used ARBURG for sale

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length / diameter ratio: 23 L / D Max injection rate: cm³ / s Pressure on the material: 2500 bars Laminating capacity PS: Kg / h Screw Speed: 58 RPM Hydraulic motor torque: 560 Nm Hydraulic Motor Power: HP Nb Temperature Zones: N CLOSURE UNIT Closing force: 1300 kN Opening stroke: 650 mm Thickness Mold Mini / Max: mm Max distance between plate: mm Passage between columns: 470 x 470 mm Tray size: 715 x 715 mm GENERAL Heating power: 22 kW Total installed power: 38 kW Amount of oil: 260 l. Dimension: (WxHxD) m. Weight: 6380 Kg

Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.

Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Injection molding machine in very good condition, under the supervision of the manufacturers service since new. Included with the machine is a picker and a good/bad product metering device. The machine has German and Polish language preloaded. Short circuit force: 70T Auger diameter: 25mm Working area: 320 x 320 x 200-400 Control: Selogica Year of production: 2000 Motor: 11kW For sale 4 of the same machine. Price given for 1. Possibility to sell with additional tooling as in the last photo - Getech mill and chute. On request, it is possible to send videos of the operation of the machine.

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG

Clamping force [kN] 500 min./ max. mold height [mm] 200 Maximum opening width [mm] 450 injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 29 Dimensions and weight Net weight with control cabinet [t] 3.05 Dimensions (length x width x height) [m] 2.20 x 2

Arburg 320K 700-250 injection molding machine Year - 03/2004 PP materials used CLOSING UNIT Closing force (Ton) 70 Space between columns (mm) 320 × 320 Column diameter (mm) 60 Plate size (H x V) (mm) 476 × 476 Mold Height (Max.- Min) (mm) 400-200 Space between plates (mm) 650 Closing speed (mm / s) 88 (l / min) Opening stroke (Max) (mm) 250 Ejection force (kN) 30 Opening stroke (mm) 70 Cores (YES / NO) NO INJECTION UNIT Screw diameter (mm) 35 Injection weight (Max) (Material) (g) 121 Volume (cm3) 144 Injection pressure (bar) 1820 Injection rate (cm3 / s) 154 Nozzle force (Max) (Ton) 70 Nozzle stroke (Max) (mm) 240 Plasticization efficiency (g / s) 141 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37 × 1.405 × 1.99 Total energy consumption (Kw) 35 Robot Manufacturers  ...

Arburg 630S-2500-1300 Injection Weight: 826g Closing force: 2,500 kN Screw diameter: 70 Injection pressure: 1470 Column spacing: 630 x 630 Plate size: 900 x 900 Min mold height: 300-700 Type of control: Selogica German Installed capacity: 68 Weight: 14000 Dimensions: 6.7 x 2.3 Hopper: No Robot nest: Yes

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw

Arburg 420C-1000-250 without hopper, with gas boost Make: ARBURG Type: 420C-1000-250 Built: 1999 Control: Selogica Country of origin: Germany Screw Dia: 35 mm Swept Volume: 144 ccm Shot Weight: 121 g Injection Pressure: 1820 bar Clamping Force: 1000 kN Tie Bar Distance: 420 x 420 mm Platen Size: 570 x 570 mm Mould height min.: 250 mm Opening Stroke: 500 mm Total day-light max: 750 mm Power: 28,5 kW Workinghours: 40702 h Dimensions: 5 x 1,80 m Weight: 3180 kg Equipment Language: German Manual

Arburg 520C-1300-350 with bimetallic plasticizing system Shot weight: 194 g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 520x520 mm The size of the plates: 715x715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 95 616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes

screw size: 18 mm stroke of screw: max. 80 mm moulding weight: max. 17 g/PS closing pressure: 250 kN control: Arburg CNC opening capacity: 65 kN opening stroke: max. 275 mm mould space: min. 200 mm daylight between platens - max.: 475 mm distance between columns: 270 x 270 mm floor-plate width: 400 x 400 mm Ejector force: max. 15 kN stroke: 95 mm total power requirement: 24 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 3,5 x 2,0 x 2,0 m Injection Molding Machine ARBURG - Allrounder 270 S 250-60 - incl. mill (Getecha) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

screw size: 30 mm closing pressure: 600 kN total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m injection shot weight in Polysterol: g/PS Selogica control Technische Daten / technical details: Schliesskraft / closing pressure 60 to Innenbreite zwischen den Säulen / inner width between columns 370x370 mm Plattengröße / plate size 570x570 mm Werkzeugeinbauhöhe / workpiece daylight 250 mm Formöffnungsweg / mould opening stroke 500 mm Plattenabstand / plate distance 700 mm Einspritzeinheit: / injection device Schneckendurchmesser / screw diameter 30 mm Spritzdruck / injection pressure 247 bar Gesamtantriebsleistung / hole drive capacity 70 kW Gewicht der Maschine ca. / weight ca. 3450 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...

Ref. no.: 18239 Hersteller: ARBURG Year of construction: 2000 Clamping unit Clamping force: 100 ton Opening stroke: 575 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x 570 mm Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Shot weight: 126 g Injection pressure: 1820 bar Measurements and weight Dimensions: 4,3 x 1,65 x 2,1 m Machine weight: 4950 kg Further information: There are 3 screw in the machine. 25-30-35 mm one on the machine others screw will be delivered on a pallet

Ref. no.: 18397 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 X 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x 570 mm Injection unit Screw diameter: 40 mm Injection volume: 182 cm³ Shot weight: 153 g Injection pressure: 4,3 x 1,5 x 2,0 bar Measurements and weight Machine weight: 3430 kg

Ref. no.: 18396 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x570 mm Injection unit Screw diameter: 40 mm Injection volume: 182 cm³ Shot weight: 153 g Injection pressure: 2120 bar Measurements and weight Dimensions: 4,3 x 1,5 x 2,0 m Machine weight: 3430 kg

Ref. no.: 18273 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x 728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Ref. no.: 18271 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Ref. no.: 18368 Hersteller: ARBURG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 300 mm Mould height max.: 550 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 75 g Injection pressure: 2200 bar Measurements and weight Dimensions: 3,25 x 1.15 x 2,0 m Machine weight: 2250 kg

Ref. no.: 18286 Hersteller: ARBURG Year of construction: 2001 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 X 370 mm Mould height min.: 250 mm Opening width: 700 mm Platen size (h x v): 570 X 570 mm Injection unit Screw diameter: 35 mm Injection volume: 139 cm³ Shot weight: 117 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,06 X 1,39 X 2,12 m Machine weight: 3800 kg

Ref. no.: 18409 Hersteller: ARBURG Year of construction: 2003 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 x 320 mm Mould height min.: 200 mm Opening width: 550 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 mm Injection volume: 54 cm³ Shot weight: 49 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3.25 x 1.15 x 2,0 m Machine weight: 2250 kg Additional information & extras Core pull: 1 pcs

Ref. no.: 18404 Hersteller: ARBURG Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 5100 kg Additional information & extras Core pull: 1 pcs

Ref. no.: 18392 Hersteller: ARBURG Year of construction: 2003 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 X 520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x 728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg Additional information & extras Core pull: 2 pcs

Ref. no.: 18390 Hersteller: ARBURG Year of construction: 2007 Clamping unit Clamping force: 130 ton Opening stroke: 575 mm Distance between tie bars: 520 x520 mm Mould height min.: 250 mm Opening width: 825 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 50 mm Injection volume: 392 cm³ Shot weight: 359 g Injection pressure: 2000 bar Measurements and weight Dimensions: 5,2 X 1,6 X 2,2 m Machine weight: 6350 kg Additional information & extras Core pull: 1 pcs

Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.

Connected load: 37kW.

Connected load: 17.71kW.

Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.

Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.

Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Ejection stroke: 35mm, weight: 700kg.

Clamp force: 750kN, heating output: 11kW, weight: 3t.

Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.

Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.

Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

There are two identical injection moulding machines available.

Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.

Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.

Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.

There are eight ARBURG Allrounder 220M available.

Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.