5 mCNC Vertical Turning Lathe with SIEMENS SINUMERIk 840 D Control out of OEM Production in good condition.More Technical Features: x-axis 400 mmz-axis 280 mmrapid power traverse in X-and Z direction 60 / 30 m/minfeeding force 10 / 8 kNturning speeds 3000 U/minfront bearing 90 mm
Pressure:063 tthroat:250 mmstroke:10 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:700 x 500 mmhole in the table:180 x 140 mmtable height over floor:700 mmram surface:360 x 275 mmram adjustment:60 mmpower requirement:5,5 kWweight:3,8 tDimensions (WxDxH):1,9 x 1,7 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
Max. pressing force: 80kN, stroke: 180mm, power stroke: 12mm, weight: 760kg. ... más información