used PERSKE for sale

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

Fraesmotoren PERSKE suitable for dimter HK 200 + HK400 + HK800 Milling motor, motor for tine cutters 400 Volt 50 Hz 2880 rpm State ready for use

There are six frequency converters available, type: DAO 14-2, DAO 11-1, 12,5 DWO 11-10, 30 DWO 14-2, 60 DWO 16-2, DAO 16-2.

Several milling motors Make: Perske - in different versions available from stock (0,2 till 8 kW) Price on request (depending on version) Please let us know which specification you are looking for: - power - shaft-type - torque - type - voltage

Manufacturer: Homag , for left machine side: yes, for right machine side: yes, Number of motors: 2, Motor : Perske, kW-Leistung : 1-1,5, Volt/Hz : 220-380/50-100, Drehzahlen U/min : 2670/5710, Siko Anzeige : yes, Horizontal Rollentastung : no, Pneumatically controlled: no, Shaft dimensions L x D mm: 30, Slewable vertically: yes, Motor 2: Perske, kW-output 2: 1,5, Volt/Hz 2: 220-380/50-100, Speed rpm 2: 2670/5710, Silo indication 2: yes,

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Manufacturer: Perske Fräsmotor, Type: KIS 51.14.-20, Model: 2,2 kw <CRLF>, Serial number: 794997, Systemconfiguration: U/min 5650, Serial number: 35 mm Fräspindel/abgesetzt auf 30 mm, Year: siehe Bilder, Year :siehe Bilder

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw<CRLF>, Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Perske Fräsmotore verstärkte Ausführung, Year: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Series: yes, Motor mit Getriebe: yes, Installation height: 133 Volt, Length mm: 200 Hz, Anschlussspindel mm: U/min 11530, Year :VS.42.20-2

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Perske Fräsmotor mit Nutenstein <CRLF>Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Manufacturer: Perske Bohrmotor mit Getriebe, Systemconfiguration: Raster 16mm, mH/Hz: 200 Hz, Output PpK= kW: 1,0 Kw, FREE TEXT: ca.60 mm hub,

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Perske Fräsmotor, Type: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, Iso/kl: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: yes, machine ready for demonstration: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.9 kw type DA12/2 -Output: 100 V 150 Hz type 10DW12/4 -Power: 10 KVA -for edgebander, edgebander -Dimensions: 800/400/H320 mm -Weight: 180 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10 / 8/2 -Power: 0.37 / 1.5 kW -Speed: 700/2900 rpm -V-belt pulley: Berges, symmetrical adjusting pulley see photo -Protection class: IP 54 -Construction: B3 -Dimensions: 400/250 / H200 mm -Weight: 40 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power at 50 Hz: 4.4 kW, 2890 rpm -Power at 100 Hz: 6.6 kW, 5860 rpm -Socket: O 35 mm -Tool: Ø 250 mm -Number: 3x motors available -Price: per piece (other types of motors also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz -Power: 7.5 KVA -for: edgebander edgebander -Weight: 105 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power: 6 KVA -for: edgebander edgebander -Weight: 115 kg

Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Perske, frequency converter from edge banding machine BRANDT KM 36 -Type: 5 DW 58-6 / DA 58-2 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power: 5 KVA -Protection class: IP54 -Dimensions: 610/300 / H235 mm -Weight: 83 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Drum motor belt sander belt sander -Spare part for a grinding machine -Drum: Ø 150 mm -Drum length: 170 mm -Speed: 2900 rpm -Power: 1.75 kW -Shaft mount: Ø mm -Number: 3x motors available -Price: per piece -Also other sizes available in stock -Weight: 19.5 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Drum motor, belt grinder, belt sander -Spare part for: HUSBAND grinding machines -Drum: Ø 350 mm -Drum length: 1000 mm -Speed: 1450 rpm -Power: 18 kW -Shaft mount: Ø 80 mm -Also available in other sizes -Weight: 450 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: collet -Weight: 10 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft holder: Ø 16 mm L 10 mm -Number: 4x engines available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW 17570 rpm at 300 Hz -Voltage: 165V -Adaptation: shaft collet -Quantity: 8 motors available -Price per piece -Dimensions: 350/75 / H160 mm -Weight: 12 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Hollow shaft: Ø 40 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 420/290/H225 mm -Weight: 50 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2820 rpm at 50 Hz -Voltage: 400 volts -Shaft holder: Ø 30 mm -Tool -Dimensions: 430/230/H145 mm -Weight: 33 kg

Drum motor, belt grinder, belt sander -Spare part for: Ehemann grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -Also available in other sizes -Number: several engines available -Weight: 70 kg