peripheral equipment (e.g. heating,cooling,drying) used for sale (464)

Key data: 140 °C, 6 kW, 45 W

Special items Various temperature control units pressure-overlaid up to 140 C°

Hydraulic power unit with pressure accumulator

Key data: 300 °C, 2 kW, 144000 W

used oil temperature control unit with 5.5 kW pump max. pre-fuse 80 A electr. Connection 35 kW little used

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00

- Stainless steel - Bag of 4 with 1.2 m centrifuge - 40 hp - Label separator - Double Big bag holder

Central supply with drying system Manufacturer Moretto Consisting of the following components: 1.0 pcs Dry Air Dryer Manufacturer Moretto, Type: SX25, Year of Make: 2016 1.0 pcs Pipe Station Manufacturer Moretto 4.0 pcs Drying hopper, capacity: 200 litres, with heating, type: H15T SOPP, year of construction 1999 1.0 pcs drying hopper, capacity: 100 litres, with heating, type: H15T SOPP, built in 1999 1.0 pcs drying hopper, capacity: 30 litres, with heating, type: H15T SOPP, built in 1999 8.0 pcs Material conveyor to the drying hoppers, type: R101 042, year of construction: 1999 8.0 pcs Material conveyor to the machines, type: R101 042, year of construction: 1999 1.0 pcs Vacuum Pump

Auction-ID: A7-42665-25

Auction-ID: A7-42665-20

Auction-ID: A7-42665-13

Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000

Brand: Nordson PPS Type: Vacuüm oven Model: JCP Mini 2424 Dry Air Quantity : 200 m3 / h Dimensions (LxWxH): 910 x 755 x 1.120

MOBERT Roller Bag maker 110 6M, for OT bags-in-a-roll with paper band, working on 2 or 3 lanes with gummed paper sleeves., Bag sizes:, Hight range 250-1500, Width 2 lanes from 150 to 460, Width 3 lanes from 150 to 300, Length 2 lane range 150 - 425, Length 3 lane range 150 - 280, Maximum speed 250 rpm, Main unwinder material width 620 - 1650 mm., Outer reel diameter 900 mm., Inner reel diameter 76 mm., Machine dimensions 11.000 x 3.650 x 2.400 mm., 380 V - 50 Hz, Constructed in 1998, excellent conditions, availability: immediate, working width: 1.100 mm., conditions: excellent, running, type: bags-in-a-roll

VERTICAL MIXER 16.000 lt., Total height approx 6.450 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serie nr.: 08 020 044/07 0135 Dry Air Quantity : 200 m3 / h Hopper capacity: 3 × 300 dm³ Connected Load max KW: 38 kW Year of manufacturing 2015 and Model: PTUSET Year of manufacturing 2017 Connected Load max KW: 9,0

BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure

Merk: Werner Koch Technik GmbH Model: CKT 110 Bouwjaar: 1999 Bo Ud Dju Aqg Sjvycjww Hoeveelheid droge lucht: 110 m³ /h Volume bak: 400 L

Type Loedige TSHK-160/KGU-400 Serial No. 3901 Year of manufacturing 2004 Hotmixer 210 Liter Blj Uovzzw Ued Dvycsp Coolingmixer 391 Liter

HERBOLD PU500 PULVERIZER, used for PVC, PE, PP, Output: 500-600 kg/h depending on materials, Constructed in th 90s but refurbished in 2010, Granulator with 55 kW drive, Siemens control, Blower, Grinding discs: Old and new ones, Electrical connections overhauled in 2010, Bearing housing in need of repair (possible supply of the machine reconditioned), installed power - used power in work: about 60-65% : 55 KW, capacity: 500-600 kg/h, type: PU500

AIR SEPARATION SYSTEM, for labels, dust, light weight contamination on flakes, granules and regrinds, An effective way to remove dust and light contaminants from chips is to pass material through an aspirator-type cleaner. In the aspirator, the reground plastics fall through an upward airflow that is set to suck up the light particles, while the cleaned regrind falls through the outlet at the bottom of the aspirator., For a capacity max 1.000 kg/h depending on material, constructed in painted steel + galvanized steel elements Complete system with Ø 160 mm.pipes, curves, clamps, cyclone, hoppers, sleeve Central body, lower and upper hoppers,, bolted hatch for cleaning purposes 0.37 Kw 4-pole motor Reducer, regulation valve, Complete with 0.75 Kw vent., Possible addition of big bag supporting structure with weighing system, For higher capacity, see ref. [GE461](.germanplast.eu/listings/41 ...

ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2 ...

Control System: Touch-screen operator panel Operation: Automatic color mixing and dosing Components of the Machine - Touch-screen control panel (CMA Challenger 151) - Integrated dosing & mixing system - Agitator / stirring unit (working components for mixing) - Pneumatic system / pressure control (pressure gauge and pneumatic connections) - Quick-release connections for tools/stirrers - Recipe management software (AURORA MIX / formula control system or equivalent), with integration into color-matching systems.

Single TL 1-12-B10/20-TKN6 Water Temperature Control System Applications: • Temperature control in plastics processing • Tool and mould making •Chemical industry • Testing and laboratory applications Temperature range up to 90 °C Max. external volume 61 l Heating capacity 12 / 18 / 24 kW Cooling capacity 35 kW (20 °C flow) / 100 kW (15 °C cooling water) Max. flow rate 200 l/min Max. delivery pressure 3.8 bar Pump motor power 3.0 kW Connections circulating medium G 11/4" Connections cooling water hose 18 mm Dimensions (L × W × H) 690 × 400 × 880 mm Weight approx. 75 kg Heat transfer medium water For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!