presses for wood used for sale (284)

Manufacturer: Robert Bürkle Machine Type: Hydraulic Plate/Veneer Press Suitable for pressing veneers and wood-based materials Large-format press plates Solid industrial design Used condition Type, year of manufacture and technical data currently not readable Functional condition not checked Sale in existing condition Auction-ID: A1-51205-8023

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

Veneer press Joos Type HP 90 Pressing area 2550 mm x 1350 mm Gold Anodized Press Plates Ripcord all around Swivel keyboard operation Press chamber height, insertion height 400 mm Total pressing pressure 900 KN Press cylinder 4 pieces, diameter 90 mm Spec. Pressure at full design 2.7 kg/cm² Spec. Pressure at 2m² Design 4.5 kg/cm² Operating pressure 355 bar Power requirement 1.1 kW Closing time approx. 16 sec. Basic dimensions approx. 2950 mm x 1560 mm x height 2210 mm Weight 3,600 kg

Code: 0511 Brand: POR Model: JUNIOR - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard Technical data Briquette diameter mm 50 Max briquette length mm 60 Output kg/h 30/50 Motor Hp 7,5 Drum diameter mm 1000 Pump lt 40 Inspection door Overall dimensions mm 1680 x 1100 x 1500 h Weight kg 680

Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions f ...

For Sale: ORMA NPL-8-160 Hydraulic Hot Press – 160 Tons The machine is used, has undergone a technical inspection, is fully operational, and is ready for use. Before purchase, the machine can be started and thoroughly inspected at our company's premises. The main advantages of this machine include a maximum pressing force of 160 tons, the ability to operate using only the central hydraulic cylinders when gluing shorter workpieces, and an automatic pressure compensation system. The press is equipped with heating platens suitable for water, glycol, or oil heating, as well as a pressing time controller with automatic platen lowering at the end of the cycle. Technical Specifications: • Manufacturer: ORMA • Model: NPL-8-160 • Year of manufacture: 1991 • Platen dimensions: 3500 × 1300 mm • Maximum opening between platens: 480 mm • Flat, clean platens, free from  ...

Working width: 3000 mmworking depth: 1200 mmNumber of pressing surfaces: 3 Stk.range L-W-H: 4500 x 2200 x 2100 mmWeight: 1500 kgTRIMWEX hydraulische 3 - Etagenpresse Typ SLV - HPR3 - 100 Technische Daten- Arbeitslänge 3000 mm- Arbeitsbreite 1200 mm- Verleimdicke 20 - 100 mm- Anzahl der Ebene: 3- Verpressung erfolgt mit einseitigem hydraulischen Zylinder - Anzahl der Zylinder pro Ebene 6- die Druckzylinder sind fest- Zylindertyp Ø 50 x 150 mm- Spezifische Druck 4,5 kg/cm2- Anzahl der Niederhaltern pro Ebene 4- jeder Niederhalter hat einen pneumatischen Zylinder- Typ der pneumatische Zylinder Ø 50 x 75 mm- jeder Niederhalter hat eigenes Ventil für Ein/Aus der Luft- Druckregulation mit Regulator- Hydraulisches Aggregat- Pumpendurchfluss 5,5 l- Leistung der Hydromotor 2,20 kW- max. Druck für der Hydromotor 30 - 130 bar- Parkplatz für die Niederhalter- Drehe ...

TECHNICAL DATA: Work surface: 2550 x 1350 mm Solid worktops Including mezzanine level 04 Hydraulic cylinder: Ø 90 mm Vertical stroke: 550 mm Water operation Installed power: 2 hp

Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Frame press Maweg hydraulic Type: EURO-AUTO Year of Make: 1991 Machine No. 09111003001 Crimping dimension L 2700 mm x H 1800 mm 3 movable press rams with 1 hydraulic each. Cylinder from above 1 movable stop beam from the right with 2 hydr. cylinders Bearing surface of the printing plates 120 x 100 mm Cylinder stroke 200 mm 3 brackets for low parts, length 300 mm Pneumatic quick adjustment system of the upper press punches With 3 mm rack and pinion grid system 2 Hand Safety Automatic Control complete with hydraulic pump Dimensions 3600 mm x 900 mm x H 2500 mm

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...

Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800

Working height 900mmNominal width 1300mmEffective working width 1270mmRolling pressure force max 40kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 1000mmPlate thickness min 3mmPower supply 2,2kWDrive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Capacity: 2 x 2.70 m.3 x vertical pushers2 x horizontal pushersPneumaticMobile

Capacity: 3000 x 1900 m.4 x horizontal presses2 x vertical pressure beamsHydraulic pump with 3 kW motor

Throughfeed carcase clamp Carcases:Width: 280 to 1320 mmHeight: 250 to 2800 mmDepth: 150 to 800 mm.Working height in the press: 500 mmMechanic clamping (electrical motors)

Electrical spindle drivemin/max furniture length: 20 cm / 2m50min/max furniture height: 20 cm /1m25max furniture width: 65 cmWorking height: 50 cmPressure horizontal and vertical: 0 - 1200 KpTotal power installed: 3 kW

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

pressure: 300 tpassage width: 2050 mmstroke: 1200 mmtotal power requirement: 55 kWweight of the machine ca.: 55 tdimensions of the machine ca.: mHydraulic Try-Out Press (Four-Column Press)Pressing force: 3.000 kNMaximum slide stroke: 1.20 mmTable size: 2.050 x 1.300 mmDistance between columns: 2.050 mm (long side), 700 mm (short side)Maximum distance from mounting surface to slide: 1.350 mmMinimum shut height: 250 mmPower requirement: 55 kWTank capacity: 1.200 lTotal weight: 55.000 kgPress height: 5.800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shelf press for veneering ORMA NPC 6/100 Shelf length 2500mm Shelf width 1300mm Number of batches 3 Automatic pressure boosting Safety cable "breakaway" Water press heating with water from the CO system Working pressure 350bar Press on 6 actuators Piston rod diameter 85mm CE Certificate Machine dimensions 340x165x255cmH Machine Weight 6000kg

3 × AMANDUS KAHL 65-1500 Flat Die Pellet Mill – NEW 2025, in original crates Three brand-new AMANDUS KAHL 65-1500 pellet mills (2025), never installed, still in original factory crates. Ready for immediate delivery from Istanbul, Turkey. Kahl’s flagship and the largest flat die pellet mill on the market: up to 12 t/h per mill, up to ~36 t/h for all three. The mills come from a cancelled project and are offered at an attractive price well below the factory price. Package includes: 3 complete pellet mills with hydraulic, lubrication and oil systems EAPR automatic press control with 3 switch cabinets and remote maintenance 12 flat dies 1500 × 100 mm (9 × 8 mm, 3 × 10 mm) 72 pan grinder rollers, 18 breaking arms with knives Technical documentation (EN/TR) Technical data: die diameter 1500 mm, 630 kW drive, 10–12 t/h per mill. Suitable for wood, biomass, straw and gre ...

The second-hand Maweg Euronova-S hydraulic frame press is designed for pressing and assembling windows, doors and frames in professional woodworking. Featuring swivelling pressure shoes, it is also suitable for sloping windows. Technical data: Press height: 2,250 mm Press width: 4,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press. ThermoformingPreheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counter ...