termoformadoras usadas para venda

There are two Thermoforming Machines TETRA LAVAL 3000 available, current: 30A, voltage: 380V, yera of construction machine 1/ 2: 1995/ 1996. ... mais informação

Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts. ... mais informação

Output: 8-10 cycle/min, film width: 524/ 520mm, controls: SIEMENS SIMATIC S7-300. ... mais informação

With Thermo Transfer Printer VIDEOJET DataFlex 6530 and Multi Head Scale NEWTEC, number of heads: 9. ... mais informação

Max. draw depth: 60mm, top/ bottom film thickness: 60-100/ 350-500μm, length: 9035mm, width: 925mm, height: 1940mm, operational hours counter: ca. 22,000h, with documentation. ... mais informação

Was used for packing syringes, speed: 14 cycle/min, cut-off length Injectomat without/ with cannula/ other: 200/ 255/ 285mm, paper width at 60gr/m²: 415mm, film width 75/75 CPP/ PE: 421mm, blister: 6-lane, length: 6500mm, with Inserter Müller & Kurz, year of manufacture 1991 and Flexographic Printer Amaco DV 131, year of manufacture: 2006.

Including format sets and vacuum pump, was not maintained regularly. ... mais informação

Max. draw-off length: 320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5500mm, width: 1200mm, height: 2000mm, without tools. ... mais informação

Draw-off length: 225-320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5300mm, width: 1100mm, height: 2200mm, without tools. ... mais informação

Nominal power: 19kW, an inspection is possible. ... mais informação

Max. Output: 12 cycles/min, film widths: 320/360/420/460/520mm, take-off lengths: 200 - 420mm. Max. Drawing depth: 190mm, top film: max. 300µm, compressed air: min. 6 bar. Including two format sets (round cups and square cups), as used for dips for chicken nuggets or ready-made salads. Outer dimensions X/Y/Z: approx. 6200/1200/2200mm, weight: approx. 2800kg incl. accessories. On-site inspection is possible.

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600  ... mais informação

Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006  ... mais informação

Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters  ... mais informação

Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available  ... mais informação

Full packing line available used in the cheese industry., This line has been very well maintained and is in a superb working condition., The line has been professionally taken out production and stored in our warehouse., Have a look at the video for an overall impression of the line, please reach out for more information., - Weber CCA in-line system., - 2 lane to 4 lanes, - Multivac R530 thermoformer, - Film width; 600m, - Advance; ±600mm, - Top and bottom labeler with a printer for the bottom label, - Jumbo film holder, - Mark-reader for pre-printed film, - Robert-pack pick and place robot

Multivac R535 thermoformer, very very well maintained 2012 machine., Machine with a very consistent high output., Available straight from production late April 24, - Rigid bottom film, - Possible rigid top-film for a lid, - Top and bottom labeler with printer for the bottom labeler., - 600 mm film width, - ±600 advance/ stroke.

GEA packaging machine PowerPak RT Type 2, year of construction 2015, with upper and lower web labeller, Tirolabel TL150 and B 150,, max. label width: 150 mm,, LPM 107 - label printer with ribbon,, maximum power 33 kW, without vacuum pump,, 420 mm working width,, 390 trigger,, rigid film,, 60 mm drawing depth,, Jumbo rolls - processing, double roll unwind top film,, Format 3.2 - one peel corner per pack,, Seal shape with perforation, for MAP (back gassing), only approx. 1,800 operating hours!, power: 33 kW

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good  ... mais informação

Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.