tornos usadas para venda

Lathe with bezel and two heads.  ... mais informação

CNC controller: MSX-850 (MAPPS III) Capacity Turning length mm: 1.260 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: ø825 Bar work capacity mm: 90 Upper turret X-axis travel mm: 280 (210+70) Z-axis travel mm: 1.370 Number of tool slots St .: 10 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 Indexing time s: 0,3 Main spindle Speed ​​spindle rpm: 3.000 Drive power spindle kW: 22/18,5 Spindle bore mm: 105 Chuck type: B 212 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 1.284 Holder: MK4 Coolant system High-pressure bar: 5 Equipment Chip conveyor High pressure pump Workarea light Interface for Bar feeder Working time hours Spindle 1: 4799 Rated power kVA: 38,7 Basic machine dimensions / weight Length mm: 4.600  ...

Lathe POTISJE PA30/4000  ... mais informação

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Ma ...

Catalog No. : 7528 Type: SL-20HE Producer: HAAS Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm Weight: 4082 t Equipment: Set of holders Chip conveyor

3 pieces with SEICOS 21L Control -serial 486 (2001) with driven tools - no barfeed -serial 326 (1999) with driven tools - Iemca Boss 542/32 (2001) -serial 050 (1998) no driven tools - Iemca Boss 542/32 (1998) each with tail stock and chip conveyors - very well equipped  ... mais informação

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... mais informação

Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... mais informação

Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... mais informação

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... mais informação

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mmturning diameter over slide rest:345|480|680|880 mmturning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mmtravel of cross-slide cross:370|420|520|620 mmmovement of the upper support:200 mmbed width:600 (Monoblock) mmspindle bore:105mm (130 oder 155 opt.) mmspindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/minmetric threading:1~240 mmfeeds - longitudinal:0.1~24,3 mm/minfeeds - cross:0.05~12,5 mm/minrapid traverse longitudinal and cross:4000, 2000 mm/minturning tool - shaft cross cut:32 x 32 mmtailstock quill diameter:100 mmtailstock quill stroke:240 mmtaper in tailstock:6 MKmain drive motor:11 (15 kw opt.) kWmax. workpiece weight between centers:3000 kgWeight approx.:4t bei Spitzenw. 1000mm ( ...

Including chip conveyor. ... mais informação

:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mmswing diameter:1350|1600|2000|2500 mmturning height:1070|1350|1350|1700 mmmax. turning diameter:1150|1350|1800|2300 mmtable load:4|5|8|10 ttable rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/minmax. torque on the faceplate:10000|12500|18500|54000 NmTravel of Ram (vertical):800 | 900 | 900 | 1000 mmTravel of ram (horiz.):1350 | 1475 | 1650 | 2275 mmram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mmrapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kWMachine height: 5330 |5500 |5500|6600 mmmachine length:4600 |4700 |5050| 4950 mmmachine width:5500 |5800 |6300|7320 mmweight of the mac ...

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmcentre distance:2500 mmspindle turning speed range:22,5 - 1120 U/minspindle motor:15 kWfeeds - cross:0,018 - 1,25 mm/Uweight of the machine ca.:6,0 ttotal power requirement:19 kWdimensions of the machine ca.:4,0 x 1,4 x 1,6 mMachine equiped with:- Heidenhain digital readout- 2 steady rests- rapid traverse- 3-jaw chuck, faceplate- splash cover- Multifix rapid tool changing system

Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling. ... mais informação

:YS-VL-3000 faceplate diameter:3000 mmswing diameter:3500 mmturning height:1650 mmmax. turning diameter:3400 mmtable load:40 ttable rotation speed:2-40/41-120 U/minmax. torque on the faceplate:64500 NmTravel of Ram (vertical):1000 (1400 opt.) mmTravel of ram (horiz.):2775 mm ram head dimension:280x280 mmrapid power traverse in X-and Z direction:10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) tool taper:SK50/BT50 drive capacity - spindle motor:60/75 (75/100) kWMachine height:6700 mmmachine length:6100 mmmachine width:8700 mmweight of the machine ca.:69000 kgrepeating accuracy:0,005 mmhydraulic motor:3,75 kWservo motor X-axis:7 kwservo motor Z-axis:7 kwcoolant pump drive:2,2+1,1 kW:150 kvaCNC controller:Siemens/Fanuc/Fagor coolant system:700 Literautomatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Siemens/Fanuc/Fagor ATC:320 ...