fresadoras usadas para venda

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and  ...

The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / m ...

Machine Type: CNC Universal Tool Milling Machine Manufacturer: DECKEL Model No.: FP 4-60 Year of Make: 1995 Condition: very good Offer type: used machine Specifications: Control: Dialog 12 Table: 900 x 520 mm Travel range: x = 600 mm y = 500 mm z = 450 mm Stroke: Quill stroke 80 mm Speed range: 31.5 – 5000 rpm. Tool holder: SK 40 Drive: 7.5 kW Remark: automatic tool clamping, electric handwheel, coolant device, complete documentation Weight: 4100 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity. ... mais informação

Control STYLE Clamping table surface ... 1520x510mm Axis X ... 1320mm Axis Y ... 660mm Axis Z ... 700mm Spindle speed ... 1-6000 rpm L x W x H ... 2620x2560x2200mm The machine is in good condition, possible to test under electricity. ... mais informação

Stock number: 3891 PROCESSING Manufacturer: HERMLE, Type: B300 U 5 axis Machine NO.: 19368, Year of manufacture: 2008 Specifications: Large table load 250 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Spindle speeds 15000 rpm Spindle motor 15/10 Kw Total power 41 KVA A-Ash +/- 110 degree C: Ash 0.001 degree Tool changer 30 places Rapid traverse 30 m/min Control Heidenhain TNC 530 Fabr. Controlled in axes 5 Operating hours spindle 7294 hours Accessories: Cooling by spindle CNC turntable. 280 Chip conveying. Touch Probe Renishaw Cooling by spindle Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2900 mm, Width: 3340, Weight: 8500 kg  ...

Maho MH 500 W3 - CNC tool milling machine - Maho CNC 332 CNC control - new LCD display - incl. instruction manual & documents - Built in 1989 Specification Workspace: - X-axis: 500 mm - Y-axis: 380 mm - Z-axis: 350 mm Workroom: - Clamping surface: 254 x 354 mm - Number of guide grooves: 1 Working spindle: - Tool holder: ISO40 - Quill stroke: 50 mm Speeds & Feeds: - Working spindle speeds infinitely variable: 20 - 5000 rpm - Feed range X, Y & Z axes: 1 - 2000 mm/min Rapid traverse: - X & Z axes: 4 m/min - Y-axis: 2 m/min Electrical equipment: - Voltage: 400 V - Total connected load: 19 kVA CNC Control: - Resolution of linear displacement measuring systems: 0.001 mm - Readings: Screen - Number of axes controlled at the same time: 2 - Number of sequentially controlled axes: 3 Weight & Space Requirements: - Dimensions WxHxD: 2235 x 1943 x 2375 mm - Weigh ...

Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

System 3R WorkPalCompact - Pneumatic pallet changer For the automatic change of pallets in chucks on machine tables of milling machines, wire EDM machines, laser machines or grinding machines.Specification - currently configured for 12-pallet System 3R MacroMagnum (Ø 160 mm) - Version with turbo function for chucks - Footprint approx. 1200 x 1200 mm

Pinnacle LV117 - CNC Machining Center - Heidenhain iTNC530 CNC control - Tool changer with 30 places - Additional tank for internal spindle cooling (20 bar) 580 liters - Paper tape filter - Year of construction 2012 Specification Table: - Table size: 1300 x 700 mm - Travel ranges X/Y/Z: 1140 x 710 x 610 mm - Max. table load: 1000 kg - Spindle nose to table surface: 110 - 720 mm - T-slot width/spacing/number: 18 mm / 125 mm / 5 Spindle: - Tool holder: ISO40 - Spindle diameter: 70 mm - Distance between spindle centre and column: 760 mm - Spindle speed: 40 - 8000 rpm - Main motor: 7.5 kW Feed: - Rapid traverses X/Y/Z: 24 / 24 / 24 m/min - Feed speed X/Y/Z: 10000 mm/min ISO40 Automatic Tool Changer: - ATC Type: DISK - Cam type: DAUL ARM - Tool selection (bidirectional): random - Tool positions: 30 - Max. tool diameter: 90 mm - Max. tool length/weight: 250 mm ...

Intos FNGJ 40 - Tool Milling Machine - Automatic feed in X, Y, Z axis - Heidenhain Positip 850 3-axis position indicator - Hydraulic tool clamping - Coolant device - Workplace lighting - Year of construction 1993 Specification - X-axis travel: 600 mm - Y-axis travel: 400 mm - Travel Z-axis: 400 mm - Spindle speed: 63 - 3150 rpm (18 steps) - Spindle cone: SK40 - Table dimensions: 800 x 400 mm - Motor power: 4 kW - Voltage: 400 V - Power consumption: 8 kVA - Dimensions WxHxD: 1800 x 2000 x 2050 mm - Weight: 2200 kg

TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...

FPT Industrie TESSEN EVO - Travelling column milling machine - Heidenhain TNC640 CNC control - portable electronic handwheel HR520 - Manual docking of the frog head to the machine - Universal head with 0.001° pitch - Static RTCP in the room - Tapping without compensating chuck for mechanical milling heads - Collision monitoring sensor - 2 tool magazines of 40 positions each ISO 50 - 2 posts for loading and unloading tools in the magazine - Wireless touch probe - Internal and external coolant supply (LEIU-LEU) - Internal compressed air supply - Pendulum machining with a partition wall - Full enclosure with roof - Workspace lighting - Bed flushing - Chip conveyor with ejection on the right side - Programmable adaptive control - Teleservice (remote diagnosis) - GREEN MODE function to optimize the energy consumption of the machine - FPT Standard Paint -Magnetic - NC ...

- Control: Heidenhain TNC 310 track control - Clamping surface: 400 x 800 mm - Max. table load: 400 kg - Travel distances: X= 620, Y= 420, Z= 400 mm - Tool holder: ISO 40 - Spindle speed: 50 - 4,000 1/min Dimensions LxWxH: 2300 x 2350 x 1970 mm Weight: 1,900 kg  ... mais informação