used HELD for sale

Hand-held circular saw FESTOOL HK 55 EBQ, built in 2018, 1,200 W, S/N 40213842, Systainer

Hand-held circular saw FESTOOL HK 55 EBQ, year 2018, 1,200 W, S/N 40212371, Systainer

MIDLAND G7 Pro handheld radios, 2 pcs., on charging station

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

Industrial robot for the loading and unloading of pallets with filled and empty bottles in crates., Additional title: Pallet packing and unpacking, Capacity: 3000 Crates/h, Lifting load: 360 kg, Weight: 2400 kg, Formats: Euro-Pallet EUR1, Operation / Control: Hand-held programming device, Features: Clamp fixture; Maintenance-free AC servo-motors

Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again., Capacity: 350 hl/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump , Code: 11625

Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again., Additional title: Years of manufacture: 1993 - 2011, Capacity: 600 hl/h Beer with 6,0 g/l CO2, Hot water: 750 hl/h, Material: EPDM HT/NBR/1.4439; EPDM HT/1.4439, Features: Product plate heat exchanger; Water heater plate heat exchanger; Heat holder piping; Beer pump; Booster pump beer; Hot water pump; Measurement and control sensors

General SKUR0920 LocationBarneveld MakeRoemheld & Moelle GmbH (DE) Type4000 No.1110 Year of construction1985 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6000 Ltr. Motor10 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6000 Ltr (nett. 4000 Ltr) Vessel sizesdia.1800mm x2500mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections2x DN250, 5x DN150 OutletDN100 Half coil jacketed(195 ltr) Max. temperature-30/200 Degr.C With paddle stirrerEkato EM 100-D Motor10 kW, 380 Volt Speed mixing shaft7.5-75 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information Total height4,3 M Weight3500 Kg Floorspace2,3x2,3 MMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & oleoOther ...

The horizontal CNC machining center with a magazine for 60 tools, model CW-1000, is designed for complex boring and milling. It can handle parts (including fixtures) with maximum dimensions (length x width x height) 1200x1000x1000. Contents of delivery: - bed, column, frame - protection along the X, Y, Z axes - tool magazine manipulator type for 60 tools - rotary table - workpiece changer (2 pallets) - ball screws and rolling guides on the X, Y, Z axes - guides protection - spindle 4200 rpm, power 30 kW, SK50 - coolant supply through the spindle, pressure up to 50 bar, replaceable filters up to 25 microns - reducer - motors on the X, Y, Z, B axes, manufactured by Siemens (Germany) - main drive and feed drive: digital drives of the “SINAMICS S120” series - automatic lubrication system - hydraulic system - belt chip conveyor with coolant pump - lighting of the c ...

Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...

The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...

WAB Turbula shaker-mixer is used for the homogeneous mixing of powdery substances with differing specific weights and particle sizes. The product is mixed in its own closed container. It is also possible to mix wet and dry components or different wet components. The production process is hygienic and dust-free, making the TURBULA easy to clean. The exceptional efficiency of the TURBULA shaker-mixer comes from the use of rotation, translation, and inversion according to the Schatz geometric theory. The mixing container is set into three-dimensional movement that exposes the product to always changing, rhythmically pulsing motion. The results fulfill the highest requirements and are achieved in a minimum of time. The mixing basket can hold any form of container, from test tubes up to containers having volumes up to 2 liters. Containers are held tightly by twisted rubber rings. By adj ...

The KT-100S hand-held metal analyzer will easily identify the most difficult alloy grades in a few seconds. The KT-100S uses Laser Induced Breakdown Spectroscopy (LIBS), enabling permanent and accurate alloy identification for use in: Scrap sorting Quality assurance in metalworking Positive Materials Identification (PMI) in mission-critical operations such as aerospace and petrochemicals Advanced identification of light elements LIBS is more sensitive and better suited to detecting light elements such as aluminum (Al), magnesium (Mg), and beryllium (Be). However, reliable analysis of materials containing these elements by LIBS has been very limited and has typically been confined to the laboratory environment - until now. The KT-100S handheld metal analyzer represents the latest technological achievements in the miniaturization of lasers and spectrometers, which have quickly expande ...

Measurement of dynamic and kinematic viscosity R version - for typical viscosities PPR - a convenient quick spindle clamping system without screwing. Manufacturer: FUNGILAB Serial number: PRER402011 Year of production / purchase: 2014 Rotational viscometer Premium R PPR: Device with a set of measuring spindles made of ALSI316 steel, stand, spindle stand, USB cable. All in a protective case. As standard, temperature measurement using the attached Pt100 sensor. The set includes a set of 6 measuring spindles for the R version to work in the measuring range: 100...40,000,000 cP (mPas) Additionally, the HELDAL attachment for viscometers for pastes and creams Attachment for Brookfield viscometers for samples such as creams, pastes, gels, gelatin and other non-flowing samples of similar consistency. Supplied in a case with a set of 6 T-type measuring spindles and a drive motor. C ...

Four-wire rotary joint, housing part ROEMHELD, HILMA, STARK 9284036 NW5 Pressure range: 10 - 500 bar max. operating pressure: 500 bar Number of passes: 4 Bearings: plain bearing speed: max. 48 rpm hydraulic connection: G1/4 New ! Dimensions: 88 x 85 x 85 mm

Pressure switch, hydraulic-electrical signal converter ROEMHELD, HILMA, STARK 9730-501 3415395 Pressure range: 50 - 350 bar < -br />max. operating pressure: 600 bar 1 changeover switch switching capacity: 28 V DC, 3 A / 250 V AC 4 A mounting plate: 40 x 40 x 10 mm used, tested ! Dimensions: 87 x 40 x 57 mm

Gasket set, 3 pcs ROEMHELD, HILMA, STARK 131471 for screw-in cylinders 1471-001 10-piece other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

Gasket set, 4 pieces ROEMHELD, HILMA, STARK 132561 for rotary union 9284-036 10 pieces Other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

Block cylinder, hydraulic cylinder, double-acting ROEMHELD, HILMA, STARK 16DX100H 1541195S Piston diameter: Ø 16 mm Rod diameter: Ø 10 mm stroke: 100 mm p: max. 500 bar Female rod thread: M6, pitch: 1,1,00 0, Depth: 15 mm flange: 60 x 36 mm New ! dimensions ( block cylinder ): 150 x 60 x 36 mm Dimensions ( packaging ): 185 x 100 x 100 mm

Screw-in cylinder, with sealing kit, 3 pieces ROEMHELD, HILMA, STARK 1471-001 piston diameter: Ø 16 mm Rod diameter: Ø 10 mm stroke: 10 mm cylinder head reworked to hexagon with width across flats: 24 mm Seal kit: 0131471 Seal kit: New , 9 pieces used, tested ! Dimensions ( screw-in cylinder ): 60 x 28 x 28 mm Dimensions ( packaging ): 140 x 100 x 30 mm

Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...