usava KRAFT para venda

Diâmetro do gira-discos 1500 mm Velocidade de rotação do prato giratório 4 - 10 rpm Velocidade da carruagem de elevação 1,4 – 4 m/min Sacos de entrada de empilhadeira frente e verso Conexão de alimentação 230 Volt 1 Ph – 50/60 Hz Carga ligada 0,75 kW Plataforma giratória Fixstop na posição inicial STD Plataforma giratória Soft Start and Stop STD Dimensões máximas da palete (CxL): 800 x 1200 mm Altura máxima de enrolamento: 2200 mm Peso máximo da carga: 2000 kg Diâmetro máximo do rolo (filme): 230 mm Altura do carretel de alumínio: 500 mm Espessura do filme: 17-35 μm

Válvula de paragem mecânica KRAFT 100 mm de diâmetro Alavanca AluHand Dispomos de três peças deste modelo em stock, juntamente com muitas outras válvulas de tubo, válvulas de entrada, retalhos, cruzamentos de tubos para uma ampla gama de aplicações. Estamos ansiosos por ouvir de si!

turning diameter:402 mm turning length:750/1000 mm control: 808 turning diameter over slide rest:380 mm centre height:200 mm bed width:250 mm :135 kg spindle taper:4 MK spindle nose:A2-5 spindle bore:42 mm spindle turning speed range:40-2800 (3) U/min longitudinal feed:0-5000 mm/U cross feed:0-5000 mm/U diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW :8605 DIN Weight approx.:1/1,3 t CNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

faceplate diameter:8000 mm swing diameter:10000 mm turning height:4500 mm workpiece weight:120/200 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2300 mm slide stroke:horizontal: 5300 mm cross section of ram:300x300 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:270 t Machine size (LxWxH):14000x10000x9000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the ri ...

turning diameter:502 mm turning length:1000/1500 mm control:Siemens 808D turning diameter over slide rest:305 mm centre height:250 mm bed width:300 mm :225 kg spindle taper:4 MK spindle nose:A2-6 spindle bore:58/105 mm spindle turning speed range:40-2300(3) U/min longitudinal feed:0-5000 mm/U cross feed:0-5000 mm/U diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:5,5 kW :8605 DIN Weight approx.:1,6/1,8 t CNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

faceplate diameter:10000 mm swing diameter:10000 mm turning height:5000 mm ram head dimension:280x280 mm workpiece weight:200 t table turning speeds:0.23 ? 14 U/min transmission ratio:2 Stück Travel of Ram (vertical):2500 mm Travel of ram (horiz.):5150 mm Machine size (LxWxH):ca. 19500x11500×11600 mm main drive:132 kW weight of the machine ca.:290 t CNC controller:Siemens 828D/Fanuc 0i TF hydr. components:Kompass (Taiwan) Rams:2 (konv. + CNC) Stk. servo spindle motor:Siemens/Fanuc CE-design:optional Stock machine with short delivery time of only approx. 3-4 months. Main components available! Brand new vertical lathes double stand, type KRAFT, type VTL - 100 CNC incl. Siemens 828D or Fanuc 0i TF with two tappets (one piece of conventional and one piece CNC controlled ram) Substantially parts of the hydraulics of Taiwanese manufacturer compass Illustration similar. Also leasing and hire ...

x-travel:600 mm y-travel:450 mm z-travel:450 mm spindle speeds:40-2000 1/min (vertikale Spindel) / variabel spindle taper:40 ISO spindle stroke:60 mm table surface area:850 x 450 mm (horiz.) table surface area:1190 x 250 mm (verti.) table load capacity:300 kg T-slot (width-distance-quantity):14 x 63 x 7 (für horiz. Tisch) mm T-slot (width-distance-quantity):14 x 63 x 3 (für vert.Tisch) mm feed:10-1000 mm/min feed stepless:in allen Achsen rapid traverse x + z axis:1200 mm/min :1200 mm/min. main drive:5,5 kW weight of the machine ca.:ca. 1750 kg dimensions of the machine ca.:ca. 1600 x 1800 x 2000 mm European electric:im Wesentlichen von Schneider spindle protection:von Techno PIU (Italien)

turning diameter:950 mm swing diameter:1200 mm turning height:800 mm faceplate diameter:800 (hydr.) mm spindle drive:37/45 kW weight of the machine ca.:16,5 t dimensions of the machine ca.:4600x5500x5330 mm new machine ex stock Taiwan with: Max. Swing Diameter 1200mm Max. Turning Diameter 950mm Max. Turning Height 800mm FANUC 0iTD Control System High Pressure Pump(7kg/cm2 ) Auto Luberication System Tool Holder BT50 for RAM Main Spindle Motor 37/45kw X Axis AC Motor 4.0 kw Z Axis AC Motor 7.0 kw C-axis Motor a8 7.5/11kw+MZI(0-2400RPM) Brake System for spindle X Axis Rapid Feedrate 20 m/min Z Axis Rapid Feedrate 20 m/min X Axis Travel :645 mm Z Axis Travel :800mm ATC Tools 12 Tools Spindle Nose A2-15 ZF Gear box Germany Chip Conveyor & chip car Oil/water separator Hydraulic system 3 Jaw Power Chuck 32" Hydraulic Unit Work Light Auto Lubrication System Power requirment 75KVA Machine Size : ...

turning diameter:620 mm turning length:2000 mm control:FAGOR 8055 max. swing over slide:410 mm bed width:350 mm spindle drive:17 kW spindle taper:A2-8 ASA spindle speeds:0-2500 1/min. spindle bore:105 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm rapid traverse x/z:15/12,5 m/min weight of the machine ca.:3,5 t dimensions of the machine ca.:3940 x1350x1810 mm automatic tool changer:PRAGATI; aut. Revolver mit angetr. Stationen DTT80 12 POS. fach tools:1 Satz servo spindle motor:von FAGOR sowie Achsmotoren von FAGOR fixed steady rests:1 Stk. live center:1 Stk. follower rest:1 Stk. 3 jaw chuck Ø:315 (hydr.) mm New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

x-travel:3200 mm y-travel:2000 mm z-travel:800 mm table-size:3200 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:10 t distance between columns:1840 mm distance spindle nose and table:180~980 mm spindle drive:22/26 kW max. torque on the spindle:560/662 Nm spindle nose:50 BT spindle speed:6000 U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):8927 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:29 t positioning accuracy:0,025 (gem. VDI/DGQ3441) mm repeating accuracy:0,020 (gem. VDI/DGQ3441) mm CNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (ve ...

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/46 kW max. torque on the spindle:140.1/286.5 Nm (S6-25%) spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:25 t positioning accuracy:0,020 (gem. VDI/DGQ3441) mm repeating accuracy:0,015 (gem. VDI/DGQ3441) mm CNC controller:Heidenhain TNC 620 automatic tool changer:Optional gear box:BF Getriebe (optional) chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband inner coolant:20 bar CE-design:vom TUEV Used Milling Machine KRAFT VM-3218 with ...

x-travel:3100 mm y-travel:3600 mm z-travel:1066 mm table-size:3200x2050 mm max. table load:10000 kg distance between columns:2800 mm distance spindle nose and table:300~1366 mm spindle drive:31 kW(S1)/40 (S6-40%) kW spindle nose:A100 HSK spindle speed:10000 U/min rapid traverse X,Y:12/12 m/min. rapid traverse Z-axis:12 m/min Machine size (LxWxH):8775x7140x7378 mm weight of the machine ca.:59 t positioning accuracy:X , Y , Z Axis : ±0.005/2000 mm; A Axis ? ±0.002 ° C Axis ±0.002 ° mm repeating accuracy:X , Y , Z Axis ±0.0055/2000 mm, A Axis : ±0.002 ° C Axis ±0.002 ° mm automatic tool changer:24 fach CNC controller:Siemens 840 UNIVERSAL AUTOMATIC A-C TYPE 2.5° MILLING HEAD (VG:AC52 mit A-/C-Achse linear guide:in X-Achse 4 Stück CE-design:als Option (verlängert die Lieferzeit) New Milling Machine KRAFT VM-5225 For more information please see the attached documents.

x-travel:850 mm y-travel:600 mm z-travel:530 mm table-size:950x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:8000 1/min spindle taper:40 BT spindle drive:15 kW Tool changer:24 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2870x2200x2810 mm weight of the machine ca.:6,3 t CNC controller:Fanuc 0i MD + MANUAL GUIDE i FUNCTION + 10.4" LCD MONITOR automatic tool changer:24 fach Metric, 400V 50Hz 3 Phase:mit Trafo Tool setter:Option von BLUM oder Renishaw inner coolant:Vorbereitung: ohne Pumpe, ohne Filter, ohne Tank (gegen Mehrpreis) Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD MONITOR. Our Taiwanese supplier is the lar ...

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm Machine size (LxWxH):2200x4000x3415 mm high speed directl spindle motor:20000 1/min CNC controller:Heidenhain iTNC-530 Full 5 axis chip conveyor - auger:im Bett :Marposs mida laser 75P Tool setter:Marposs mida laser 75P Scales:X/Y/Z Achse von Heidenhain Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TN ...

turning diameter:652 mm turning length:2000 mm control:FAGOR 8055i turning diameter over bed slide:455 mm bed width:350 mm spindle taper:A2-8 spindle speeds:30-1700 (3 Stufen) 1/min. spindle bore:80 mm feed stepless:0-5000 mm/min tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm tool post size:25x25 mm power requirement:7,5 kW coolant pump:0.37 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:3920x1605x2014 mm :8605 DIN repeating accuracy:0,01 mm positioning accuracy:0,01 mm turret:4-fach mit Schaftaufnahme (Hersteller Pragati) CNC controller:FAGOR 8055 automatic stepless gear box:3 Stk. electronic hand wheel:für X- und Z-Achse :in deutscher Sprache coolant system:151 L chip conveyor and trolley:Option steady rests:Option different chucks and faceplates:Option New CNC lathe KRAFT ST 285/1000 w ...

turning diameter:450 mm turning length:1500 mm control:Fagor 8055 oder Fanuc max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1500 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:3300x1215x1750 mm automatic tool changer:8-fach (PRAGATI) CNC controller:Fagor 8055 tools:1 Satz Made in Europe For more information please see the attached documents

turning diameter:280 mm turning length:250 mm control:Fanuc 0i TF swing diameter over bed slide:280 mm Bar capacity:44 mm spindle speeds:4800 1/min x-travel:155 mm y-travel:+/-35 mm z-travel:250 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:11/15 kW Machine size (LxWxH):1.842x2.793x2.446 mm machine weight:5000 kg feeds:0.001-500 mm/U c-axis:0.001 ° turret:16-fach, BMT-55 type Y-axis:über Revolver mm hollow chuck:hydr. 200 mm :8 bar tailstock:ohne! brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air ...

x-travel:1050 mm y-travel:600 mm z-travel:530 mm table-size:1100x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:10.000 1/min spindle taper:40 BT (opt. SK) spindle drive:10 (Riemen) kW Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t CNC controller:HEIDENHAIN TNC620 (MC1620) automatic tool changer:30 fach Tool setter:Option von BLUM inner coolant:20 bar chip conveyor:Typ Schnecke im Maschinenbett, 2 Stück Factory-new, immediately available, vertical CNC machining center with: 1. CONTROL SYSTEM HEIDENHAIN TNC620 (MC1620) 2. WORKING TABLE SIZE 1100 × 600 MM 3. X/Y/Z AXIS STROKE 1050/600/530 MM 4. X/Y/Z AXIS RAPID TRAVERSE 48/48 ...

turning diameter:360 mm turning length:530 mm control:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mm swing diameter over bed slide:360 mm Bar capacity:64 mm spindle speeds:3500 1/min spindle speed:Gegenspindel: 5000 1/min x-travel:230 mm y-travel:±51 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:17 (Hauptspindel) kW spindle drive:5,5/7,5 (Gegenspindel) kW Machine size (LxWxH):3290x2180x2337 mm machine weight:6100 kg c-axis:0.001 ° turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mm hollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 bar hydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor)  ...

turning diameter over bed:650 mm turning diameter over slide:450 mm turning length:1435 mm bed width:350 mm spindle bore:155 mm spindle speed:50-800 (3 stufig, stufenlos) U/min spindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mm tailstock quill diameter:95 mm tailstock quill taper MT:5 MK tool post size:25x25 mm power requirement:7,5 kW weight of the machine ca.:2400 kg dimensions:3020x1140x1770 mm DRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 Stück Factory new center lathe with 2-axis digital display and variable speed and many more. CHARACTERISTICS: Powerful, flexible and productive With ...

turning diameter:570 mm turning length:2000 mm control:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mm bed width:350 mm spindle taper:A2-8 spindle speeds:0-2500 1/min. spindle bore:80 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm chuck size:250 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2970 kg dimensions of the machine ca.:3325x1350x1810 mm automatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mm tools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

:HBM-110L spindle diameter:110 mm x-travel:900 mm y-travel:900 mm z-travel:1400 mm W-axis (spindle longitudinal):600 mm U-axis:Planschieber: 180 mm B-axis (table):360x1 ° table load:5 t table-size:1100x960 mm T-slots:22 Stk. spindle speed:22 Stufen, 8-1000 1/min spindle taper:50 ISO rapid speed:(X / Y / Z / W) 2500 mm/min speed - faceplate:4-200 (18 Stufen) 1/min torqe of face plate:1960 Nm dia of faceplate:600 mm movement of facing slide:180 mm weight of the machine ca.:11500 kg main drive:7,5 kW Machine size (LxWxH):4910x 2454x2750 mm 2-Axis DRO :für X- und Z-Achse (von NEWALL)

:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position  ...

faceplate diameter:5700 mm swing diameter:6300 mm turning height:4000 mm total power requirement:DC 110 kW workpiece weight max.:100 t table speeds:0.2 ~ 20 U/min Torque:des Tisches 300 kN.m slide stroke:vertikal: 2000 mm ram diameter:280 mm rapid traverse:2000 mm/min control:CNC Siemens oder Fanuc _ head swivability:-15°?+30 ° weight of the machine ca.:127 t Rams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories. Further technical details and accessories appearing in Appendix.

faceplate diameter:7100 mm swing diameter:8000 mm turning height:5000 mm total power requirement:DC 132 kW workpiece weight max.:180 t table speeds:0.2 ~ 20 U/min Torque:des Tisches 300 kN.m slide stroke:vertikal: 2500 mm ram diameter:320 mm rapid traverse:2000 mm/min control:CNC Siemens oder Fanuc _ head swivability:-15°~+30 ° weight of the machine ca.:127 t Rams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories. Further technical details and accessories appearing in Appendix.

turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15 kW max. workpiece weight between centers:4000 kg Weight approx.:6800 kg machine width/height:1500x1500 mm machine length:5150 mm 4-jaw independent chuck:800 mm steady fixed:Ø40~350 (mit Rolleneinsätzen) mm fixed steady:Ø100~520 (mit Rolleneinsätzen) mm follower rest:Ø30~120 mm multifix tool holder:Größe C Factory new heavy  ...

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW DRO:für 2 Achsen von FAGOR center morse:2 Stück 3 jaw chuck Ø:200 mm Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter:450 mm turning length:1000 mm control:FAGOR 8055 max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FAGOR 8055 tools:1 Satz :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::10-125 mm with live steady:10-80 mm power requirement:4 kW center morse:2 Stück 3 jaw chuck Ø:diverse Größen als Option Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

workpiece diameter:5-125 mm grinding depth:50-1000 mm clamping length:1000 mm total power requirement:1.9 KVA weight of the machine ca.:630 kg max. workpiece weight:100 kg Center Hole Grinding Machine. Workpiece must be rotated by machine during grinding

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1500/1000 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:750 kg :225 kg spindle bore:58 mm spindle turning speed range:85-1250 (3 Getriebestufen) U/min spindle nose:A2-6 longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW Machine size (LxWxH):(Spw. 1500mm) 3130x960x1550 mm machine weight:2090 kg center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

faceplate diameter:2500 mm swing diameter:3000 mm turning height:1700 mm max. turning diameter:2800 mm weight of the machine ca.:53 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter:2000 mm swing diameter:2500 mm turning height:1700 mm max. turning diameter:2300 mm weight of the machine ca.:52 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

faceplate diameter:1250 mm swing diameter:1600 mm turning height:1350 mm max. turning diameter:1350 mm weight of the machine ca.:32 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

turning diameter:1250 mm swing diameter:1100 mm turning height:1000 mm total power requirement:37/45 kW weight of the machine ca.:18 t dimensions of the machine ca.:4500x2520x4605 mm Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

x-travel:3000 mm y-travel:1000 mm z-travel:1500 mm T-slot (width-distance-quantity):22H8x7 Stk. mm Table area:3100x1050 mm max. table load:8000 kg spindle taper:50 SK spindle speeds:3500 1/min. spindle motor:15/18,5 kW feed:1~8000 mm/min rapid speed:10 m/min positioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVA weight of the machine ca.:18 t dimensions of the machine ca.:7670x4325 (LxT) mm universal milling head:2,5° auto automatic tool changer:24-fach LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung cnc control:HEIDENHAIN 640i TNC chip conveyor:Schneckenausführung vorne/hinten TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY ...

turning diameter:220 mm turning length:200 mm control:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min. spindle nose:A2- 6 bar material dia.:44 mm C-axis:0,001 ° x-travel:155 mm z-travel:220 mm rapid power traverse in X-and Z direction:20 m/min spindle drive:11/15 KW ( FANUC ßiL12/10000 ) coolant:8 bar Weight approx.:2,4 t Machine size (LxWxH):1560x1450x1760 mm 3-jaw hydraulic chuck:200 mm turret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz +SPECIAL PRICE+SPECIAL OFFER+ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of  ...

turning diameter:50 mm turning length:40mm bei Automatisierung; sonst 100 mm control:Fanuc Oi-TF (8,4 '' LCD-Monitor) greates pass round over bed:230 mm Bar capacity:26 mm spindle speeds:6000 1/min spindle nose:A2-4 spindle drive:3.7/5.5 KW (Fanuc ?3/10000i) spindle bearing diameter:70 mm rapid power traverse in X-and Z direction:30 m/min travel -x axis:220 mm travel - z:220 mm automatic feeds:0,001-5000 mm/min Machine size (LxWxH):1370x1630x1750 mm hydraulic motor:0,75 kW hydraulic pump:30 L/min hydraulic tank:30 l servo motor X-axis:0,75 kw servo motor Z-axis:0,75 kw weight of the machine ca.:1,5 t machine dimensions:1490x1870x1610 xx coolant system:100 L tool holder:innen, außen, Bohrhülse etc. collet chuck:mit Adapter (hydraulisch) GANG TOOLING SYSTEM:(Linearschlitten; kein Revolver) facing tool holder:3 Stk. OD tool holder:2 Stk. I.D. TOOL HOLDER :(Ø 20 MM) X 4 Stk. BORING SLEEVE ...

turning diameter:300 mm turning length:320 mm control:Fanuc 0i TD MG max. swing diameter:520 mm spindle speeds:4800 1/min. spindle passage:44 mm spindle drive:7,5/9 kW brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 170/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 100 mm 7. Bar capacity Ø dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 500 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guide 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20.  ...

turning diameter:300 mm turning length:600 mm control:Fanuc 0i TD swing diameter over bed slide:320 mm swing over bed:520 mm bar material dia.:64 mm spindle speeds:4500 1/min. spindle drive:11/15 kW turret:12-fach Tool setter:manuell brand new CNC turning center with Contains: 1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY) 2 X/Z AXIS STROKE 170/600 MM 3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN 4 SPINDLE MOTOR 11/15 KW 5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE) 6 SPINDLE BEARING DIA. F 120 MM 7 BAR CAPACITY DIA. F 64 MM 8 HYD. HOLLOW CHUCK 10" X 3 JAWS 9 HYD. UNIT FOR CHUCK WITH AIR COOLER 10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS 11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12 ELECTRICAL CABINET WITH HEAT EXCHANGER 13 STANDARD SPLASH GUARD 14 COOLANT UNIT 15 TRANSFORMER (POWER SOURCE 380V) 16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17 MACHINE COLOR TONGTAI WHITE/DRAK GRE ...

turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar capacity:51 mm spindle speeds:4500 1/min. x-travel:200 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min tailstock quill stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg live center:4 MK turret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mm brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. un ...

turning diameter:520 mm turning length:500 mm control:Fanuc Oi-TF max. swing diameter:520 mm spindle speeds:4500 1/min. spindle drive:11 / 15 kW brand new CNC slant bed lathe with Contains: 1. Control system Fanuc Oi-TF (8,4" LCD monitor) 2. X/Z-axis stroke 170/400 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 KW 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. 100 mm 7. Bar capacity dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 275 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guard 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20. Fanuc warranty (wes ...

x-travel:510 mm y-travel:400 mm z-travel:350 mm table-size:600x400 mm spindle speeds:12000 (Motorspindel) 1/min. spindle drive:5,8 kw spindle taper:30 BBT oder SK rapid traverse in x-y-z axis:60 m/min Tool changer:16 fach weight of the machine ca.:2,8 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/min inner coolant:20 bar chip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPACITY: 250 KGS 4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP) 5. SPINDLE MOTOR 5.8 KW (1PH8087) 6. SPINDLE NOSE BBT 30 7. X/Y/Z STROKE 510/400/300 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. ATC CAPACITY 16 TOOLS (DISC TYPE) 10. STANDARD SPLASH GUARD 11. ELECTRICAL CABINET WITH HEAT EXCHANGER 12. COOLANT UNIT 13. MANUAL PULSE GENERATOR 14. RIDGID TAPPING  ...

turning diameter:600,630 mm turning length:549,790,1290,1475,1526 mm control:Siemens/Heidenhain/Fanuc

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:830|1080|1330|1580 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/900 ...

turning diameter:2000 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:1640 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/9000/10000 mm machine width/height:2500 x 2400 mm max. workpiece weight ...

x-travel:1250 mm y-travel:470 mm z-travel:540 mm spindle speed:40,55,80,115,160,225,315,440,620,880,1240,1750 U/min (12 Stufen) spindle taper:50 NT/BT/SK table load:1000 kg table-size:400x1800 mm T-slot (width-distance-quantity):18x4x80 mm distance spindle nose and table:50-520 mm (vertikal) distance spindle center to table:50-520 mm (mit Halter), 360-790 mm (ohne Halter) feeds:X/Y/Z:16-1200/16-1200/8-450 mm/min rapid travel x/y/z:2000/2000/700 mm/min distance spindle center to column:500 mm spindle drive:5,5 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3000/2535/1830 mm CNC controls from:Siemens/Fanuc/Fagor/Heidenhain