other machinery for waste disposal and recycling used for sale (414)

Waste water neutralisation, Capacity: 8 m3/h, Operation / Control: Control cabinet with touch-screen display / WAGO, Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Manufacturer: SBM Model: Remax 1111 Machine Type: Mobile Crushing Plant Year of Manufacture: 2017 Drive Power: 15 kW Weight: 4,500 kg Operating Hours: - Diesel Engine: 5,366.7 hours - Crusher: 4,568.8 hours - Hydraulics: 373.4 hours Find more here - / Contact us at -

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -

A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.

Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Engine: Deutz diesel engine – 163 HP, • Maksimale Produktionskapazität: bis zu 150 t/h, • Maximaler Vorschubgröße: 700 mm, • Impact Crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg, Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Maximum production capacity: up to 150 t/h, • Maximum feed size: 700 mm, • Impact crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48") - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - / Contact us at -

Manufacturer: Bonfiglioli Type of Machine : Scrap shear This machine has sustained fire damage. The main structure and the cutting unit remain intact, including the knife, cutting cylinder, and quick-opening function. Find more here - / Contact us at -

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

ANACONDA FTR 200 with CAT 2.8 (55kW) – TIER 5, ANACONDA FTR 200 with JCB Dieselmax (55kW) – Tier 5, ANACONDA FTR 200 with DEUTZ TD 2.9 L4 (50kW) – TIER 5, 20 m long conveyer belt, Bunker standard 6 cm³ with optional increase 10 cm³, Hydraulically foldable rear section, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 4-ply construction., Hopper capacity: max. 10 m³ (with extensions), Variable speeds, Hydraulic support legs for easy setup, Hydraulisch klappbarer Kopfbereich serienmäßig, Easy access to the engine bay, Weight: 14.485 kg – 14.485 tons depending on equipment, Weight with tipping grate: 17,000 kg, Weight with vibrating screen: 18.985 kg, Weight with tipping grate: 17.000 kg, Weight with vibrating screen: 18.985 kg

CAT – 9.3 – STEP 5 (310 kW), FLSMIDTH RAPTOR 250 cone crusher, Direct-drive coupling and pulley, Hydraulic adjustment in closed position and overrunning protection, Maximum suction diameter: 235 mm, Minimal CSS: 6 mm, Hydraulically foldable hopper flap plates, Hopper volume: 6.5 m³, Continuous load and material monitoring, Safety devices as standard, Local lubrication points, Ultraschall level sensor standard, Radio remote control standard, Circulating sieve box 12 ft x 5 ft (3.66 m x 1.52 m), Upper and lower deck, Additional transfer conveyor 500 mm, Maximum intake diameter: 235 mm, Minimal CSS: 6 mm, hopper volume: 6.5 m³

ANACONDA TR100 with CAT 2.8 (55kW) – TIER 5, ANACONDA TR100 with JCB Dieselmax (55kW) – TIER 5, ANACONDA TR100 with DEUTZ TD 2.9 L4 (50kW) – Tier 5, 33 m long conveyor belt, hydraulically foldable inlet and rear area, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 3-ply construction., Weight: 19.000 kg – 19 tons depending on equipment

Series equipment:, ANACONDA DF 514 with CAT 4.4 (110kW) – Tier 5, High-performance screening box 4.27m x 1.52m 2-deck screener, Side tensioned screen deck system (upper and lower deck), Bunker volume of 7.2 m³, Variable speed at bunker belt 4-layer belt conveyor, Screening box angle adjustable between 15–19º, Sieve box paths for maintenance and screen change, Variable speed for main and side conveyors, BUNKER:, Width: 2.7 m, Length: 3.7 m, Maximum volume: 7.2 m³, BUNKER CONVEYOR, Width: 1200 mm, Type: Flat cable, COLLECTION CONVEYOR, Width: 1200 mm, FEED conveyer belt:, Width: 800 mm, Throw height: 3.80 m, MID conveyer belt:, Width: 800 mm, Outlet height: 3.60 m, OVERBONDED TRANSPORT BELT-HECKBAND:, Width: 1200 mm, Outlet height: 3.40 m, length: 3,7 m, Maximum volume: 7,2 m³, width: 1200 mm, Type: Flat ribbon, width: 800 mm, width: 800 mm, Ejection height: 3,80 m

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -

Year of manufacture: 2018 Curb weight: approx. 5.8 tons Capacity for construction waste 20-30 t/h Water filling: 4m³ Water requirement: 1m³/h E-connection: 2 x 16 A CE plug The system is mounted on a container frame and has two extended conveyor belts for heavy cargo and light cargo. Both straps are designed to be foldable for transport.

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

We offer a new unused cable peeling machine from a small German company specializing in recycling machines. The machine is new and unused and can be used for different cable diameters. from 10 - approx. 50 mm the machine is very robustly constructed

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info