Fabricante:
(Categoría: 106)
Workshop press Stenhoj 100, press force 100 tons, year of construction 2006, set-up dimensions L=1700mm, H=2300mm, W=800mm, working stroke cylinder 300mm. We sell the Stenhoj 100 because our business has evolved from industrial maintenance to plant construction and the press is no longer needed for this. The press was not used often, in the first few years for normal maintenance work such as changing bearings, etc. In recent years, only occasionally. The press has always provided reliable, trouble-free services and the necessary maintenance such as oil changes have been carried out. It shows the usual signs of wear and damage to the paintwork. The new price today is approx. 10,500.00€ in almost identical design. The machine can be viewed and tested by appointment during our working hours from 06:30-15:45.
Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manufacturer: ABB Type: IRB ...
SLIDE total force (nominal): 880 to stroke: 305 mm cutting velocity min.: 5 mm/s cutting velocity max.: 70 mm/s closing velocity: 200 mm/s returning velocity: 200 mm/sV-RING nominal force: 400 to stroke: 40 mmCOUNTER RAM nominal force: 200 to stroke: 40 mmTOOL DIMENSIONS lower table (left-right): 1010 mm lower table (front-back): 1600 mm upper table (left-right): 1000 mm upper table (front-back): 1000 mm shut height max.: 460 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 450 mm sheet thickness max.: 16 mm feeding step min.: 1 mm feeding step max.: 999.9 mm sheet length min: 3950 mm speed max.: 48 m/min Vertical adjustment: 140 ...
Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 15 mmV-RING nominal force: 75 to stroke: 13 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 999.99 mm sheet ...
Description: Serial Number: 74-20-0293 Width between uprights:  ,3700 mm , Table surface: 3350x2134 nn Punch stroke: 762 mm , Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm , Lubrication equipment: 0.75kw 1500 rpm , Pump motor power: 1.1 kw 3000rpm , Voltage: 220V, 50 hz Pneumatic installation: , Surface area: 1420x990 mm , Piston diameter: 800 mm , Stroke of plunger 305 mmm , Total power: 180Mp  ,Approx. Onsite Dimension. (l x w x h): 4,000 x 6,000 x 12,000 mm, weight approx.: 180,000 kg
PRESS DESIGN drive system: knuckle-joint feedstock transport direction: right to left SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 70 /minCOUNTER RAM nominal force: 22 toV-RING nominal force: 25 toTOOL DIMENSIONS lower table (left-right): 430 mm lower table (front-back): 490 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 230 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm sheet thicknes ...
Description: Press brake No. 4061005/S Power supply: , Voltage: 380 V Frequency: 50 Hz Absorption: 68.5 A Rated power: 37 kW - 4-pole motor. Performance: , Nominal working force: 6500 kN Useful bending length: 6100 mm Distance between posts: 8000 mm Adjustable stroke: 320 mm Adjustment stroke: 800 mm Speed range: Approach speed: 70 mm/s , Working speed: 0 - 6.5 mm/s Return speed: 65 mm/s Approximate net mass: 60000 kg Machine harmonised according to European CE regulations. Further information can be found in the enclosed documentation.weight approx.: 75,000 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,500 x 4,500 mm
PRESS DESIGN drive system: hydraulic openings in uprights: yes number of suspensions: 1 number of slide actions: 1 slide ejectors / cushion: yes opening in table: no PRESS FORCES total force (nominal): 800 toPRESS TABLE table surface (left-right): 1300 mm table surface (front-back): 1300 mmSLIDE stroke: 700 mmSLIDE EJECTOR / CUSHION nominal force: 5 to stroke: 20 mmTOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1200 mm distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS total power consumption: 400 kWDIMENSIONS / WEIGHTS total height: 6100 mm total weight approx.: 55000 kgATTACHMENTS (PRESSES) press automation: yes acc. to actual accident protection r ...
Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Gauge: Z1/Z2 Front Support Arms: 2 arm ...
pressure:250 ttable length:4000 mmtable width:3000 mmControls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 toPRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mmRAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mmRAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 toRAM EJECTORS:. - stroke:300 mm - force:14 toDIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mmTOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mmELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 ...
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE slide force: 3 to stroke: 38 mmSLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2400 mm ...
Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 toSLIDE slide force: 6 to stroke: 114 mmSLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kWSTRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kgATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes n ...
Description: Year of construction 1989 Pressure 150 t Bending length 4050 mm Stand width 3050 mm Stand projection 350 mm Installation height 430 mm Piston stroke 220 mm Table width 300 mm Oil content 390 liters Pressure output 265 bar Total power requirement 18.5 kWweight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,740 x 3,310 mm
CONTROLS PLC BECKHOFF PRESS DESIGN drive system: knuckle-joint feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 67 mm stroke rate (max.): 80 /minCOUNTER RAM nominal force: 125 toV-RING nominal force: 125 toTOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 560 mmSTRIP-FEEDER feeder type: roll feeder DIMENSIONS / WEIGHTS total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS- decoiler: optional waste cutter: yes + Control system completely renewed in 2015
Description: Technical data Locking force 120,000 kN Preforming force 2,400 kN Retraction force 2,000 kN Max. Mold weight upper part 30,000 kg Plunger stroke 1250 mm Closing speed (theoretical 450 mm/s)400 mm/s Max. Pressing speed 150 mm/s Return speed (theoretical 450 mm/s) 400 mm/s Positioning accuracy ± 0.1 mm Measuring resolution 0.01 mm Pressure regulating systems for gun pre-tensioning Number of independent systems 2 sets (1 x top, 1 x bottom) Max. Pressure 25 MPa Max. Return flow rate 2 x 900 l/min Accuracy of pressure regulation ± 0.5 MPa Pump - Motor Pump capacity 3 x 360 l/min Max. Working pressure 30 MPa Electric motors (3 x 160) 480 kW Electric motor cooling/filter circuit22 kW Speed1450 rpm (50 Hz) Pressure accumulator system Min. - Max. Working pressure 27 - 30 MPa Volume piston accumulator (6 x 50) 300 liters Oil tank volume 4000 liters Dimensionen Werkzeugeinbau ...
pressure:40 tdistance between columns:600 mmram power:40 Mpmax. ram stroke:160 mmdayligth:360 mmtable-size:560x400 mmT-slots:18 mmram hole:40 mmtable height:950 mmTotal height:2540 mmlength in width:1440 mmpower capacity:5,5 kWcentering bore - table plate:100 mmdepth:1100 mmcolumn depth:950 mmoil box capacity:250 ltotal power requirement:ant kW100 % before loadingwarranty:noneused double column drawing press, make FRITZ MUELLER, type S 40.11.1, year of production 1978
PRESS FORCES total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment
Description: Control conventional / Option: new (Siemens S7-1500F) Stroke: 650 mm Installation height (top stroke): 950 mm Table surface: 800 x 700 mm Drop-through opening in the table: 200 mm Table height above floor: 920 mm Plunger surface: 630 x 600 mm Speed down: 65 mm / s Speed up: 375 mm / s Working speed: 17 mm / s Oil volume 350 Max. pressing force: 100 to, throat: 380 mm, table surface area l x w : 800 x 700 mm, total power requirement: 18,5 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 2,500 x 4,000 mm