26 SCHOEN máquina utilizada para venda

pressure:60 t throat:400 mm stroke:600 mm Distance table/ram, stroke up:700 mm Table surface area:1120 x 700 mm table height over floor:850 mm Ram surface:700 x 700 mm Oil volume:275 l Power capacity:7,5 kW Weight:7,3 t Dimensions (WxDxH):1,6 x 2,0 x 3,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:200 t distance between columns:1050 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:1000 x 1200 mm table height over floor:850 mm side window:500 mm ram surface:1050 x 870 mm speed down:300 mm/s speed up:300 mm/s working speed:18 - 36 mm/s power requirement:37,0 kW weight:16,0 t dimensions (WxDxH):4,0 x 3,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

pressure: 250 t distance between columns: 600 mm stroke: - mm total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

CONTROLS   PLC SIEMENS SIMATIC OP 27 PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1000 mm SLIDE   stroke: 600 mm SLIDE (HYDR. PRESS)   return force: 38 to DIE CUSHION (TABLE CUSHION)   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS   total weight approx.: 43000 kg

CONTROLS   PLC SIEMENS SIMATIC OP 27 PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1000 mm SLIDE   stroke: 600 mm SLIDE (HYDR. PRESS)   return force: 38 to DIE CUSHION (TABLE CUSHION)   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS   total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 46131

CONTROLS   PLC SIEMENS SIMATIC OP 27 PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1000 mm SLIDE   stroke: 600 mm SLIDE (HYDR. PRESS)   return force: 38 to DIE CUSHION (TABLE CUSHION)   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS   total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 32510

CONTROLS   PLC SIEMENS SIMATIC OP 27 PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1000 mm SLIDE   stroke: 600 mm SLIDE (HYDR. PRESS)   return force: 38 to SLIDE EJECTOR / CUSHION   stroke: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS   total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 47037

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Prensa hidráulica, construída por volta de 1990

pressão: 7 t garganta: 180 mm curso: 100 mm área da superfície da mesa: 300x300 mm superfície RAM: furo de 105 mm na mesa: 60 mm altura da mesa: 1050 mm furo da ferramenta na ram: 30 mm requisito de potência total: kW dimensões da máquina ca.: BxTxH 1200x1200x2100 mm

pressure: 20 t distance between columns: 450 mm stroke: 100 mm table surface area: 440x320 mm ram surface: Ø140 mm hole in the table: Ø50 mm table height: 900 mm tool hole in ram: Ø40 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: BxTxH 1400x1200x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 25 t distância entre colunas: 800 mm curso: 100 mm dayligth: 450 mm área de superfície da tabela: 750x750 mm peso da máquina ca.: 3 t dimensões da máquina ca.: 1500x1500x2700 mm

Pressão: 25 t curso: 100 mm área da superfície da mesa: 440x320 mm Superfície RAM: 360x220 mm furo na mesa: 160x100 mm altura da mesa: 900 mm furo da ferramenta na RAM: 40 mm dayligth: 280 mm peso da máquina ca.: 1,5 t dimensões da máquina ca.: BxTxH 1500x1500x2100 mm

pressão: 200 t curso: 150 mm área da superfície da mesa: 850x650 mm superfície RAM: 730x560 mm peso da máquina ca.: 8 t dimensões da máquina ca.: BxTxH 2000x2500x3600mm m

pressão: 25 t garganta: 250 mm curso: 100 mm ram superfície: 500x400 mm furo na mesa: 110 mm altura da mesa: 850 mm furo da ferramenta na RAM: 40 mm Superfície RAM: 150 mm peso da máquina ca.: 2,5 t dimensões da máquina ca.: 1500x2000x2200 mm

pressão: 100 t garganta: 275 mm curso: 150 mm área da superfície da mesa: 860x550 mm superfície RAM: 600x400 mm altura da mesa: 810 mm furo da ferramenta na RAM: 50 mm dayligth: máx. 475 mm peso da máquina ca.: 7 t dimensões da máquina ca.: BxTxH 2000x2500x3300 milímetro

pressure: 100 t distance between columns: 625 mm stroke: 150 mm table surface area: 580x450 mm ram surface: 580x340 mm hole in the table: Ø 150 mm table height: 850 mm tool hole in ram: Ø 45 mm column travel -side: 200x200 mm weight of the machine ca.: ca. 6,0 t dimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 200 t distância entre colunas: 500 mm curso: 150 mm ram superfície: 320 mm área de superfície da tabela: 470x400 mm peso da máquina ca.: 12 t dimensões da máquina ca.: 2000x2000x2700 mm

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressão: 250 t distância entre colunas: 900 mm curso: 300 mm área da superfície da tabela: 850x900 mm superfície RAM: 800x880 mm curso: 300 mm altura da mesa: 1050 mm

pressão: 160 t distância entre colunas: 850 mm curso: 150 mm área de superfície da mesa: 850x650 mm potência total requisito: kW peso da máquina ca.: 7 t dimensões da máquina ca.: 2,5 x 2,5 x 3 m

Schon 8 LES hydraulic swing-arm clicker press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schon 8 LES hydraulic swing-arm clicker press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Schon 8 LES hydraulic swing-arm clicker press Price: 4750 EUR Download PDF Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutt ...