máquinas injetoras usadas para venda

Operational pressure: 210bar, weight: 4t, with documentation, without accessories. ... mais informação

Operational hours counter: 59,129h, with Handling PSA 2080. ... mais informação

Hydraulic pressure: 210bar, weight: 3.1t. ... mais informação

Hydraulic pressure: 210bar, weight: 3.7t. ... mais informação

Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm. ... mais informação

Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021. ... mais informação

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. ... mais informação

Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. ... mais informação

Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation. ... mais informação

Screw diameter: 35mm, max. opening path: 350mm, length: 5017mm, width: 1565mm, height: 2156mm, weight: 6t, operational hours counter: 124,862h, with hydraulic core pull, 2x air valve DS, hydraulic valve gate and documentation. ... mais informação

Screw diameter: 30mm, max. opening path: 350mm, tool clamping plate dimensions: 446x446mm, weight: 2.25t, operational hours counter: 81.353h, with machine hopper, hydraulic core pull, air valve DS, pneumatic valve gate and documentation. ... mais informação

Screw diameter: 25mm, max. opening path: 275mm, tool clamping plate dimensions: 400x400mm, weight: 1.9t, operational hours counter: 111.519h, with hydraulic core pull and documentation. ... mais informação

Screw diameter: 22mm, max. opening path: 275mm, tool clamping plate dimensions: 400x400mm, weight: 1.9t, operational hours counter: 78,700h, with machine hopper, hydraulic core pull and documentation. ... mais informação

Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.

Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.

Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: 7.9t, operational hours counter: 65,200h, with Krauss Maffei LR100, 6x hoist channel control points, 4x core pull, blow-out unit, pressure accumulator, separating flap, energy saving circuit, ALS interface, 20mA interface and colour metering unit interface.

CONTROLS  CNC controls UNILOG B6 MOULD CLAMPING UNIT  locking force: 160 to  die opening stroke max.: 650 mm  mould height min.: 300 mm  mould height max.: 950 mm  max. distance between tool-plates: 950 mm  space between tie bars L1: 570 mm  space between tie bars L2: 520 mmINJECTION UNIT  Diameter of screw: 40 mm  Injection pressure: 2100 bar  Shot volume: 251 cm³  Shot weight max. (Polystyrol): 228 gHYDRAULIC UNIT  oil volume: 400 ltrELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 5000 mm  space requirements -front/back-: 1650 mm  total height: 2140 mm  total weight approx.: 7300 kgMachine in very good condition (= ph ...

Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible. ... mais informação

CONTROLS  CNC controls UNILOG B6 MOULD CLAMPING UNIT  locking force: 60 to  die opening stroke max.: 450 mm  mould height min.: 200 mm  mould height max.: 650 mm  space between tie bars L1: 370 mm  space between tie bars L2: 320 mmINJECTION UNIT  Diameter of screw: 25 mm  Shot volume: 61.4 cm³  Shot weight max. (Polystyrol): 55.9 gELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3515 mm  space requirements -front/back-: 1321 mm  total height: 1940 mm  total weight approx.: 3000 kg

There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible. ... mais informação