- (5)
- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (157)
- Centros de torneado horizontal (20)
- Centros de torneado verticales (5)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (182)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (13)
- Tornos cíclicos (37)
- Tornos cíclicos CNC (46)
- Tornos CNC (485)
- Tornos con husillo de cilindrar y roscar (294)
- Tornos de barras (6)
- Tornos de doble husillo CNC (13)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (62)
- Tornos de plato horizontal CNC (35)
- Tornos de precisión (5)
- Tornos de puntas (3)
- Tornos de refrentar (15)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (1)
- Tornos especiales (2)
- Tornos horizontales (3)
- Tornos para mecánicos (25)
- Tornos pesados (27)
- Tornos revólver (4)
- Tornos universales (31)
- Tornos universales de Ø más de 800 mm (8)
- Tornos universales hasta Ø 800 mm (11)
- Tornos verticales (79)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (22)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (35)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CITIZEN BOLEY (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMH-QUICK TECH (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- Danobat (2)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
usado
Año de construcción: 2006
usado
CNC controller: MSX-850 (MAPPS III) Capacity Turning length mm: 1.260 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: ø825 Bar work capacity mm: 90 Upper turret X-axis travel mm: 280 (210+70) Z-axis travel mm: 1.370 Number of tool slots St .: 10 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 Indexing time s: 0,3 Main spindle Speed spindle rpm: 3.000 Drive power spindle kW: 22/18,5 Spindle bore mm: 105 Chuck type: B 212 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 1.284 Holder: MK4 Coolant system High-pressure bar: 5 Equipment Chip conveyor High pressure pump Workarea light Interface for Bar feeder Working time hours Spindle 1: 4799 Rated power kVA: 38,7 Basic machine dimensions / weight Length mm: 4.600 ...
Año de construcción: 1985
usado
Año de construcción: 2002
usado
Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...
Año de construcción: 2007
usado
Catalog No. : 7528 Type: SL-20HE Producer: HAAS Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm Weight: 4082 t Equipment: Set of holders Chip conveyor
Año de construcción: 2001
usado
3 pieces with SEICOS 21L Control -serial 486 (2001) with driven tools - no barfeed -serial 326 (1999) with driven tools - Iemca Boss 542/32 (2001) -serial 050 (1998) no driven tools - Iemca Boss 542/32 (1998) each with tail stock and chip conveyors - very well equipped ... más información
Año de construcción: 2009
usado
X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.
Año de construcción: 2007
usado
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... más información
Año de construcción: 2002
usado
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Año de construcción: 2002
usado
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
Año de construcción: 1997
usado
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Año de construcción: 2005
usado
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
usado
Año de construcción: 1995
usado
Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling. ... más información
Año de construcción: 1996
usado
Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. ... más información
Año de construcción: 1999
usado
Center distance: 600mm, max. rotational speed: 2000/min. ... más información
Año de construcción: 1994
usado
Año de construcción: 2012
usado
X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. ... más información