milling machines used for sale (2,475)

x-travel:14000 mmy-travel:3100 mmz-travel:1.200 mm (220 - 1.420) mmdistance between columns:4.417 mmtable-size:14.000 x 2.500 mmworkpiece weight:15.000 kg/mdrive capacity - spindle motor:25 kWspindle cone:63 HSKspindle turning speed range:18000 rpmmilling feeds:30000 mm/mindimensions of the machine ca.:15.000 x 8.418 x 6.033 mmweight of the machine ca.:135 tCNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...

x-travel:1000 mmy-travel:1150 mmz-travel:700 mmtable-size:900 mmtable load:1500 kgspindle speeds:10.000 1/minspindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nmspindle taper:A100 HSKT-slots:18mm/7/100 mmmilling feed range:20.000 mm/minrapid traverse feeds:X/Y/Z: 24 m/mindiameter of tools max.:150 mmworkpiece length:300 mmweight of tools max.:20 kgweight of the machine ca.:15 tdimensions of the machine ca.:s. Katalog mCNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fachScales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20

Table dimensions: 5000 x 2000 mm Auction-ID: A7-32339-6

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed  ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)6,31 x 4,8 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWMaximum load (table centre)1000 KgDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5850 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Preparation 4th axis EA 510.L indirect (Siemens)Preparation for rotary table (4th axis) Lehmann EA-510.L with indirect measuring system Option includes: - Electrical and pneumatic preparation - Software preparation to work with rotary table - Cycle TRACYL which allows to define contour on the cylinDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive air purge for m ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline Multi-Touch Control CharacteristicsMaximum load (table centre)1000 KgDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1400 x 560 mmWeight approx.6050 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rateTropical PackageTropical Package Option includes: - Active Cooling Unit for Electrical Cabinet - Additional Ventilator for Control Panel Recommended from 35°C to max. 45°C environmental temperatureDirect measuring syst ...

GeneralHorizontal machining center; Control: Control F31iB with CELOS CharacteristicsSpeed max.-20000 rpmDimensions (L x W x H)3,08 x 4,79 x 2,86 mMax. tool length550 mmSpindle taperBT 40 Tool Magazine with60 PositionsRapid feed X / Y / Z60/60/60 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMax. work piece height1000 mmMax. work piece diameter800 mmMaximum load (table centre)500 KgSwivelling range360x1 degreeTable size500x500 mmDrive power (40% DC)26 kWDrive power (100% DC)18,5 kWWeight approx.12000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-speed spindle 20,000 min-1, 37/ 26/ 18.5 kWHigh-Speed Spindle 20,000 min-1, 37/26/18.5 kW Mot ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 60 pocketsTool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loadingChip removal package with cabin roofSwarf removal package chip conveyor Coolant - air-blast changeover Swarf con ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axi ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinChip removalChip removal: manual, from the chip troughCoolant supplyCoolant supply: Multi-jet strip at spindle head, switchable from coolant to air (max. 6 bar / 90 psi, 6 water jets, 6 air jets) Pump capacity: 70 l/min / 18 gallon/min (theoretical pump perform ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 780 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 x 0,0 ...

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

Control Siemens ... Sinumerik 840D Sl Clamping table surface ... Diameter 1200mm Axis X ... 2200mm Stand passage... 2125mm Axis Y ... 2425mm Axis Z ... 1000mm Max.table load ... 6000kg Rapid traverse ... X,Y,Z 15 000m/min Total power requirement ... 110kVA Number of positions in the tool changer ... 100 Max. tool weight ... 15kg IKZ ... 60bar Machine weight ... 50000kg Spindle speed 12000 rpm Spindle mount. HSK 100T Workpiece Probe Renishaw OMP 60 Tool Probe Renishaw TS 27R Rinsing gun Handwheel 3x chip conveyor Documentation The machine is in good condition, possible to test under power.

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

1 used: Universal milling machine, used • Manufacturer: Klopp • Model : FW 11/4 • Year of manufacture: unknown approx. 1970 • Table clamping surface: 1100 x 300 • Spindle mount: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12-340 mm/min Accessories: Various holders and milling cutters, 1 set of collets Hydraulic vise with pneumatic support bolts Vise jaw width 160 mm

This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details.