wood working machines used for sale (9,227)

used IMA ADVANTAGE 320 Edge gluing machines. Equipment: - Joining milling unit - Gluing part with pressure zone - Cross-cut unit - Radius/chamfer/flush milling machine - Shape milling unit (2-motor) - Profile scraper blade - Wing scraper blade - Buffing unit - Release agent spray unit - Detergent spray unit Technical data: Workpiece: Workpiece thickness min. 8 mm (or 12 mm with profile scraper), max. 60 mm Workpiece length min. 150 mm Workpiece width min. 150/65 mm with workpiece thickness 25 mm Smallest workpiece 65 x 300 mm / 150 x 300 x 19 mm Edge material: Edge thickness 0.3 - 3 mm Edge height 12 - 65 mm Edge length min. 200 mm Max. edge cross-section: Roll 150 - 180 mm, strip 480 mm Machine data: Length 6,630 mm Width 2,050 mm (hoods open) Height 1,700 mm (hoods closed) Min. distance to the wall: 1,000 mm (aggregate side) Weight: approx. 3000 kg Uppe ...

used Panhans 240A. Panhans 240A Low Spindle Milling Machine Spindle diameter 30mm Spindle length 130mm Spindle speed variable 3000/4500/6000/9000r.pm Electronic spindle height adjustment Electronic angle adjustment Main motor power 11kw Additional longitudinal carriage mounted to the workbench 3-roller feed Net price

used JET OES-80CS. Tape dimensions 150 x 2,260 mm Belt speed 17m/sec Connection 400V, 3~, 50 Hz, 2.5A, 1.5 kW Weight approx. 120 kg

used JET JWS-34KX. Wooden sling jaws (with long right sling jaw) Tool Ø max. 180 mm Speed 1,700/3,500/6,000/8,000 rpm (manual belt reposition) Connection 400 V, 3~, 50 Hz, 5A, 2.2 kW Weight approx. 156 kg

used HAFFNER KF20. Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

Key data: 2500 mm, 1240 mm, 100 mm

used SCM TECH Z 25 PLUS R4R4. CNC Machining Center SCM Type TECH Z 25 PLUS R4R4 Year of manufacture 2005 In 2022 new control system KVARA6 4A AN +6A MECH- ESA-GV (for 9,000 EUROS) Working range X between stops 2500 mm Vertical bores Y 1018 mm Milling Y 1240 mm Plate throughput maximum 180 mm Maximum panel thickness Z = 100 mm Stroke Z axis 200 mm Central lubrication at the top and bottom Drilling unit with 15 vertical spindles 6 horizontal spindles, 4 in the X direction and 2 in the Y direction Spindle speed 4000 rpm. Motor power spindle rotation 2.2 kW Travel speed of the X-Y axes 42.4 m/min. Travel speed Z axis 11.5 m/min. Main spindle approx. 6.6 kW Maximum speed of the main spindle 24000 rpm. Front tool changer with 4 tool holders Rear tool changer with 4 tool holders Rectangular Vacuum Cups 16 Pieces Tool holder HSK 63 Compressed air 6/7 bar, compresse ...

used. Small sander operating in 380V tri. Supplied with 26 abrasive belts for metal (abrasive: borazon), for satin finishing of stainless steel and for wood. Sliding table, manually height-adjustable (dimensions: 170 x 65 cms). Belt dimensions: 4200 x 150 mm. Machine delivered with: 10 new 3M strips 150 grit for wood or aluminium (value approx. 350.-€ excl. VAT) For the satin finishing of stainless steel: 1 new strip, green color 2 strips almost new, burgundy colour 1 almost new strip, grey colour for sanding stainless steel (3M borazon abrasive): 6 x 40 grit belts, partially used 4 x 80 grit belts, partially used 2 grain120 strips, partially used.

used Schredder ISVE Zerkleinerer Shredder MR2260. AGICOM Recycling Machines The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Control: Siemens Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: up to 400 kg/hour (depending on material and perforated screen) Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage Year of Make: 2019 Machine in good condit ...

used Holzkraft HBS 840 AS. Wood Band Saw Holzkraft HBS 840 AS Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

used Tiger. Window suspension conveyor Tiger Surface area on the ceiling approx. 8.50 m x 3.20 m 20 hooks with 2 points already dismantled and ready for loading Shipping Dimensions 1 pallet 2800 mm x 800 mm x H 500 mm Weight 119 kg 1 pallet 1200 mm x 800 mm x H 600 mm Weight 120.5 kg

used MAKSER TEAM MF 1450. Model MF 1450 I working table 1400x2800x350 mm II working table X-Y-U servo motors 1,5 kW, 120-2000 rpm Z servo motor 1 kW, 120-2000 rpm Processing engine 8,5 kW, 24000 rpm Vacuum system 308 m³/h Automatic tool changing 6 pcs Horizontal processing engine 2.2 kW, 12000 rpm File formats can be operated DWG, DXF, IGES Power and air consumption 14 kW- 8 Bar Made in Turkey 2015 y Transport dimensions 6500x2150x2300 mm Weight 3500 kg Price 10700 Eur (EXW Jonava, Lithuania

used WOODLAND MACHINERY MX5115. Model MX5115 Table size 640 × 580 mm Table tilt 0-45° Vertical table stroke 100-120 mm Maximum working thickness 50-120 mm Engine power 2.2 kW / 3.0 kW Power supply 220 V / 380 V, 50Hz Spindle speed 15,000/18,000 rpm Tool shank diameter 6.35 mm - 12.7 mm Transport dimensions 780 × 710 × 900 mm Weight 150/180 kg Price 760 Eur (EXW Jonava, Lithuania)

used MAWEG EURO SPEZIAL. Type EURO SPECIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1.5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

used Untha RS 30-4-S. Chopper Untha – Four-Wave Hacker Type: RS 30-4-S Year of manufacture: 8/2007 CE 4 waves of hackers 2 motors of 11 kW each Perforated mesh diameter 20 mm Cutterbar opening 450 x 560 mm Filling opening L1000 mm x W 1280 mm Hopper height 1040 mm Main shaft speed approx. 23 rpm. Speed secondary shaft approx. 34 rpm. Operating hours 2681 h Workplace-related sound pressure level approx. 84 dB (A) Sound power level approx. 97 dB (A) The material to be shredded is pulled in by the cutting unit and pre- and post-shredded in a single operation by the main and secondary cutting unit. Dimensions: L 1340 mm x W 1090 mm x H 1920 mm Weight: 1240 mm

used Weinig Profimat 23E. Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Down 7.5kw 7.5kw rights Left Mount 7.5kw 11kw pit Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pull roller clamps Electric pressure beam adjustment Input table length 1970mm Table top lubrication system Year of manufacture 1999 Machine dimensions 420x180x189cmH Machine Weight: 3200kg

used SCM Sandya Uno. SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price

Key data: 310 mm, 240 mm, 3 kW

used Hammer A3-31. 400 V, 50 Hz, 3.0 Kw, 6.2 A, Spiral knife shaft 310 mm, Chip removal 4 mm, Feed rate 6m/min, manually switchable, Height adjustment manually, Thickness table 630x310 mm., Dressing table left 630x310 mm, Dressing table right 730x310 mm, Dressing stop swivels 45 °, Suction nozzle 120 mm

used ECOKRAFT LP22 Pelletizing plant. TECHNICAL SPECIFICATIONS Manufacturer: ECOKRAFT Description: Pelletizing plant with two pellet pressing lines including bagging and packaging in small containers Type: Stationary Type: LP22 Year of manufacture: 2023 / Commissioning: 2024 Hours: 448 Essentially consisting of: - Hacker HA1100 for shredding coarser raw material - Discharge belt with overbelt magnet - Conveyor belt with permanent magnetic roller - Granulator SMC 500/700 - Extraction via pipe and hose lines - SMU60 filter system - 2 x MB3LX material bunkers - Dosing systems - 2 x LP22 pellet mills - 2 x conveyor belts for screening plants - 2 x FT screening plants - Bagging machine AS900 Detailed technical description on request.

used WEGOMA VS 48 Feed Feeder. gebr. Feeder 4 Rolls WEGOMA VS48 0.55 / 075 kW (380V / 16A plug) 8 Speeds: 2 / 3.3 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 m/min. Rubber rollers in good condition ex location Fixed Price

used Amandus Kahl C39-1000. Motor Power 200 kw Dics diameter 6 mm Used for wood pellet production Can be inspected under power

used OMEC TA185. Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 5.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

used Holzkraft Minimax t45c LL. Table milling machine wood power with 3-roller feed Type: Minimax t45c LL Year of Make: 2022 CE Table milling machine with rigid milling spindle, gray cast iron work table, Table extension and pull-out workpiece support and 3-roller feed VSA 38 B1 - Work table L 1945 mm x W 695 mm, table height 900 mm - Spindle speeds 3500/7000/10000 rpm. - Spindle protrusion over table max. 130 mm - Milling spindle right-left rotation - Useful length of the spindle 100 mm - Spindle diameter 30 mm - Tool diameter can be lowered max. 180 mm - Tool profile milling diameter max. 210 mm - Motor 5 kW 400 V 50 Hz - Suction nozzle 2 pieces each 120 mm diameter - Incl. aluminium stop jaws, table extensions left and right, sheet milling protection cover and extendable workpiece support (up to 1950 x 550 mm) on the machine front Very good condition Machine  ...

used BÜRKLE CASC 1300 Bürkle Filler Applicator. Bürkle CASC 1300 Filler Machine

used Josting FAZ. Chopper, Faz Model, Manufactured by Josting

used HEMA UH 800. HEMA UH 800 YOC 1982 Motor power 4 kW Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,600 mm APA roller guide (Panhans) top + bottom Chassis incl. various Gebr. Band Saw Blades The machine was completely repainted. In addition, the machine was restored. The drive belts have also been replaced. Extraction connection: D 125 mm Dimensions: approx. 149 x 900 x 246 cm (W x D x H) Weight: 720 kg Manufacturer information

Key data: 4 , 230 mm, 150 mm

used Weinig Quattromat. Four-sided planer Weinig Type: Q 22 Quattromat Year of Make: 1990 Planing width 230 mm Planing height 150 mm Length of dressing table 1960 mm 4 shafts: 1 Bottom 4 kW 2 on the right and 3 left driven by 1 motor 5.5 kW 4 above 5.5 kW Feed speed 6 - 22 m/min. Feed cardan, feed motor 2.2 kW Lubricant pump manual With soundproof hood Including planer heads 2 pieces length 230 mm 2 pieces length 150 mm Weight with substructure 1,620 kg Dimensions 3350 mm x 1450 mm x H 1600 mm

used Bürkle DAK 1400 LAM 4 Walzen. Bürkle DAK 1400 glue applicator from first owner in neat condition: – Machine for glue application on one and both sides – Glue application at the top and bottom (4-roller machine) – Stable industrial design – Direct drive of the applicator rollers – Separate direct drive of the dosing rollers – Dosing gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable by sliding clutch – Infeed with 3 driven rollers for part length min. 350 mm – Spout with 3 driven knife discs for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push button – Working width max. 1400 mm – Passage height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Crea ...

used Becker+Van Hüllen Presse. A deck press, also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

used Kuper Hymmen AS 220. Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

used Kuper Hymmen AS 220. Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

used Kuper Hymmen AS 220. Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

used MICROTEC GOLDENEYE 600 Wood Quality Check Scanner. Manufacturer: MICROTEC Model No.: GOLDENEYE 600 Year: 2014 Condition: Used Stock number: 9397 The offer includes: MICROTEC touch panel Control cabinet Equipment: Technical documentation

used FBR Export. FBR Export Long Grinder Table length 2900 mm. Table width 800 mm. Vertical stroke 550 mm. Tape length max. 7800 mm. Belt width 150 mm. Belt feed power 2.2/3kw 0.25kw Table Lifting Motor Overall dimensions 4400 x 1370 x 1400 mm.

used Weinig Powermat 1000. Weinig Powermat 1000 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle layout: Down 7.5kw Right 5.5kw (power lock) Left 5.5kw Right 5.5kw (power lock) Mount 11kw (power lock) Down 15kw Top 7.5kw (power lock) Down 7.5kw All spindles 8000r.p.m Inverter-adjustable feed speed up to 30m/min Electro-motorized positioning of the working height and width Weinig power com system Pneumatic Material Clamps 2 smooth rolls in a working balat Worktop length 1970mm Carda shaft drive Net price

used Weinig Powermat 1000. Weinig Powermat 1000 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle layout: Down 7.5kw Right 5.5kw (power lock) Left 5.5kw Right 5.5kw (power lock) Mount 11kw (power lock) Down 15kw Top 7.5kw (power lock) Down 7.5kw All spindles 8000r.p.m Inverter-adjustable feed speed up to 30m/min Electro-motorized positioning of the working height and width Weinig power com system Pneumatic Material Clamps 2 smooth rolls in a working balat Worktop length 1970mm Carda shaft drive Net price

used Kallfass KFP. Kallfass KFP-4000-4 Stacking Package length 2500mm Feeding to planer feeder Conveyor for spacers Net price

used SCM S 50. Thickness planing machine Fabr SCM Model S 50 Engine 5.5 Kw 4 knife shaft Feed rate 7.5-25 m/min Planer width 500 mm Planer height 240 mm 2 reels in the table

used Ledninek Superles 400 4v/4f. Ledinek Superles 400 4V/4F Planing Width 410mm Planing Height200mm

used Hofmann AD 634. Combined dressing and thickness planing machine from Hofmann with the legendary Leitz-Wigo spiral knife shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary With a "real" spiral wave. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment by handwheel Fluted steel feed roller rubberized pull-out roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife shaft with spiral-shaped, resharpenable HSS knives there are two sets of spiral knives, each built into matching pressure jaws. Resharpening is carried out by the sharpening service, and the sharpened knife sets are then simply s ...

used Mebor HTZ 1100. Log band saw Mebor Type: HTZ 1100 Year of Make: 2001 Motor power 22 kW Maximum cutting width 900 mm Maximum cutting length 8000 mm Maximum trunk passage frame width with seat 1450 mm Maximum trunk clearance frame width without seat 1700 mm Clearance height cutting height maximum 700 mm Complete with sharpening machine and spare sharpening discs Saw blade roll diameter 110 mm Saw blade roll width 95 mm Saw blade length 7200 mm Saw blade width 110 mm Including saw blades 7 pieces With log turner 3 hydraulic stem clamps Hydraulic pump 4 kW The height adjustment works electrically via a motor mounted above the sawing unit. The height is adjusted via 2 trapezoidal threaded spindles, which are connected to each other via a chain running in the frame. The saw unit drives itself. The operator goes along. Ready for immediate use and immediately availabl ...