Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg
Shaped part edge banding machine, edge banding machine, edge banding machine -Workpiece thickness: 10- 85 mm -Fan heater: 6 kW pre-coated edges -Cut knife -edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135kg
Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Unit: from edge banding machine BRANDT KM 35 -Engine. Groschopp 0.25 kW / 2800 rpm -Individual components: see photos -Dimension total. 590/360 / H330 mm -Total weight: 30 kg
Banda lijadora de cantos KS10: Sí; Unidad de fresado de bisel y radio: Sí; Unidad de muela abrasiva de perfil: Sí; Longitud de la máquina: Ancho de la máquina: Peso: 800 kg;
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control
Longitud mín./máx. de la pieza 1800 / 4200 mm. Altura máxima del perfil 200 mm. Espesor mínimo de la pieza 16 mm Altura de trabajo 950 mm. Potencia instalada 12 kW
Espesor de la pieza de trabajo (radio) aprox. 16 - 55 mm Espesor de la pieza de trabajo (chaflán) aprox. 12 -55 mm Anchura de la pieza de trabajo mín. aprox. 30 mm Radio interior mín. aprox. 35 mm (dependiendo del radio del borde y del número de la pieza) Espesor del borde máx. aprox. 3 mm Motor de fresado 2 x 0,4 kW, 10950 o/min. Extracción de polvo 1 x diam. 80 mm Altura de trabajo 900 mm Radio 3 mm Utillaje
Recortadora de contornos estáticos para redondear bordes a paneles conformados o postformados. La máquina tiene un rodillo de trazado y un motor de recorte y realiza trabajos de copia simétricos y asimétricos (mediante controles plc). Para el acabado se ha construido adicionalmente un cepillo de pulido. Espesor máximo de la pieza: 55 mm. Anchura máxima de la pieza: 80 mm. Profundidad máxima del perfil 80 mm. Espesor máximo de los bordes: 3 mm. Motor: 0,5 kW.
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Longitud máx. de la pieza de trabajo 4500 mm. Altura máxima del perfil 200 mm. Espesor mínimo de la pieza 16 mm Altura de trabajo 950 mm. Potencia instalada 12 kW
Chapadora de cantos con funcionamiento manual y aplicación de cola termofusible para paneles perfilados Espesor del panel: 10 a 40 mm Espesor del borde: 0,5 - 1 mm Velocidad de avance: aprox. 4 m/min Solo bordes de bobina