subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 303)
Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg. ... mais informação
Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours ... mais informação
Single-station machine for containers up to 10 ltr. Extruder 60/24D. Single head with viewing stripes. Clamping force 110 kN. Canisters were produced with viewing strips in 2.5 and 5 ltr ... mais informação
Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English ... mais informação
Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free ... mais informação
Description: engine power: 80 kW heating power: 49 kW max. hydraulic pressure: 250 bar max air pressure: 10 bar working pressure: 330 bar mould clamping: ,450 x 850mm  , general overhaul in 2008  , detailed dimensions in attached PDF document 2 trucks required for transport Approx. Onsite Dimension. (l x w x h): 5,500 x 1,700 x 3,400 mm, weight approx.: 19,900 kg
used double head, with WDS adjustment, in good condition. Stitch 125 mm, nozzles up to 55 mm. ... mais informação
year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request! ... mais informação
This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German). ... mais informação
This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN. ... mais informação
Preheater VN 1000, year 2008 Automatic continuously operating with the size of the foaming vessel 975x3000 mm, Stirrer drive power 15 kW Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm on: - made of stainless steel - preliminary bunker for raw materials 250 l, - dosing screw adjustable - foaming vessel with heat insulation layer to reduce condensation - heated bottom of the chamber with on / off. To shorten condensation - mixer with stainless steel breakers, chrome - removable, fixed breaker, - precise dosing of the chamber with an adjustable auger and dosing funnel, - safety device when disconnected electric current - detached electronic control unit, - bimetal thermometer inside the blowing agent. The performance of the blowing agent depends on the quality of the feedstock, with a European material standard: - at a density o ...
SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...
Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new ... mais informação
We sell a factory for the production of PET containers. Brand: TEREKAS (Litva) Model: TFA-3 Release year: 2006 Productivity: 3100 bph Power: 50 kW Rated Power: 30 kW Kit: blow molding machine TFA-3 Airpol compressor station high pressure compressor booster dehumidifier chiller 2nd high pressure tanks preform loading manipulator preform conveyor preform hopper preform loader molds (7 sets)
Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.
The 2017 Mikformen TM800/3 is a versatile plastic thermoforming machine designed for sale. With a weight of 13,000 kg, this robust and precise machine offers a compact design, measuring 11.50 meters in length, 2.75 meters in width (including the electrical cabinet), and 2.85 meters in height. It is specifically designed for plastic thermoforming processes, with a maximum sheet width of 840 mm (with a 60 mm stretch) and the ability to handle sheet thicknesses ranging from 0.2 mm to 3.0 mm. The TM800/3 features a maximum product height of 130 mm in both positive and negative directions, and it achieves a cycle speed of 75 cycles per minute during dry-run operations. Equipped with powerful pressure forces of 60,000 daN for the forming station, 75,000 daN for the punching station, and 80,000 daN for the cutting station, this machine delivers precise and efficient results in plastic thermofor ...
Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...
Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould ...