tornos usadas para la venta

Lathe with bezel and two heads.  ... más información

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,  ... más información

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

well-preserved, used NEF 600 Siemens Sinumerik 840 D control system Year of construction 2006 Switch-on hours 20000 h Conveyor Power chuck Schunk Spindle bore 90 mm Turret 8 positions Motor power 18 kW Machine weight 5000 kg Machine dimensions LxWxH 3600x2140x1845 mm Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

well-preserved, used NEF 400 Siemens Sinumerik 840 D control system Year of construction 2007 Switch-on hours 16000 h incl. 3-jaw wedge bar chuck Röhm Spindle bore 79 mm Turret 8 positions Rapid traverse X-axis 20 m/min Rapid traverse Z-axis 24 m/min Drive power - spindle motor 11.5 kW Tailstock displacement 550 mm Pick-up cone in the tailstock quill MK4 Quill diameter 80 mm

Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time. ... más información

Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... más información

There are 2 lathes available. Oerlikon, year of manufacture: 1980s. Heidenreich & Harbeck, year of manufacture: 1962. On-site inspection is possible. ... más información

Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... más información

turning diameter: 660 mmturning length: 1.542 mmcontrol: MSX-701 III greates pass round over bed: 730 mmspindle passage: 80 mmdist. between centers: 1.862 mmX1: 750 Z1: 1.550+100 mmX2: 195 mmZ2: 1.525 mmy-axis: +-210 mmb-axis: +- 120 mmcoolant tank: 640 l: Number of spindles: 2 St.total power requirement: 90 kVAweight of the machine ca.: 25 tdimensions of the machine ca.: 6.800 x 3.200 x 2.900 mmRapid traverse rate (X1, Z1 Axis) 50 m./min.Rapid traverse rate (X2 Z2 Axis) 30 m./min.Rapid traverse rate (Y Axis) 30 m./min.Rapid traverse rate spindle 2 ZS 30 m./mm.Rapid traverse rate B axis 40 rpmRapid traverse rate C axis 250 rpmSpindle 1:Speed 4.000 rpmNumber of speed ranges 2Nose JIS A2-8C axis in spindle 1 IMin indexing increment spindle 1 0.0001ºPower 26/22 kWMax torque 724 Nm3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm.Chuck h ...

bar material dia.: 16 mmspindle passage: 18 mmturning length: 205 mmturning speeds: 10000 U/minpositive location each: 15 Gradgripping station: 16 turning length: 80 mmturning speeds: 8000 U/minnumber of tools: 5+4+3 number of milling stations: 3 control: Fanuc 18i-TB Number of axles: 5 St.total power requirement: 3,7 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 1,9x1,1x1,75 plus FMB mbar loader: FMB Minimag 20 Bj. 2010parts conveyor: ja/yes CNC sliding headstock lathe Star SB 16 (year 2005) with FMB Minimag 20 (year 2010)good condition, available immediately.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75720 €: 1521.97 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 M: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FU ...

: neu : Bulgarien : 105460 €: 2098.65 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 M: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 92.180,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.000 mm € 138.190,-The data for this ad w ...

: neu : Bulgarien : 121780 €: 2423.42 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 108.130,- turning length4.000 mm € 129.460,- turning  ...

: neu : Bulgarien : 84100 €: 1690.41 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 M: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine ...

: neu : Bulgarien : 110020 €: 2189.4 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 96.170,- turning length2.000 mm € 99.590,- turning leng ...