máquinas de fiação, torção, bobinadoras, esticadoras usadas para venda

NUMBER 372 SPINDLES  ... mais informação

Number 56 positions  ... mais informação

Perfect condiction  ... mais informação

NUMBER 60 POSITIONS  ... mais informação

Number 72 spindles for preparation alluminium spools  ... mais informação

Number 256 spindles type M4 Eletric device final bobin 170mm motor 18.5 Kw  ... mais informação

SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

Perfect guarantee  ... mais informação

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

NUMBER 60 POSITIONS SECTION 6 ALIMENTATION BOBIN-BOBIN LOAPFE TK830N SPLICER 4924E CYLINDRICAL DRUM TYPE BLOWER AUTODOFFING  ... mais informação

AIR COVERING MACHINES NUMBER 36 POSITIONS HEBERLEIN JET RUNNING CONDICTION  ... mais informação

NUMBER 18 POSITIONS. COMPLETE WITH 18 PEYER 123 CLEARES AND 3 CONTROL UNITS WHICH RESPECTIVELY SEND 9 HEADS , 6 HEADS AND 3 HEADS TO PROCESS 3 DIFFERENT YARNS AT SAME TIME. COMPLETE YARN TENSIONERS.  ... mais informação

NUMBER 15 POSITIONS COMPLETE WITH 15 PAYER 123 CLEARERS WITH 2 UNITS CONTROL. THE CONTROL UNITS SENT ONE 9 HEADS AND THE OTHER 6 SO THAT 2 SEPARATE YARNS CAN BE MADE AT THE SAME TIME. COMPLETE WITH SLIDE FOR AIR KNOTS AND 2 SPLICERS FOR KNOTS.  ... mais informação

NUMBER 15 POSITIONS COMPLETE WITH 15 PAYER 123 CLEANERSAND 2 CONTROL UNITS WHICH SEND 9 HEADS AND 6 HEADS RESPECTIVELY TO MAKE 2 DIFFERENT YARNS AT SAME TIME. THIS ISCOMPLETE WITH A THREAD TENSIONER ON THE ENTIRE MACHINE. SLIDE FOR COMPRESSED AIR AND 2 SPLICERS. ELETRONIC WINDERS WITH GROOVED DRUM FOR THE PREPARATION OF PACKAGES FOR DYEING WEAVING KNITTING SOCKS AND WARPING WITH OR WITHOUT WAXING, WITH OR WITHOUT PRESET METER.

TYPE 1 Y WALNUT SPINDLE 42 MOLDED COLLAR CHALICE 135MM TYPE 2 Y SPINDLES 35 SHAPED COLLAR CHALICE 135MM  ... mais informação

WINDING MACHINES NUMBER 24 POSITIONS FINAL BOBIN 180 - 230 MM COMPUTER CONTROL PERFECT  ... mais informação

ELECTRIC SCHEDULE FOR DP2 AIR JET MACHINES RUNNING CONDICITONS CONTROL SSM TECNICAL  ... mais informação

NUMBER 25 POSITIONS AUTODOFFING HEBERLEIN JET RUNNING CONDICITIONS ALL MACHINES PERFECT SUPERIORE CREEL  ... mais informação

AIR JET MACHINES NUMBER 25 POSITIONS HEBERLEIN JET  ... mais informação