Fabricante:
(Categoria: 209)
Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h. ... mais informação
Laser type: CO2, Rated power: Originally 200W, upgraded to 400W, Working range X/Y: 1300mm/1600mm. Material capacity: Plywood, MDF, cork, wood products, cardboard, paper, various plastics, textiles, acrylic glass. Dimensions X/Y: 2080mm/2300mm. Maintenance: August, 2023 - Laser power: 240W. Overhaul of beam source recommended. Including laser cooling with hoses and control cable, PC workstation with CAD program Casmate 6. Operating hours: 75783h. Documentation available.
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... mais informação
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h. ... mais informação
An inspection is possible. ... mais informação
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... mais informação
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. ... mais informação
Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t. ... mais informação
A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.
Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. ... mais informação
The machine has received a new rotor, with spare parts and documentation, without electrics and controls, an on-site inspection is possible. ... mais informação
Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible. ... mais informação
Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.
A circular beam saw with approx. 3m roller conveyor to the left and right of the machine. Max. Cutting width: 840mm, max. cutting height: 280mm, speed: 1500rpm, saw diameter: 750mm, table dimensions: 1560mm/1560mm/940mm. Saw blade swivel 90° - 30°, extraction nozzle under/above the table: 160mm/100mm. Documentation available.
Includes a loading table, a single-sided sizing and edge processing unit (KFL 23) lengthwise/crosswise and a return unit. For sizing and edge processing of worktops, side panels and shelves in small batches up to batch size 1. Workpiece parameters: Length range: 300-4500mm for worktops, 250-2600mm for side panels/shelves, 250-3100mm for niche back panels. Width range: 240-1200mm, thickness range: 12-60mm. Workpiece weight: max. 50kg. Material: chipboard, MDF. Surfaces: Melamine, laminate, CPL 0.6-0.8mm. Documentation available.
Thermo-Kaschieranlage Fabrikat: BÜRKLE Typ: FFAII 1300 Baujahr: 2001 Technische Daten: Arbeitsbreite: 1300 mm Plattenabmessungen Breite: 200 - 1300 mm Länge: 400 - 3000 mm Dicke: 8 - 40 +/- 0,2 mm Folienabmessungen Breite max. 1320 mm (seitl. Überstand bis 20mm) Rollendurchmesser 76 bzw, 152 mm (3 bzw. 6) Arbeitshöhe über Flur: 940 mm Anlagengeschwindigkeit: 15 - 45 m/min Drehstromantrieb mit Vector-controll Bedienungsseite: rechts Plattendurchlauf: zentrisch Anlagenaufbau FFAII 1300 - Bürstenmaschine DBM (Kettbürsten) - Vorheiz- und Glättkalander GKL, D = 500 mm - Thermoölerhitzer 36 kW - Härterauftragsmaschine DAH + komplettes Härterumlaufsystem mit Überwachung - Transportstrecke + IR-Zonen mit Temperatursensoren - Kleberauftragsmaschine DAK + autom. Niveau-Abtastung - Kühlgerät für DOW-Kühlung - Leimzuführung - Konus-Transportstr ...
New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg
Tool adapter for clamping Flange Brand: Atemag Type: Function Line ER25, ER32, Saw Adapter ... mais informação
CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular