Used / cleaned CNC lathe with different clamping axes. Tools on the moulds are not included. Optical tool measurement. Optional instruction manual available.
CNC lathe TRAUB TNS 30 D With TX8D controller Year of construction: 1987 Spindle bore: 30 mm Circulation O over face slide: 200 mm X axis : 140 mm Z axis : 220 mm Speed range: Max. 8,000 rpm With the following accessories: Full protection cabin with interior lighting 2 x 12-speed turret VDI 30 ( 6 driven stations ) 14 driven tools VDI 30 8 tool holders VDI 30 1 pc additional control for training Coolant system 1 collet chuck hydraulic with foot switch Conveyor Operating instructions THE MACHINE IS IN TOP CONDITION THE MACHINE COMES FROM A VOCATIONAL SCHOOL
Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price
Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price
CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg
Tool turret with 12 tool positions, with driven tools, bar machining up to 65 mm diameter, chuck processing up to: 250 mm, max. 6000 rpm, control type: TX8F, optical tool measurement, with bar loading magazine, Fabr. LNS, type: QUICK-LOAD SERVO, with material feeder, filter system, Fabr. RUEZ & Chip Conveyors
Control TX8i Max. rod diameter 65 mm Turning length 450 mm Spindle speeds 5,600 min-1 Main and counter spindle 2 x 10-speed turret with attached revolver Competition. 2 x C-axis Workpiece discharge device with conveyor belt Conveyor Coolant cleaning system HAINBUCH Tension Top LNS Short Bar Loading Magazine Quick Load Servo 3 Various tool holders (fixed and driven)
Machine Details Stock number 1105-03756 Machine type CNC turning and milling center Brand TRAUB Type TNA 300 Year of construction 1996 Control type CNC Control Traub TX 8 H Storage location warehouse Country of origin Germany Delivery time by arrangement Freight base EXW Technical details Turning length 450 mm Control Traub TX 8F Turning diameter above the paddling carriage 275 mm Turning diameter over bed 400 mm Speed range 4000 rpm Number of tools 12 pcs. Sledge path plan 210 mm Sledge path lengthwise 450 mm Quill diameter 75 mm Quill stroke 125 mm Total power requirement 22 kW Machine weight ca. 3.2 t Space requirement approx. 3 x 2.00 x 2.10 m Information 3 AXIS MACHINE WITH LIVE TOOLS incl. chip conveyor 12-cavity tool turret SAUTER with 12-cavity tool turret VDI 30 MIT DRIVEN TOOL HOLDERS AND C AXIS Towing tailstock with quill Three-jaw power chuc ...
Immediately available from location : CNC lathe TRAUB Type TND 300 Built in 1991 CNC control TX 8 F Spindle bore 42 mm Circulation over bed 400 mm Circulation via flat carriage 170 Revolver 12 speed 6 powered tools Tailstock Turning length 500 mm Lining 160 mm Drive power 18 kw Spindle speeds 56 – 5600 rpm Drive driven tools 3 / 5 kw Speed driven tools 6000 rpm Conveyor Coolant system Weight 3.8 tons Dimensions: 2498/1990/2005 mm Prior sale and errors excepted. The machine is sold as it stands in the hall. The buyer can view the machine under power with connection options. Currently, it is not energized.
High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...
General: Year of construction 2011 Control Traub TX 8i-s Spindle: Spindle speed max. 10,000 rpm Power 3.7 kW Rod passage 20 mm Revolver: Tool stations top 8-fold Rear apparatus 7-fold Dimensions and weight: Dimensions: 3,060 x 1,460 x 2,250 mm Weight approx. 4,000 kg Other equipment and accessories: Coolant supply 3/8 bar (tank 500 l) Workpiece discharge into parts hopper Conveyor Attachments Bar Loading Magazine High Accuracy Package Turret Smoke and mist separator company Büchel Automatic CO2 extinguishing device Bar feeder IEMCA Elite 220/32
Traub TNS 65 D / 5-axis CNC lathe / control TX 8 D FOR COMPLETE TECHNICAL DATA, SEE "Data Sheets" E2j9tbm -Control - Type TX 8 D -C - Axis -Rod passage approx. 65mm -Hydraulic bar feed
Curve Controlled Turret Bar Automatic Turning Machine max bar passage 26 mm max. speed 4750 rpm 6-fold star turret max. stroke of the turret slide 80 mm Coolant device Gearbox 2 Double Vertical Support 2 side supports with steel brackets - Reverse machining driven - Oil protection cover - Bar weight feed
- Spindle passage 42 mm - max. turning length 100 mm - 2 page supports - 2 vertical supports - Weight feed Dimensions LxWxH: - Machine 2200 x 1200 x 1600 mm, weight 1800 kg - Tube 5200 x 600 x 1200 mm, weight 400 kg
- TRAUB control TX 8F - Spindle passage 42 mm - Working spindle speed: 40 - 4,000 rpm - 4 piercing slides: stroke 60 mm - 8-fold revolver - High-pressure pump 25 bar - Backside machining (2 spindles) - Bar feeder (3 m) -Conveyor
BRAND: TRAUB YEAR: 1983 MODEL: A25 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2000 MM MEASUREMENTS DEPTH: 6000 MM MEASUREMENTS HEIGHT: 2000 MM MACHINE WEIGHT: 1000 KG MAIN DRIVE NUMBER OF SPINDLES: 1 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TURNING DIAMETER: 25 MM - TURNING LENGTH: 70 MM - CROSS SUPPORT: 2 PIECES - VERTICAL SUPPORT: 2 PIECES - DRILLING TAILSTOCK: YES - CHIP CONVEYOR: YES
Traub TNA 400 Y, Built in 1997, Control TX 8 H, Turning length 750 mm, Swivel Ø 340 mm, Revolver 12-speed, Conveyor Tailstock C axis, Addressed. Tools Y axis +/- 50 mm, good condition, approx. 20,000 spindle hours,
Traub TNA 300 Y, Year of construction 1998, Control TX8H, X/Z/Y travel 210/450/ +/- 35 mm, Y axis, C axis, Angetr. Tools 1 turret mount VDI 30, Hollow clamping cylinder 65 mm, Hainbuch BZI 65, LNS Hydrobar, Tailstock Conveyor approx. 20,000 spindle hours,
Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg
Manufacturer Traub Type TNE 300 Year of construction 1997 Control Traub System TPC Travel X 210 mm Z 450 mm Workspace Spindle passage 65 mm Turning diameter Max. 275 mm Turning length Max. 450 mm Circulation diameter over plane slide 372 mm Circulation diameter over bed 560 mm Main drive Power 11 kW Spindle speed Max. 4,000 rpm Torque 183 Nm Feed drive Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 18 m/min Tailstock Pinole diameter 70 mm Pinole stroke 70 mm Dimensions and weight Dimensions 3.600 mm x 1.600 mm x 1.800 mm Weight approx. 3,000 kg
General: Year of construction 2006 Control Traub TX8i Travel X 50 mm Z 100 mm Working spindle max. 6,300 rpm Rod passage 36 mm Torque 21/32 Nm Other equipment and accessories: High-pressure system with belt filter 30 bar Conveyor Bar feeder FMB turbo 3-36-3200-C Preparation of the extraction device
BRAND: TRAUB YEAR: 2005 MODEL: TNL 26 K APPLICATION TYPE: TURNING LOCATION: SLOVAKIA MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MACHINING WITH GEOMETRICALLY DEFINED CUT
Traub TNL 12 - 7, Built in 2006, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
Traub TND 300, Built in 2005, Control TX 8 H , Travel X/Z210/450 mm, Spindle passage 65 mm, max. swivel Ø 277 mm, max. turning length 450 mm, Main drive 11 KW, Spindle speed up to 4,000 rpm, Revolver 8-speed - Makes Ø 30 mm, Tailstock Quill stroke 70 mm, Conveyor Suction Bandpass filter High-pressure cooling,
bar length: 63 mm bar length: 4200 mm weight - pallet system: 2380 kg dimensions of the machine ca.: m weight of the machine ca.: t air volumen: m³/h Heat output capacity: KW bar diameter min. 18mm / max. 63mm bar lenght min. 1000mm / max. 4200mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 36 mm turning length: 100 mm control: Traub TX 8i turning speeds: 6300 U/min c-axis: 0,001 turret (x-stations): 12 angetrieben turning speeds: 6000 U/min x-axis: 370 mm z-axis: 250 mm y-axis: +/- 20 mm gripping station: 36 mm turning speeds: 6300 U/min c-axis: 0,001 0 collet unit: 2x Hainbuch HSP/GSP SK 6970 ZW/G load magazine: FMB turbo 5-42 chip conveyor: ja / yes kW total power requirement: 33 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 1,22 x 1,7 + FMB m parts conveyor: ja / yes front attachment: 5(7) rear station: 5 (4 angetrieben) CNC automatic lathe Traub TNK 36, year 2005, with bar feeder FMB turbo 5-42 This turning-milling centre is in a very good condition and equipped with 2x Y- axes and driven tools on 3 tool carriers. Tool carrier 1 = turret 12-fold driven, Y-axis +/-20mm Tool carrier 2 = front attachment 5 stations (4 driven) Too ...
turning diameter over bed: 20 mm spindle passage: 24 mm turning length: 180 mm turning diameter: 20 mm control: Traub System TX 8i-s turning speeds: 10000 U/min c-axis: 0,001° c-axis: 0,001 ° gripping station: 20 mm speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 2 x 8 high-pressure pump: 130 bar total power requirement: 2,2/3,7 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2,5 x 1,5 x 2,25 m driven tools: 6+4+4 Rev+S7+S8 fire distinguisher: parts conveyor: CNC long lathe Traub TNL 18, year of construction 2011 and 2012, without loading magazine can be used as long lathe and short lathe 2 pieces immediately available, from medical technology super condition, very well equipped Sale due to type adjustment. If you buy two identical machines you get a package price 7+2x C-axes, main and counter spindle, 2 turrets UPPER TURRET - positions 8 - number o ...
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...
Technical data Max. work piece diameter: 15 mm Turning length: 70 mm Spindle hole: 15 mm Max. treading diameter: 8 M (Metric) Production capacity: 28 - 2100 pce/h Spindle speeds: Number of spindle speeds: 12 from: 900 rpm up to: 6500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Pick-up attachment Gripper device Vertical support Bar loader number of bars: TRAUB Type: B3000 Length of bars max.: 3200 mm Slotting attachment Drilling tailstock Workpiece counter Protective cover
Turning diameter: 175 mm Turning length: 650 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 12 CNC Brand: Traub CNC Model: TX8i-S X-Axis: 175mm Y-Axis: 40mm Z-Axis: 650mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 24kW Subspindle speeds:7000Rpm Subspindle bore: 42mm Subspindle power:28kW Length: 6.500 mm Width: 2.400 mm Height: 2.400 mm Weight: 10.000 kg Upper left turret: Positions 10 Driven station 10 X/Z Stroke 175 / 650 Y Stroke 40 Vdi 30 Speeds 6000 Rpm Lower right turret Positions 10 Driven station 10 X/Z S ...
Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024.
Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
This TRAUB TNE300 Lathe was manufactured in 1999 in Germany. It has a turning length of 450 mm and a turning à of 275 mm. The turning speed is 4,000 rpm. This turning machine is operated with a TRAUB System TX 8H control. It has 2 axes (X-axis 210 mm, Z-axis 450 mm). Contact us anytime for further questions!
This Traub TNC 42/65 DGY Lathe was manufactured in the year 1995 and has 13000 production hours. It is equipped with a TRAUB TX8F control unit. The machine has a spindle speed of 4000 rpm.
This Traub TNS 26 DGY Lathe was manufactured in the year 1991. It is equipped with a Traub TX8F control unit. The machine has a spindle speed of 7000 rpm.
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Description: TRAUB TNL 12 K Year of construction 2003 CNC control MITSUBISHI TX8i Technical data - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. rod diameter: 12.7 [mm] - Max. machinable length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum resolution C-axis: 0.001 [degrees] COUNTER SPINDLE - Max. rod diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET HEAD - Number of positions: 6 - Number of motorized positions: 6 - X/Z stroke: 35/50 [mm] - Powered tools speed: 8,000 [rpm] FRONT APPARATUS - Number of positions: 4 COUNTEREDIT - Number of positions: 4 CONNECTED TO THE ELECTRICITY GRID - Supply voltage: 400 [V] - Total drive: 18 [kW] Accesories - Parts removal - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar magazine: FMB Minimag 3200 C - Number of driven tool holders: ...
Description: CNC control TRAUB TX 8F Maximum turning length 450 mm Maximum machining diameter 65 mm Maximum spindle speed 5600 rpm Spindle motor 18.5 KW Rod diameter 65 mm Number of spindles 2 Number of tool stations on the turret 14x VDI30 Maximum speed of the turning tools 8000 rpm Drive of the turning tools 1.5 KW at 100% or 4 KW at 15% weight approx.: 4,800 kg, Approx. Onsite Dimension. (l x w x h): 3,450 x 2,400 x 2,100 mm
Description: Contents consisting of cutting dies, taps, reamers, twist drills, turning tools Attention: the clamping brackets on the workbench are not included in the scope of delivery Incl. vice Jaw width: 160 mm weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,200 mm
Description: Contents consisting of milling cutters, reamers, calipers, lot hand tools weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 750 x 900 mm
Description: Contents consisting of various clamping elements, screws and a small batch of milling cutters weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 750 x 850 mm
Description: max bar length 3000 mm, fi 42 Approx. Onsite Dimension. (l x w x h): 5,200 x 1,000 x 1,400 mm, weight approx.: 2,000 kg
Description: Contents consisting of measuring stands, a three-jaw chuck (diameter: 160 mm), indexable inserts, milling cutters, collets, a tool setting device from the manufacturer TOOL BOY as well as twist drills, clamping elements, files, turning tools and approx. 15 SK 40 tool holders Please note: the SK 40 tool holders with the fitted milling cutters are not included in the scope of delivery weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 700 x 1,200 mm
Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available -Price: per piece -Dimensions: 325/130/H135 mm -Weight: 7.3 kg
Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition