subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 112)
max. workpiece diameter: 250 mmthreading length: 800 mmmax. module: 8 min. module: 1 total power requirement: 10 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3,05x1,75x1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
max. wheel diameter: 400 mmgear width: 250 mmmax. module: 8 min. module: 0,5 root circle diameter: 10 mmnumber of teeth: 5 - 999 max.helical angle: +/- 45 °weight: 12.5 tcontrol: Siemens 840 DMachine is in very good condition, test reports available.CNC Siemens 840 DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...
cone distance (outside): 645 mmmax. gear pitch diameter: 650 mmnumber of teeth: 999 total power requirement: 99 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3 x 3 x 4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mAccessories:Change gearsMilling arborsOperating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m ... mais informação
Workpiece dimensions: 360 mmmax. workpiece diameter: 360 mmmodule: 8 mmx-travel: 400 mmy-travel: 240 mmz-travel: 360 mmmilling head -swivable +/-: 45 °diameter of hob: max. 175 mmmilling spindle turning speed range:: 75-600 U/min.: 40 KVAcontrol: 840C Siemensdimensions of the machine ca.: 3,10 x 2,40 x 2,70 mweight: 9 ttotal power requirement: 25 kWwork piece revolutions: zweigänig 0,2-60 U/mincounter-stay slide: 450 mm VerfahrwegSiemens Sinumerik 880 M - controlpartial gearbox double threaded, automatic workpiece feeding, conversational programmVideo link:https://www.youtube.com/watch?v=GkQs8lfeNYkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mmgear width: 275 mmgear width: 275 mmmax. module: 6 weight of the machine ca.: 5,3 tshifting: 100 mmdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...
Ref. -No.: 10103Manufacturer: MAAGYear of construction: 1976Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SchweizMinimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mmMax. Pile driving: 225 mmMax. Wheel Diameter: 750 mmMin. Wheel Diameter: 30 mmTable Diameter: 500 mmMax. Module: 10 mmMin. Module: 1 mmSpiral Angle: 0/60 °
max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 20 - 2650 mmgear width: - mmmax. module: 32 distance between centres: 1850 workpiece weight max.: 10.000 kgMachine can be inspected under power.Setting-up and installation at the customers is possible against extra charges.Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 400 mm: 18010 shaving cutter - diameter: 64 - 320 mmindexing: schleifbar 1 -12 Modulshaving wheel width: max. 40 mmnumber of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mmslide speeds: 5-20-30-40 Zähne/min.max. dia. of grinding wheel: 762 mmgrinding wheel - swivable: 5-21 °grinding slide swivable +/-: 2 x 35 °total power requirement: 3 kWweight of the machine ca.: 4,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 40 - 160 mmgear width: 90 mmcontrol: Siemens Sinumeric voltage: 400 Vfrequency: 50 Hzconnected load: 34 kVAloading: 800 Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação