Model
(Manufacturer: MICROSTEP)
Inv. Num. : 7569 Type: Aquacut 4001.20 Producer: Microstep Created: 2004 Parameters: Work table length: 4000 mm Work table width: 2000 mm High Pressure Pump: STREAMLINE SL-IV 50 hp
Inv. Num. : 6888 Type: MG 7501.20 Producer: MicroStep Created: 2008 Parameters: Work table length: 7500 mm Work table width: 2500 mm Sheet thickness: 150 mm With only one source.
Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses
CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of construction: 2003 CNC control: MSNC500P Working range: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 Filter system Kemper 8000
TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i
Plasma Cutting Machine MicroStep MG-PrB 6001.20 + S1200 – Retrofit with drilling rig and pipe cutting system Year of construction: 2010 – Retrofit 2021 Working area: 6,000 x 3,200 mm, including 1,200 mm pipe shaft 1x pipe cutting device: 100 – 700 mm 1x Plasma Rotator Plasma Power Source: Hypertherm HPR 260XD 1x fully automatic drilling spindle: up to 30 mm drilling and up to M20 threading (8-fold tool changer) Filter system: Donaldson DFPRO 8
Ref. No. 00774 Description of the system: Used plasma cutting machine Manufacturer: Microstep Model SPL-PA 9001.25 Year of construction 2010 Machining area 9000mm x 2500mm Plasma Source Power 260A Condition of the plant under power Submission April May 2023
CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Type: MG PPA 8001 20+S1200 Year of construction: 2005 CNC control 1 x Plasma Kjellberg FineFocus 800 TWIN with rotator 1 x Plasma Kjellberg HiFocus 160i 1 x oxy-fuel torch 1 x Pipe Cutting Device RSV without filter system Availability: End of May 2024
Ref. No. 00787 Description Plasma Cutting System with Tube Axis Manufacturer: Microstep Type HS-P 4001.20+S500 Year of construction 2005 Operating hours Only run in one shift on 3-4 days Machining area 4000mm x 2000mm Cutting pipes up to diameter 300mm and 4000mm length Plasma cutting up to 30mm thickness with 160A, tube and flat SP: 230V 50Hz Power: 2kW Condition Good condition Submission mid-April 2023
BRAND: MICROSTEP YEAR: 2012 MODEL: MICROMILL 2501.15F APPLICATION TYPE: MILLING LOCATION: CZECH REPUBLIC MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 800 KG CONTROL UNIT BRAND: MICROSTEP Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NOMINAL CURRENT 70A
BRAND: MICROSTEP YEAR: 2015 MODEL: EASY CUT 3001.20P APPLICATION TYPE: PLASMA CUTTING LOCATION: CZECH REPUBLIC MACHINE TYPE: PLASMA CUTTING MACHINE AVAILABILITY: 01 12 2023 Technical Information CONTROL UNIT MODEL: IMSNC WINDOWS 7 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 2000 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. RAPID FEEDRATE X AXIS 25 M/MIN - COMPRESSOR KAESER SX4 (2015) - LASER POINTER - PLASMA SOURCE HYPERTHERM HPR 260XD - FILTRATION UNIT TEKA FC 4H, 5. 5 KW QUALITATIVE MACHINE BENEFITS: - LOW HOURS
BRAND: MICROSTEP YEAR: 2017 MODEL: MSF 3001.20L APPLICATION TYPE: LASER CUTTING LOCATION: CZECH REPUBLIC MACHINE TYPE: FIBER LASER CUTTING MACHINE AVAILABILITY: 01 12 2023 Technical Information CONTROL UNIT MODEL: IMSNC MAIN DRIVE LASERPOWER: 3 KW MOVEMENT X-AXIS MOVEMENT: 3200 MM Y-AXIS MOVEMENT: 2000 MM Z-AXIS MOVEMENT: 140 MM MAX MATERIAL THICKNESS STEEL: 18 MM STAINLESS STEEL: 12 MM Additional Equipment - NEW CUTTING HEAD, STILL PACKED, BOUGHT AS A BACK-UP (WORTH 24K €) Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TABLE CHANGE - COMPRESSOR KAESER SM10 (2021) QUALITATIVE MACHINE BENEFITS: - LOW HOURS
x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...
working length: 3000 mm working width: 1500 mm plate thickness: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The automated plate processing line DS was designed for high-efficiency drilling and plasma cutting with the possibilities of automatic plate feeding and automatic part sorting on output. The machine is dedicated to heavy-duty structural steel applications such as production of high-precision fittings, gussets and end plates. Type: DS 6001.20P Plasma cutting: - 3D plasma bevelhead for cutting vertically and at an angle up to +-50° (auto calibration) - Hypertherm XPR 300 (piercing 45 mm / 6 mm straight cuts at 170 amp up to 200 mm/min) - max sheet size: 6000 x 2000 mm - material thickness: 3 gt; 30 mm - plasma marking - laser light Drilling: - MG-40 P26 drilling device ISO 40 - drilling range: dia 4 gt; 40 mm - thread cutting: M4 gt; M33 - max thickness: 100 mm - stroke: 400 mm - 26 kW on spindle - max 1829 rpm - automatic toolchanger; 8 toolpositions - external amp; internal tool coo ...
Type: MCCompact 4001.20 P Z-axis: 150 mm cap mild steel: 38 mm cap stainless steel: 25 mm cap alu: 25 mm Longitudinal travel X-axis: 4000 mm Cross travel Y-axis: 2000 mm Table dimensions: 4000 x 2000 mm Plasmasource: Hypertherm HPR130xd Gas cutter: 1x Read-out / Control: iMSNC 500 Weight: 4 ton
It is equipped with a MicroStep control unit. MicroMill machines are designed for 3D CNC milling of mild metals, plastics and wood by means of high-revolution spindles. Machine weight: 800 kg CNC: MicroStep
WaterJet MicroStep Aqua Cut 3001.20 was built in 2005. The waterjet cutting machine allows you to cut sheet metal with a maximum thickness of 120 mm on a table size (L x W) 3300 x 2200 mm. The machine portal is equipped with two heads for water cutting, one of which is rotating. The waterjet is controlled by the MSNC 500 CNC controller. The MICROSTEP Aqua Cut 3001.20 WWr + 4001.20P water cutter is offered with extensive equipment, including: Streamline SL-V 50S Plus oil cooler, ATLAS COPCO FX1 dryer and KKT KRAUS OLB7 cooling unit. The plasma source and the additional head also enable plasma cutting after installing an additional table.
This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 25000 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.
This MicroStep MSF 3001.20L Fiber laser cutting machine was made in the year 2017 and has 15735 production hours, of which 4907 are cutting hours. It is equipped with an iMSNC control unit. The machine has a laser power of 3 kW.
This MICROSTEP MICROMILL 2501.15F + VAKUUM Milling machine was manufactured in the year 2012 in Slovakia. It is equipped with a MicroStep control unit. MicroMill machines are designed for 3D CNC milling of mild metals, plastics and wood by means of high-revolution spindles.
The machine is in good technical condition, can be tested under power. Manufacturer: MICROSTEP
The machine is in good technical condition, can be tested under power. Parameters: Working table length: 7500 mm. Work table width: 2500 mm Sheet thickness: 150 mm Only with one source. Including extraction and all accessories. Table dimensions: 7500X2500 mm.