prensas usadas para venda

SLIDE  total force (nominal): 880 to  stroke: 305 mm  cutting velocity min.: 5 mm/s  cutting velocity max.: 70 mm/s  closing velocity: 200 mm/s  returning velocity: 200 mm/sV-RING  nominal force: 400 to  stroke: 40 mmCOUNTER RAM  nominal force: 200 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 1010 mm  lower table (front-back): 1600 mm  upper table (left-right): 1000 mm  upper table (front-back): 1000 mm  shut height max.: 460 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 450 mm  sheet thickness max.: 16 mm  feeding step min.: 1 mm  feeding step max.: 999.9 mm  sheet length min: 3950 mm  speed max.: 48 m/min  Vertical adjustment: 140 ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet  ...

PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: right to left SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 22 toV-RING  nominal force: 25 toTOOL DIMENSIONS  lower table (left-right): 430 mm  lower table (front-back): 490 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 230 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thicknes ...

PRESS DESIGN  drive system: hydraulic   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   slide ejectors / cushion: yes   opening in table: no PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 1300 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmSLIDE EJECTOR / CUSHION  nominal force: 5 to  stroke: 20 mmTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1200 mm  distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS  total power consumption: 400 kWDIMENSIONS / WEIGHTS  total height: 6100 mm  total weight approx.: 55000 kgATTACHMENTS (PRESSES)  press automation: yes   acc. to actual accident protection r ...

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 12 PRESS FORCES  total force (nominal): 36 toSLIDE  slide force: 3 to  stroke: 38 mmSLIDE (MECHAN. PRESS)  variable speed: yes   main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 50 mm  feedstock transport direction: front-back STRIP-FEEDER  feeder type: roll feeder   sheet width max.: 50 mm  pilot release system: no   band lubrication system: optional TRANSFER SYSTEM  number of tool stations: 13   distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm   ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   n ...

CONTROLS  PLC BECKHOFF PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 67 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 125 toV-RING  nominal force: 125 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 560 mmSTRIP-FEEDER  feeder type: roll feeder DIMENSIONS / WEIGHTS  total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

PRESS FORCES  total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1 PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1400 mm  table surface (front-back): 800 mmSLIDE  table surface (left-right): 1000 mm  table surface (front-back): 600 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  autom. Slide adjustment: yes   stroke min.: 20 mm  stroke max.: 200 mm  stroke rate (max.): 45 /min  hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 510 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 VDIMENSIONS / WEIGHTS  ...

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 10 SLIDE  stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm  (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm  (1- 1-3/8")#2 to #10  25-41 mm, (1 - 1-5/8")Speed: 110 SPM

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6  ... mais informação

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   table cushion: no PRESS FORCES  total force (nominal): 125 toPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 630 mmSLIDE  table surface (left-right): 700 mm  table surface (front-back): 400 mm  stroke: 150 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 90 mm  stroke adjustment: yes   stroke min.: 15 mm  stroke max.: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 70 /min  main drive power: 15 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 400 mmELECTRICAL SPECIFICATIONS ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max. ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 350 mm  table surface (front-back): 330 mmSLIDE (MECHAN. PRESS)  stroke rate (min.): 250 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3800 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toSLIDE (MECHAN. PRESS)  stroke rate (min.): 200 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 20 toSLIDE (MECHAN. PRESS)  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 38 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 1800 /minSTRIP-FEEDER  feeder type: roll feeder ELECTRICAL SPECIFICATIONS  total power consumption: 20 kWDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgCoil Reel&Straightener KOHLER (option)

CONTROLS  electronic controls PRESS DESIGN  frame design: 4 column PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 800 mmSLIDE  slide force: 400 to  table surface (left-right): 1200 mm  table surface (front-back): 800 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 290 mm/s  working velocity min.: 25 mm/s  return velocity max.: 290 mm/s  return force: 35 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2255 mm  space requirements -front/back-: 1660 mm  t ...

PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion  ...

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6   table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted ... mais informação

CONTROLS  PLC PNEUTRONIC PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 13 mmV-RING  nominal force: 75 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mmSTRIP-FEEDER  feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...