subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time. ... más información
Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.
Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.
Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... más información
There are 2 lathes available. Oerlikon, year of manufacture: 1980s. Heidenreich & Harbeck, year of manufacture: 1962. On-site inspection is possible. ... más información
Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... más información
turning diameter: 660 mmturning length: 1.542 mmcontrol: MSX-701 III greates pass round over bed: 730 mmspindle passage: 80 mmdist. between centers: 1.862 mmX1: 750 Z1: 1.550+100 mmX2: 195 mmZ2: 1.525 mmy-axis: +-210 mmb-axis: +- 120 mmcoolant tank: 640 l: Number of spindles: 2 St.total power requirement: 90 kVAweight of the machine ca.: 25 tdimensions of the machine ca.: 6.800 x 3.200 x 2.900 mmRapid traverse rate (X1, Z1 Axis) 50 m./min.Rapid traverse rate (X2 Z2 Axis) 30 m./min.Rapid traverse rate (Y Axis) 30 m./min.Rapid traverse rate spindle 2 ZS 30 m./mm.Rapid traverse rate B axis 40 rpmRapid traverse rate C axis 250 rpmSpindle 1:Speed 4.000 rpmNumber of speed ranges 2Nose JIS A2-8C axis in spindle 1 IMin indexing increment spindle 1 0.0001ºPower 26/22 kWMax torque 724 Nm3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm.Chuck h ...
bar material dia.: 16 mmspindle passage: 18 mmturning length: 205 mmturning speeds: 10000 U/minpositive location each: 15 Gradgripping station: 16 turning length: 80 mmturning speeds: 8000 U/minnumber of tools: 5+4+3 number of milling stations: 3 control: Fanuc 18i-TB Number of axles: 5 St.total power requirement: 3,7 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 1,9x1,1x1,75 plus FMB mbar loader: FMB Minimag 20 Bj. 2010parts conveyor: ja/yes CNC sliding headstock lathe Star SB 16 (year 2005) with FMB Minimag 20 (year 2010)good condition, available immediately.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75720 €: 1521.97 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 M: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FU ...
: neu : Bulgarien : 105460 €: 2098.65 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 M: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 92.180,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.000 mm € 138.190,-The data for this ad w ...
: neu : Bulgarien : 121780 €: 2423.42 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 108.130,- turning length4.000 mm € 129.460,- turning ...
: neu : Bulgarien : 84100 €: 1690.41 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 M: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine ...
: neu : Bulgarien : 110020 €: 2189.4 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 96.170,- turning length2.000 mm € 99.590,- turning leng ...
: neu : Bulgarien : 99560 €: 2001.16 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 M: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 86.280,- turning length2.000 mm € 89.420,- turning length4.000 mm € 106.810,- turning length5.000 mm € 116.900,- turning length6.000 mm ...
: neu : Bulgarien : 115920 €: 2306.81 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 240 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8050 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 102.070,- turning length4.000 mm € 123.600,- tu ...
: neu : Bulgarien : 111510 €: 2219.05 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 5 - 1000 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 8550 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 98.230,- turning length4.000 mm € 118.820,- turning length5.000 mm € 120.010,- turning length6.000 mm € 144.140,-The data for this ad ...
turning diameter: 500 mmcentre distance: 1000 mmcontrol: Siemens 840D swing diameter over face slide: 280 mmspindle head: Gr 8 spindle bore: 93 mmspindle diameter in front bearing: 130 mmmain drive motor: 25 kWturning speed range: 1 - 3000 U/mintailstock quill taper MT: 5 tailstock quill diameter: 90 mmtailstock travel: 180 mmtotal power requirement: 34 kVAweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,4 x 2,2 x 1,97 m- Control unit Siemens 840D- 3-jaw chuck- Support with 2 tool holders (- steady rest- Tailstock ( air pressure supported )- chip conveyor- Coolant system only 5720h operating hours very good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.