Modelo
(Fabricante: OKUMA)
Okuma MB 56 VA Vertical Machining Center Control Unit : OSP U100M X/Y/Z : 1050 mm / 560 mm / 460 mm Machine is in good working condition
Type: LFS 12 - 2SP Parameters: Manufacturer: Okuma Year of production / SO / GO: 2001 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Lathe with gantry loader. Technical parameters: 2 spindles - 8 ”chucks (210 mm), 2 V12 turrets, 2 workpiece loaders, catch stations, 2 Pneumotec workpiece magazines 18 positions, chip ejector, control system OSP-U 100 L. technical datas max turning length [mm] 70 max swing over saddle [mm] 200 max speed [rpm] 6000 rapid feed [m / min] 24/24 (X / Z) max main power [kW] 11 number of tools [piece] 12 + 12 tool clamping system direct recording. length [mm] 2,500 large [mm] 2.084 High [mm] 3.080 weight [kg] 5,000.
Steering Unit: OSP-P200L Maximum Capacitance Voltage: 410 Standard Machinable Diameter Capacity: 410 Maximum Machinable Length 1 Capacity: 580 Bar Capacity Bar Capacity: 75 Main Spindle Self-Centering Dimensions: SPINDLE HOLDER Main Spindle Spindle Speed: 4000 Main Spindle Nose: ASA 6 Main Spindle Spindle Bore: 75 Turret Type Turret: 12 UT VDI Number Of Turret Tools: 12 Spindle Spindle Speed Motorized Tools: 5000
Okuma TS-4000YS with C and Y Axis Running time : 7490 Cutting time : 4509 Double chuck C and Y axis Machine is from 2015 but installed in 2016â Machine is in excellent condition Maximum turning length : 750 mm Maximum turning diameter : 370mm 12+12 turret Fanuc control unit Extras: âBarload bar feeder(52mm) 4 unit live tool Cooling water pump Air gun system Part catch system Measuring tool for chuck TiwaP-I
Steering Unit: OSP-E100L Maximum Capacitance Voltage: 410 Standard Machinable Diameter Capacity: 410 Maximum Machinable Length 1 Capacity: 580 Bar Capacity Bar Capacity: 75 Main Spindle Self-Centering Dimensions: 250 Main Spindle Speed: 4000 Main Spindle Nose: ASA 6 Main Spindle Spindle Bore: 75 Turret Type Turret: 12 UT VDI Number Of Turret Tools: 12 Spindle Spindle Speed Motorized Tools: 5000
Type: LFS 10 - 2SP Manufacturer: Okuma Year of production: 1999 Location: Czech Republic Description: The machine is in good technical condition. Control system: OSP 7000 L Tris conveyor: yes Operating hours: 34.288 in the CNC process / as of 16/05/2019 Accessories: spare pallets, tool holders spare pneumatic 3-jaw gripping head for robot. AJ Documentation. Possibility of tour in agreement after agreement.
Okuma MA400-HA Horizontal Machining Center X : 560 mm Y : 560 mm Z : 600 mm Table size: 400x400 mm High pressure pump
Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done
Okuma MA50HB HORIZONTAL. 10,000 revolutions. 60 tools. Renishaw and presetting. Perfect conditions
Governing Unit: ... Axis X Strokes: 1000 Y Axis Runs: 800 Z Axis Strokes: 810 Board Length: 630 Width of Board Table: 630 Max Workpiece Dimensions Length X Width X Height Table: D.1050 X H.1000 Spindle Table Surface: Tapped Holes Max Workpiece Spindle Weight: 1500 Spindle Spindle: 6000 Spindle Spindle taper: ISO 50 Torque Cont 10 Min Spindle: Nm X-Axis Rapid Displacement Rapid Displacement: 60000 Y-Axis Rapid Displacement Rapid Displacement: 60000 Z Axis Rapid Displacement Rapid Displacement: 60000 Number Of Atc Warehouse Tools: 160 Max Tool Diameter Atc Warehouse: 250 Max Tool Length From the Atc Warehouse Reference Line: 630 Atc Magazine Tool Selection Method: Fixed Max Tool Weight Atc Warehouse: 30 Kg Atc Warehouse Tool Change Time: 5 SEC. Refrigerant Pressure: 30 BAR Refrigerant Tank Refrigerant: 500L Height Machine Dimensions: 3300 Width Machine Dimensions: ...
The machine is currently in production! Driven tool C-axis machine. It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
CNC: Okuma CNC version: MX 40 HA X-axis travel: 560 mm Y-axis travel: 610 mm Z axis travel: 560 mm Pallet number: 2 Board/Pallet Size: 400mm x 400mm Table capacity: 400 kg Continuous pallet (table) rotation control: Yes Degrees of rotation for indexed pallet (table): 360° Number of controlled axes: 4 Number of tools: 40 Spindle taper: 40 BT/SK/ISO/HSK RPM: 7000 rpm Refrigeration through the chuck: Yes Power: 20 kW Chip conveyor: Yes
The machine is in good technical condition. Axis X= 700mm Axis Y= 800mm Z axis = 850mm Table clamping area: 500 x 200 Control system: OSP U100M Number of controlled axes: 4 Spindle speed: 50-5000/min Central cooling: yes Spindle clamping taper: BT 50 Toolbox: yes Number of positions in the tool tray: 6 Number of exchangeable pallets: 2
The Okuma ES-L8 II M lathe is the intermediate model of the Okuma-Eco Series family. This model has a version with a 12-position motorized turret. The maximum cutting diameter it reaches is 210 mm and the maximum cutting length is 500 mm. The axle travel is 155 mm for the X and 520 for the Z. The turret has 12 positions. The speed of the left spindle head is 4,200 rpm and the rapid positioning speed is 20 m/min for the X axis and 25 m/min for the Y. It is equipped with the OSP-U10L control.
OSP-P200LA-R Maximum voltage (capacity) 450 Workable diameter / standard workable diameter (capacity) 200 Maximum workable length1 (capacity) ... Bar capacitybar capacity (capacity) 51 Self-centering dimensions (main spindle) 200 Spindle speed (main spindle) 4000 Spindle nose (main spindle) ASA 6 Spindle bore (main spindle) 65 Turret type (turret) 12 UT VDI Number of tools (turret) 12 Spindle speed (driven tool spindle) 5000
Used Okuma MA50H / 1000 Machining center - palletized Year 2001 Cnc Okuma Ops U 100 M X 700, Y 800, Z 700 Table 500 x 500
The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
Maximum diameter is 340mm, copper must take chips and coolant with it, lot is dismantled
Buyer must take liquids and chips with him, machine is dismantled
Tooling package, Chip conveyor, High pressure coolant Machine already ready for transport, machine can be viewed on viewing day for correct assessment. Pick up the machine by appointment
turning diameter:340 mm turning length:480 mm weight of the machine ca.:5,2 t transport dimensions LxWxH:2200 x 1720 x 2200 m dist. between centers:500 mm spindle diameter:100 mm spindle bore:62 mm no. of tools in turret 1:12 c-axis:360 grad 4-axis Okuma LB 300 built in 2004 with a large turret type V12 for 12 x L or M tools and a hydraulic tailstock.
turning diameter:550 mm turning length:1440 mm weight of the machine ca.:12,5 t b-axis:0.001 ° tool magazin::44 places spindle turning speed range:6.000 U/min tool taper:HSK63 transport dimensions LxWxH:5,10 x 2,90 x 2,80 m
Description: Y axis for OKUMA MC-4VA Vertical Machining Centre Incl. 2 bearings Unused in packaging Approx. Onsite Dimension. (l x w x h): 2,000 x 300 x 300 mm, weight approx.: 50 kg
Description: YOM: presumable 1989 (without warranty) , travels: , X: 640 mm , Y: 410 mm , Z: 450 mm , distance between spindle centres and table surface: 200 – 650 mm , distance between ,spindle centre line and column front side: 460 mm , effective table size: 1000 x 410 mm , loading capacity: 500 kg , distance between ,table surface and floor: 750 mm , spindle taper bore: NT.40 , diameter (front bearing): 70 mm , spindle speed: 4000 rpm: , rapid traverse of X- and Y-axis: 13000 mm/min , Z-axis: 10000 mm/min , cutting feed of X-, Y- and Z-axis: 1 – 4000 mm/min , with automatic tool changer magazine capacity: 20 tools , tool shaft: BT 40 , Max. tool diameter: 102 mm , Max. tool diameter without ,neighbour tools: 152 mm , Max. tool length: 300 mm , Max. tool weight: 8 ...
Description: serial number: 01340 distance between the centers: 1.000 mm max. sanding diameter: 300 mm grinding wheel diameter: 610 mm X-travel: 370 mm Z-travel: 1.200 mm max. swing over table: ,330 mm max. grinding dia: 300 mm max. grinding wheel width: 135 mm max. workpiece mass: 300 kg Accessories Filter Documentation: Documentation Transformer grinding diameter: max. 300 mm, control: OKUMA OSP700G, weight approx.: 8.500 kg, Approx. Onsite Dimension. (l x w x h): 5.000 x 2.900 x 2.200 mm
Description: S/N: 0156 Control:  ,OKUMA ,OSP-U100L Capacity: Swing over cross-slide mm (in.) ∅320 (12.60) , Max. turning dia. mm (in.) ∅280 (11.02) , Max. turning length mm (in.) 200 (7.87) , Recommended work weight kg (lb) 20 (44) ,  , Travels: X-axis mm (in.) 210 (8.27) ( for machining ) ,+ 845 (33.27) (for loading/unloading parts) , Z-axis mm (in.) 360 (330 up to #0074) , Spindle: Spindle speed min-1 40 to 4,000, , Speed range Auto 2 ranges , Spindle nose JIS A2-6 , Spindle bore mm (in.) ∅62 (2.44) , Spindle Front bearing ID mm (in.) ∅100 (3.94) , Turret: Type V12 VDI NC non-lift , No. of tools 12 , OD tool shank mm (in.) 25 × 25 (0.98 × 0.98) (VDI toolholder shank dia.: 40 (1.57)) , ID tool shank dia. mm (in.) ∅40 (1.57) (VDI toolholder shank dia.: ∅40 (1.57)) Turret&nb ...
Description: S/N: 101671 Control:  ,OKUMA ,OSP-U100L Capacity: Swing over cross-slide mm (in.) ∅320 (12.60) Max. turning dia. mm (in.) ∅280 (11.02) Max. turning length mm (in.) 200 (7.87) Recommended work weight kg (lb) 20 (44) Travels: X-axis mm (in.) 210 (8.27) ( for machining ) ,+ 845 (33.27) (for loading/unloading parts) Z-axis mm (in.) 360 (330 up to #0074) Spindle: Spindle speed min-1 40 to 4,000, Speed range Auto 2 ranges Spindle nose JIS A2-6 Spindle bore mm (in.) ∅62 (2.44) Spindle Front bearing ID mm (in.) ∅100 (3.94) Turret: Type V12 VDI NC non-lift No. of tools 12 OD tool shank mm (in.) 25 × 25 (0.98 × 0.98) (VDI toolholder shank dia.: 40 (1.57)) ID tool shank dia. mm (in.) ∅40 (1.57) (VDI toolholder shank dia.: ∅40 (1.57)) Turret ID tool shank dia. sec 0.15 Indexing time (per station) Rapid traverse m/min (fpm) X: 6 ...
Description: S/N: 186064 Machine ON time approx.: 8.000h Spindle ON time approx.: 1.595h X axis travel: 260 mm Y axis travel: 115 mm Z axis travel: 510 mm W axis travel: ,595 mm C axis: 0-360 degree (0.001' increment) Between ,center distance: 450mm Swing over bed: 580mm Swing over carriage: 470mm Max turning diameter: 340mm Max. workpiece weight (main spindle): 180kg Max. spindle speed main spindle: 5000 1/min Max. spindle speed sub spindle: 6000 1/min Turret positions: 12 NOTE: Tools are not included.  , turning diameter: 340 mm, serial number: 186,064, x-motion: 260 mm, y-motion: 115 mm, z-motion: 510 mm, Read off working hours: 1,595 h, control: OSP-P300L, toolchanger positions: 12, turning speed range: 5,000 rpm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 4,500 x 2,300 mm
Description: Serial Number: 183567 , MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller Travel: X-axis: 6.700 mm Y-axis: 4.100 mm Z-axis: 800 mm W-axis: 1.200 mm Table to spindle nose: 0 to 1800 mm Table Dimensions: Working Surface: 3000x6500 mm Maximum Load capacity: 37.000 kg T-Slots (width x Nº): 24 H7 x 15 Height from Machine Bottom: 950 mm Spindle Speed range: 30 to 4.000 min-1 Taper bore: 7/24 Nº 50 Bearing dia meter: Ø 100 Kit 5C Specifications Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing) Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1) 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW) BC attac ...
Description: SPINDLE - Spindle speed : 12000 rpm AXES - Axis Strokes : X=760 - Y=560 - Z=460 mm Equipped with : - 1 CN OKUMA OSP E100 m - 1 Chip conveyor Stock N° : 7244 z-motion: 460 mm, x-motion: 760 mm, y-motion: 560 mm, control: OKUMA OSP E100 m, turning speed range: 12,000 rpm, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,650 x 2,000 x 3,000 mm
Description: MAIN SPINDLE - bar diameter: 50 mm - Max swing over bed : 400 mm - Spindle bore: 53 mm - Maximum turning diameter: 210 mm - Spindle speed: 6000 rpm SUB SPINDLE - bar diameter: 50 mm - Spindle speed: 6000 rpm TURRETS - number of turrets: 2 - number of positions: 12 - number of motorized positions: 12 - Axis stroke: X=195 - Z=700 mm Equipped with : - 1 CN OKUMA OSP-U100 l - 1 Parts Collector - 1 Set of fixed and rotating tool holders - 1 Chip conveyor - 1 Barloader LNS MINI SPRINT Stock number: EX845 turning diameter: 210 mm, serial number: 0353, x-motion: 195 mm, z-motion: 700 mm, Accessories included: Yes, control: OKUMA OSP-U100 l, toolchanger positions: 2x12, number of places for driven tools: 12, spindle bore: 53 mm, turning speed range: 6,000 rpm, weight approx.: 6,600 kg, Approx. Onsite Dimension. (l x w x h): 8,500 x 2,300 x 2,500 mm
Description: - Distance between centers : 350 mm - Maximum grinding diameter : 200 mm Stock N° : 7420 grinding diameter: 200 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,850 x 2,400 x 2,600 mm
CNC control, control panel, machining center -Disassembled from a: CNC lathe Make: Okuma type LB15 -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg
swing over bed: 550 mm Swing over cross slide: 530 mm control: OKUMA OSP-U100L travel -x1 axis: 475 mm travel -x2 axis: 160 mm travel -z1 axis: 1.170 mm travel -z2 axis: 1.155 mm travel -y axis: 160 mm travel C - axis: 360° ° travel B - axis: 210° ° numbers of positions in the tool changer: 84 number of tapers in turret head: 12 Dimensions (L x W x H): 4.320 x 2.645 x 2.900 mm weight of the machine: 12.500 kg CNC Turning- and Milling Center | OKUMA - MacTurn250-W with palletizing system and robot handling The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. turning diameter: 580 mm turning length: 1500 mm control: OSP 7000 L greates pass round over bed: 610 mm swing diameter over slide rest: 580 mm Main spindle:: turning speed range - main spindle: 12 - 2.800 min/-1 spindle bearing diameter: 150 mm spindle bore: 110 mm spindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kW C-Axis: 0,001 ° axis stroke:: x-axis: 598 mm y-axis: 230 (+110 / -120) mm z-axis: 1.660 mm feeds:: rapid traverse: X / Y: 12.000 mm/min rapid traverse: Z: 20.000 mm/min rapid traverse: C: 100 min/-1 cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/U turret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos. driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1 tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock:: diameter of quill: 120 mm quill stroke: 170 mm taper of center: ...
control: OSP 5000L-G greates pass round over bed: 450 mm turning diameter: 400 mm turning length: 730 mm Tool turret 12 positions: transmission ratio: 4 chuck: 300 mm total power requirement: 35 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3890 x 2880 mm BIG MASCHINE 450 X 730 MM 2 TURRET CNC CONTROL OSP 5000 L WITH OUT TAILSTOCK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1040 mm y-travel: 508 mm z-travel: 560 mm Control: Okuma type: OS 5020 M Table load: 1000 kg spindle taper ISO: 50 turning speeds: 5000 U/min table surface area: 508X1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mm y-travel: 610 mm z-travel: 560 mm control: OSP Potencia total requerida: kW peso de la máquina ca.: t dimensiones de la máquina ca.: m
Carrera X: 650 mm Carrera Y: 410 mm Carrera Z: 450 mm : Carrera: X VOR 1000 mm Control: MC4VA Potencia total requerida: kW Peso de la máquina aprox.: T Dimensiones de la máquina aprox.: M
: máx. 800 mm longitud de torneado: máx. 800 mm mandril: ohne documentación: inkl. peso de la máquina aprox.: 8 t
Diámetro de giro: 903 mmLongitud de giro: 1000 mmPosiciones de la torreta: 0CNC Marca: OkumaCNC Modelo: OSP 700 L MACH-id 5585 HACER OKUMA TIPO LU 45 M YOP 2001 características técnicas Giro máx . 903 mm Eje X 440 mm Eje Z 1090 mm Diámetro del husillo 110 mm Rango de velocidad 2800 rpm Potencia del husillo 45 kW Velocidad herramientas en vivo 2000 Rpm Control OSP700L Transportadores de virutas Pinole taper 5 Mk Carrera pin ...
Turning diameter: 470 mm Turning length: 1065 mm Turret positions: 12 CNC Brand: _Unknown / Other CNC Model: OSP-P200L Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg
Turning diameter: 900 mm Turning height: 900 mm Chuck diameter: 800 mm Number of chucks: 1 CNC Brand: _Unknown / Other CNC Model: OSP-P200L Max. turning Ø: 900mm Table Ø: 800mm Horizontal movement support:900mm ATC / revolver: 12 Speeds / ranges: 2000Rpm Power: 30kW Length: 5200mm Width: 3500mm Height: 3400mm Weight: 14000kg
Turning diameter: 0 mm Turning height: 290 mm Chuck diameter: 72 mm Number of chucks: 3 CNC Brand: Okuma CNC Model: OSP-200 X Travel 290 Z Travel 590 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos
Diámetro de giro: 530 mmLongitud de giro: 1000 mmPosiciones de la torreta: 12CNC Marca: OkumaCNC Modelo: OSP-U100 Giro máximo: 530 mm Eje X: 280mm Eje Z: 1.000mm Diámetro del husillo: 100mm Rango de velocidad: 4500Rpm Potencia del husillo: 15kW ATC / revólver: 12 Velocidad herramientas en vivo: 4000Rpm Transportador de chip: Sí Ojo de la herramienta: Sí Pinole cónico: 5Mk Pinole de carrera: 120mm Pluma : 90mm Longitud: 2.200 mm Ancho: 2.000 mm Altura: 2.200 mm Peso: 6.200 kg
Turning diameter: 420 mm Turning length: 300 mm Turret positions: 22 CNC Brand: Okuma CNC Model: OSP7000L Max. turning Ø: 420mm X-Axis: 210 + 90mm Z-Axis: 1250mm Spindle bore: 72mm Speedrange: 3500Rpm Spindle power: 30/22kW ATC / revolver: 22 Speed live tools:3000Rpm Speed live tools:3000Rpm Power live tools:3,7kW Pinole taper: 5Mk Stroke pinole: 150mm Quill Ø: 100mm Length: 4500mm Width: 3000mm Height: 2200mm Weight: 7300kg
Turning diameter: 420 mm Turning length: 1075 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP 7000 L Max. turning Ø:420mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 80mm Speedrange: 3500Rpm Spindle power: 15kW ATC / revolver:12 Chip conveyor: Yes Pinole taper: 4Mk Length: 4000mm Width: 2240mm Height: 2100mm Weight: 7400kg
Diámetro de giro: 300 mmLongitud de giro: 1000 mmPosiciones de la torreta: 0Posiciones ATC: 60 Eje controlado por número: 0 CNC Marca: OkumaCNC Modelo: Robot de carga Hacer Okuma MACTURN Tipo MACTURN 30 W Año 1999 Máquina perforadora de torneado de molino multitarea Altura central (mm) Cama oscilante = 300 Distancia central (mm) Longitud = 1.000 Diámetro del husillo ATC 60 posiciones OKUMA Robot de carga Eje B completo Eje C completo
Table length: 1000 mm Table width: 460 mm Longitudinal X: 762 mm Cross Y: 460 mm Vertical Z: 460 mm Positions ATC: 32 Positions APC: 0 CNC Brand: Okuma CNC Model: OSP-U100M 3-axis CNC machine (VMC)Okuma - MB-46VA MACH-ID 8708 Make: Okuma Type: MB-46VA Control: OSP-U100M Year: 2004 X - Travel762 mm Y - Travel460 mm Z - Travel460 mm Table Length1000 mm Table Width460 mm Table load800 Feed rate X-Axis40000 mm/min. Feed rate Y-Axis40000 mm/min. Feed rate Z-Axis32000 mm/min. Spindle Taper40 ISO/Bt/Mk Power on spindle11 kW Speeds / ranges8000 Rpm ATC / revolver32 Coolant through spindle / Bar20 Number of controlled axis3 Chip conveyorYes Coolantsystem
Diámetro de giro: 580 mmLongitud de giro: 1000 mmPosiciones de la torreta: 12CNC Marca: OkumaCNC Modelo: OSP P 200 L Okuma - Space Turn LB 3000 MY Torno CNC con eje C/Y MACH - ID 6346 Marca: Okuma Tipo: Giro espacial LB 3000 MY Control: OSP-P200L YOP: 2006 Máx. giro 580 mm Eje X 260 mm Eje Y 115 mm Eje Z 1.000 mm Diámetro del husillo 80 mm Rango de velocidad 4200 rpm Potencia del husillo 30 kW ATC / revólver 12 Velocidad herramientas en vivo 6000 Rpm Control OSP-200 Transportador de virutas Sí Ojo de herramienta Sí Dimensiones Longitud ...