subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
CONTROLS PLC SIEMENS FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 35 mm length min.: 70 mm lenght max.: 250 mmThe system is designed for hardening, drying and oiling cam tubes.The bunkers are loaded and unloaded manually. The system automatically removes the cam tubes from the loading bunker and places them automatically in the unloading bunker. The cycle time depends on various parameters, such as workpiece length, workpiece diameter, number of hardening zones, lengths of the hardening zones and the hardening depth.The complete system consists of:1 x base frame with collecting tray for the quenching medium 1 x lifting beam for simultaneous infeed and outfeed of the cam tubes 1 x horizontal slide with servo geared motor for holding the HF oscillating circuit transformer for 4-fold inductor and 2x 4-fold shower ...
CONTROLS CNC controls AGIE WORKING RANGE -WIRE CUTTING- worpiece length max.: 750 mm worpiece width (max): 550 mm X-axis travel: 350 mm Y-axis travel: 250 mm U-axis travel: 70 mm V-axis travel: 70 mmTABLE workpiece load (max): 450 kgWIRE SYSTEM wire diameter (min): 0.2 mm wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 2200 mm total weight approx.: 2500 kg
The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible. ... mais informação
Max. operating temperature: 200°C, usable space: 4.42m³, steam room volume: 5.6m³, volume flow: 9.87m³/min, heating output: 30kW, nominal output: 32.2kW. ... mais informação
Max. load: 800kg, weight: 2.55t, the machine needs overhauling, the generator is defective, an inspection is possible. ... mais informação
Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible. ... mais informação
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.
Volume flow: 4.44m³/h, fan rotational speed: 1400/min, motor power: 2x 1.5kW, without accessories, spare parts or documentation. ... mais informação
Max. batch weight: 100kg, heating output: 59kW, with documentation, was maintained regularly, an inspection is possible. ... mais informação
Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. ... mais informação
Length: 354mm, width: 79mm, height: 122mm, weight: 1.129kg. ... mais informação
Capacity: 100l, max. operating temperature: 50°C, the machine is integrated into a container. ... mais informação
Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. ... mais informação
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.
LVD HSL 3100 x 6 mmCutting length: 3100 mm Max sheet thickness st 45: 6 mm Backgauge: 750 mm Adjustable cuttingedge: 0.5 > 3 mm Electric motor (power): 7,5 kW Length: 3500 mm Depth: 2200 mm Height: 2250 mm Weight: 5 ton ... mais informação
There are three identical machines available, year of construction machine 1/ 2/ 3: 1994/ 1996/ 1997. ... mais informação
length: 1100 mm width: 710 mm height: 810 mm weight: 1350 kg ... mais informação
Workpiece dimensions: 140x180mm, load: 21kg, length: 9300mm, width: 3400mm, height: 3500mm. ... mais informação
length: 2000 mm width: 2000 mm height: 3000 mm weight: 8,2 ton ... mais informação