subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 201)
Description: Tilting saw with PTO drive for conversion to a circular saw. 3-point suspension Untested / defects or incompleteness cannot be ruled outApprox. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 1,500 mm, weight approx.: 120 kg ... mais informação
Cutting depth:70 mmengine output:12.4 A, 220/380 V , 2 x 6 kWworking length:2500 mmdimensions of the machine ca.:3900 x 1100 x 1000 mmweight:1500 kg ... mais informação
Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single str ...
Description: Maximum blade diameter 300 mmmain motor: 2.21 kW, cutting height: 100 mm, cutting depth: 750 mm, swival range +/-: 60 °, Approx. Onsite Dimension. (l x w x h): 900 x 1,200 x 1,400 mm, weight approx.: 150 kg ... mais informação
Description: Blade length 5900 mm Table size 800x700 mmmain motor: 3 kW, Saw band length max.: 5,900 mm, roller diameter: 800 mm, cutting height: 500 mm, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 2,650 mm, weight approx.: 600 kg ... mais informação
Description: Maximum saw blade diameter: 400 mm Manual stroke and tilt adjustmenttable length: 3,200 mm, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,600 x 1,200 mm, weight approx.: 600 kg ... mais informação
Description: Primultini log saw flywheel width 1100 mm complete with accessory for refendino and blade sharpenerApprox. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 2,500 mm, weight approx.: 1 kg ... mais informação
Description: Upper table size 320x240 mm Maximum cutting height on table 35 mm Blade diameter 250 mmcutting height: 50 mm, cutting depth: 120 mm, swival range +/-: 45 °, Approx. Onsite Dimension. (l x w x h): 700 x 500 x 500 mm, weight approx.: 20 kg ... mais informação
Description: Power 0.12 Hp Grinding wheel diameter 150 mmApprox. Onsite Dimension. (l x w x h): 600 x 500 x 2,800 mm, weight approx.: 50 kg ... mais informação
Description: Power 1.2 Hp Blade diameter 250 mm Upper table size 380x290 mmcutting height: 50 mm, cutting depth: 100 mm, swival range +/-: 45 °, Approx. Onsite Dimension. (l x w x h): 500 x 400 x 500 mm, weight approx.: 15 kg ... mais informação
Description: Double mitre saw for panel maximum width 2500 mm blades d.300 mm with trolleyApprox. Onsite Dimension. (l x w x h): 3,000 x 800 x 1,000 mm, weight approx.: 1 kg ... mais informação
Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shi ...
Sliding Table Saw Sizing Saw Make Panhans Type 685A Machine No. 371554 Built in 1973 Sliding carriage length 2600 mm Sliding carriage with new rollers in the guide Cutting width to the right of the saw blade 1000 mm Motor power 5.5 kW Speeds 3000/4000/6000/8000 rpm. Adjustable via V-belts Saw blade bore 30 mm Saw blade diameter with splitting wedge maximum 350 mm Saw blade without splitting wedge maximum 450 mm Cutting height for saw blade diameter 450 mm, maximum 155 mm Cutting height for saw blade diameter 350 mm, maximum 105 mm Dimensions 2600 mm x 3200 mm x H 900 mm Shipping Dimensions 2600 mm x 1700 mm x H 1200 mm Weight with pallet 680 kg
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x7.5kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X7.5 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x9.2kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X9.2 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
3-SAW PLATFORM (EXTENDABLE) WALTER FWR 500 (3x5.2kW) min. length of the material after formatting 2x800 mm max. material length after formatting 2x1200 mm max. material width 480 mm max. material thickness 145 mm circular saw diameter 500 mm power of spindle motors 3X5.2 kW saw rotation speed 2850 rpm 1.5 kW shaft drive motor power 1.5 kW feed drive motor power rotational speed of drive motors 1425 rpm feed speed continuously adjustable 0-20 m / min mains voltage (50Hz) v 3X400 overall dimensions length / width / height mm 3980/2440/1400 machine weight kg 1700
Description: Double-headed with automatic pneumatic cutting system Maximum cutting width 2800 mmApprox. Onsite Dimension. (l x w x h): 3,600 x 8,500 x 1,300 mm, weight approx.: 350 kg ... mais informação
Description: Panel Saw Euromac Tempus Working width: 2600 mm Maximum cutting thickness: 120 mm Feed speed: 5-80 m/min Return speed: 80 m/min Main blade diameter: 400 mm Scoring blade diameter: 200 mm Main motor power: 18 kW Engraving motor power: 2.2 kW Number of clamping collets: 7 Diameter of clamping collets: 80 mm Automatic lubrication systemApprox. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 1,300 mm, weight approx.: 100 kg
Description: Cutting capacity 800 mm Fully restored motor Blade 300 mmApprox. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,400 mm, weight approx.: 200 kg ... mais informação
Description: 350 mm diameter blade Cutting capacity 900 mm Rope for automatic carriage returnApprox. Onsite Dimension. (l x w x h): 1,300 x 1,700 x 1,500 mm, weight approx.: 200 kg ... mais informação