trabalho de chapa metálica usadas para venda

Plasma Cutting Machine MicroStep MG-PrB 6001.20 + S1200 – Retrofit with drilling rig and pipe cutting system Year of construction: 2010 – Retrofit 2021 Working area: 6,000 x 3,200 mm, including 1,200 mm pipe shaft 1x pipe cutting device: 100 – 700 mm 1x Plasma Rotator Plasma Power Source: Hypertherm HPR 260XD 1x fully automatic drilling spindle: up to 30 mm drilling and up to M20 threading (8-fold tool changer) Filter system: Donaldson DFPRO 8

CNC firing and drilling system STAKO Novum Year of construction: 2010 Working area: 4,000 mm x 2,000 mm 1x Plasma Power Source with Hypertherm HPR400 1x oxy-fuel torch 1x drilling unit up to 20 mm including tool changer  ... mais informação

Press brake TRUMPF TrumaBend V 230 Year of construction: 2003 Working width: 3,000 mm Pressure: 230 To Stroke: 365 mm Operating pressure: 305 bar Delay time: 95 ms Safety distance: 190 mm Weight: 18.210 kg Voltage: 3 x 400 V Nominal current: 68 A Frequency: 50 HZ Connected load: 27.2 KVA Compressed air: 6 BAR Stop: 2 x X, 2 x Z, 2 x R – Axis, 2 x Y 1x sliding matrix

Inv. Num. : 7516 Type: 9XVD-55 Producer: Flow Created: 1997 Parameters: The machine is in good technical condition.  ... mais informação

Fast Electric Press Brake C9HS - High Speed CoastOne - Made in Finland Pressing force: 30T Y-axis, feed speed 250mm/s X-axis, speed 1000 mm/s Bending length: 900mm Spindles: 1x30T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Press brake tool holder: manual type WILA / Trumpf / type B / R2 Front folding support table Light work area front and rear 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Electric Press Brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Back gauge: X-R-Z1-Z2 controlled Control: TC15-2D Graphics Control Front support arms, height-adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Other equipment options on request Warranty: 36 months after installation

Electric Press Brake C12 CoastOne - Made in Finland Pressing force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 4-axis controlled X-R axes Press brake tool holder: Quick clamping system TEDA top AMADA / Promecam / Type A / Type R1 Light in the front work area Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: AMADA Promecam / Type A / Type R1 Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Offer 24162 Specifications: - max. working width 3050 mm - max. cutting capacity - at 400 N/m² strength 6 mm - at 700 N/m² strength 4 mm - Adjustable cutting angle - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 32 per/min - Drive 400 V / 12 kW - Table height approx. 800 mm - Space requirements incl. back gauge, without front support arms -ca. W 3800 x H 1950 x D 3200 mm - Transport width approx. 2200 mm - Weight approx. 6000 kg - With: - E - foot switch - Sheet metal holding -Mot. Material Conveyor Belt - Cutting length adjustment - Cutting line illumination

sheet width: 3000 mmplate thickness: 3 mmweight of the machine ca.: t3 support arms1 angle stoppneumatic hold-down deviceBackgauge to be operated by handThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

sheet width: 3200 mmplate thickness: 2,5 mmweight of the machine ca.: 3,5 tTools recentely grounded.Bending angle preselection via potentiometerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton  ... mais informação

Coil weight: 2 x 500 kg Material width: 300 mm Coil exterior diameter: 1200 mm Expansion range: 350 - 610 mm Weight of machine approx.: 2,2 ton  ... mais informação

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg  ... mais informação

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton  ... mais informação

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Working hours laser on: 26212 (09/2023) h Working hours beam on: 18905 (09/2023) h Laser power: 3000 Watt Working range laser: 3000 x 1500 x 115 mm Max. steel: 20 mm Max. stainless steel: 15 mm Max. aluminium: 6 mm Max. copper: 6 mm Max. brass: 6 mm Length: 9350 mm Width: 4600 mm Height: 2200 mm Machine weight: 12000 kg