tornos usadas para venda

Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... mais informação

Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... mais informação

There are 2 lathes available. Oerlikon, year of manufacture: 1980s. Heidenreich & Harbeck, year of manufacture: 1962. On-site inspection is possible. ... mais informação

Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm. ... mais informação

turning diameter: 660 mmturning length: 1.542 mmcontrol: MSX-701 III greates pass round over bed: 730 mmspindle passage: 80 mmdist. between centers: 1.862 mmX1: 750 Z1: 1.550+100 mmX2: 195 mmZ2: 1.525 mmy-axis: +-210 mmb-axis: +- 120 mmcoolant tank: 640 l: Number of spindles: 2 St.total power requirement: 90 kVAweight of the machine ca.: 25 tdimensions of the machine ca.: 6.800 x 3.200 x 2.900 mmRapid traverse rate (X1, Z1 Axis) 50 m./min.Rapid traverse rate (X2 Z2 Axis) 30 m./min.Rapid traverse rate (Y Axis) 30 m./min.Rapid traverse rate spindle 2 ZS 30 m./mm.Rapid traverse rate B axis 40 rpmRapid traverse rate C axis 250 rpmSpindle 1:Speed 4.000 rpmNumber of speed ranges 2Nose JIS A2-8C axis in spindle 1 IMin indexing increment spindle 1 0.0001ºPower 26/22 kWMax torque 724 Nm3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm.Chuck h ...

For sale: Robust Hyundai-Kia CNC lathe type SKT-400LC. This high-performance machine is equipped with flat guides in the Z and X axes. The chuck diameter is 381 mm (15 inches) with a bar capacity of 117 mm. The main motor power on the spindle is 37/30 kW. in combination with a 2-speed gearbox. The turning diameter above the bed is 725 mm, the turning diameter above the cross slide is 535 mm, and the maximum turning diameter is 630 mm. The maximum turning length is 2,120 mm. The turret is a 10-position turret with a so-called block mount. . The machine's own weight is just under 11,000 kg. This is a 2-axis CNC lathe available at short notice, subject to intermediate sales.

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,  ... mais informação

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

well-preserved, used NEF 600 Siemens Sinumerik 840 D control system Year of construction 2006 Switch-on hours 20000 h Conveyor Power chuck Schunk Spindle bore 90 mm Turret 8 positions Motor power 18 kW Machine weight 5000 kg Machine dimensions LxWxH 3600x2140x1845 mm Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

well-preserved, used NEF 400 Siemens Sinumerik 840 D control system Year of construction 2007 Switch-on hours 16000 h incl. 3-jaw wedge bar chuck Röhm Spindle bore 79 mm Turret 8 positions Rapid traverse X-axis 20 m/min Rapid traverse Z-axis 24 m/min Drive power - spindle motor 11.5 kW Tailstock displacement 550 mm Pick-up cone in the tailstock quill MK4 Quill diameter 80 mm

The machine is in good technical condition, after prior agreement it is possible to test it. ... mais informação

The machine is in good technical condition. Circulating diameter above bed: 400mm Circulating diameter above support: 220mm Distance between spikes: 1500 Max. weight of the workpiece: 600 kg Weight of the machine: 1550 kg Upon prior agreement, the possibility of inspection in operation. ... mais informação

The machine is in good technical condition. Circulating diameter above the bed: 550mm Distance between points: 3000mm Accessories: chucks, lunettes Weight: 3220kg Possibility of inspection in operation by prior arrangement. Year of manufacture/SO/GO: 1979/-/1993 ... mais informação

number of spindles:6 spindle passage:51 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: S51 PCYob: 2008Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmhirth-coupled spindle drum,Control: Software SICS 2000 / Windows 2000 / Beckhoff TwincatPosition I: cross slide X-I; longitudinal slide Z-IPosition II: compound slide cross XZ-II; longitudinal slide Z-IIPosition III: compound slide cross XZ-III; longitudinal slide Z-IIIPosition IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IVPosition V: cross slide X-V; compound slide longitudinal ZX-VPosition VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VICoolant tank with hinged belt chip conveyor;Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar;Workpiece collecting device with belt conveyor (low-damage workpiece ...

The machine is in good technical condition. Parameters: Turning diameter above the bed (max): 840 mm Turning diameter above the support (max): 530 mm Total power: 18.5 kW Distance between the tips: 1250 mm Weight of the lathe: 5700 kg Inspection possible by prior arrangement. ... mais informação