gluespreader machines used for sale (583)

Edgebanding machine for linear panels, serial number 10790970 Auction-ID: A7-46472-4

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION from stock Lieboch

Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Excellent condition - Fully operational - Loading / Transport possible! The WDN0004 automatic edgebander has been designed for the hot use of pre-glued tapes for finishing linear and shaped panels. Thanks to this technology, the thickness between the edge and the panel is practically non-existent, allowing an excellent finish. Quick to register and start. In just 2 minutes the machine is ready to work. Product of the Italian brand Freutek, it is made with a scratch-resistant worktop and sturdy sheet metal structure, equipped with an automatic feeder. With double scrapers for a clean and glue-free result. Automatic facing of the front and rear excess edge. Equipped with auxiliary rollers located on the working base to obtain an optimal pressure of the panel on the gluing unit. it is equipped with a powerful 3.59 Kw motor for working. The Freutek WDN0004 is complete with protection agai ...

Excellent condition - Fully operational - Loading / Transport possible! control: OMRON Feed speed: 12 m/min panel thickness: 10 - 60 mm height of the edging material: 14 - 64 mm Edge Thickness: 0.4 - 3 / 8 mm Min. panel length: 150 mm min. Panel width: at 150 mm length: 85 mm at 250 mm length: 50 mm Air supply: 7 bar suction flow rate: 30 m/sec. power: 10 kW, 400 V, 18 A, 50 Hz pre-milling of the element Teflon Coated Hearth cross cut Edge Milling corner milling Form Scraper Glue Scraper polisher

Professional edge banding machine from the quality brand HOLZ-HER, type Sprint 1417 K. Solid industrial machine from working environment and still fully functional. Equipped with an extensive finishing line including diamond planes and corner rounding up to 3 mm radius. Ideal for interior construction, furniture production, kitchens, custom cabinets and general sheet material Technical data: Brand: HOLZ-HER Type: Sprint 1417 K Year of construction: 2001 Connection: 400V – 3-phase Frequency: 50 Hz Total machine length: approx. 6 meters (excluding trolleys) Maximum panel thickness: 50 mm Maximum edge thickness: 3 mm Throughput speed: 6 m/min Working width: unlimited - Configuration / operations: The machine has the following professional units: Double planer head at the front Gluing unit Hacksaws Milling units Scrapers Corner rounding Extractor/fine scraper Polishing ...

Code: 0380 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2100 x 700 x 1250 h Weight kg 350

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

6-60 mm, joint cutter, multi-cutter, copy, scrapers radius/phase, Auction-ID: A1-41994-3

Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 m ...

automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: 8mm - 50mm; Workpiece width: min.110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Flat - Scraper: Yes; Radius Scraper: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 623 kg;

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements!Intuitive operation with the eye-S control and 10 large touchscreen:- HMI Maestro Active Edge- Graphic display of all processing units an ...

Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg  ...

AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40553-15

Excellent condition - Fully operational - Loading / Transport possible! maximum workpiece thickness 45 mm minimum workpiece length 220 to 350 mm maximum edge material height 50 mm minimum edge material length for fixed dimensions 330 to 400 mm maximum edge material protrusion top and bottom 2.5 mm Edge material protrusion front approx 10 to 20 mm Edge material rear protrusion ca 10 to 30 mm . minimum workpiece width 90 mm minimum workpiece thickness 10 mm maximum length with extension arm 4269 mm Working length with boom 4269 mm Depth with roller plates 1425 mm Working table height 888 mm Working width with support pushed in 210 mm Working table width with support rail extended 680 mm With milling unit

Working height 900mmNominal width 1400mmEffective working width 1370mmRolling pressure force max 5kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 350mmPanel thickness min 3mmGlue hot melt PURApplication rate 40-80g/mDriving power 6kWTempering device 24kW

Excellent condition - Fully operational - Loading / Transport possible! Control POWER CONTROL PC 20 PLUS Infeed ruler with motorized single-axis-adjustment Top pressure beam with motorized height adjustment Edge magazine single Jointing cutter unit Cross-cut saw unit 2-motor Profile cutter unit top/bottom with multiple roller scanning Form cutter unit 1-motor Profile and flat scraper unit Buffing unit Edge thickness 0.4 - 8 mm Workpiece thickness 8 - 60 mm Feed 8 - 14 m/min joint trimming unit 2 x 2.2 KW snipping unit 2 x 0.18 KW rough trimming unit 2 x 0.55 KW

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units; suitable for small to medium production e ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 mm ATTENTION Available for coll ...

: 0,4 - 5 mmWorkingpiece thickness from to: 10 - 45 mmTotal length: mmFeed speed: 8 m/min.total power requirement: kwWeight: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excellent condition - Fully operational - Loading / Transport possible! Feed rate: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm With CE certificate

Excellent condition - Fully operational - Loading / Transport possible! BRANDT KDF 220 HIGHFLEX Edge Banding Machine with Joint Trimming Unit - Jointing cutter unit - Edge Magazine Single - pressure rollers 3 pieces with pneumatic 2-point adjustment - cross-cut saw unit with pneumatic adjustment CHAMFER/STRAIGHT - profile cutter unit pneumatic CHAMFER / RADIUS / STRAIGHT - Form Cutter Unit One motor - profile scraper with quick-change heads - flat scraper edge magazine with 1 -fold roller edge thickness 0.4 - 6 mm Workpiece Thickness 8 - 60 mm Feed 11 m/min Joint Trimming Unit 2x 2.2 KW Gluing Unit A6 Snipping Unit 2x 0.18 KW fine trimming unit 2x 0.27 KW Profile Trimming Unit 1x 0.35 KW / WD 40 flat scraping unit yes profile scraping unit yes control EASY CONTROL EC 10+

Excellent condition - Fully operational - Loading / Transport possible! total length: 5250 mm Jointing cutter: 2 pcs. DIA Single Edge Feed: Available suction diameter: 80 mm Chip Collection Box (Crosscut Saw) extension arm (extendable to the front) quick heating adhesive container 50 Hz 35.7 A Adhesive application rapid heating tank heating power 3.2 kW application roller motor power 0.18 kW Cross-Cut Saw Unit motor power 1 x 0.37 kW speed approx. 15000 rpm Corner trimming cutter motor power 1 x 0.37 kW speed approx. 12000 min -1 Accessories with roller conveyor including work cabinet, with edges, 6 drawers DIA jointing cutter 100 x 45.5 x 30 x Z2 DIA jointing cutter 3 pcs. new 100 x 45,5 x 30 x Z2 Leitz reversible knife 12 x 12 x 1.5 circular saw blades Leuco 110 x 3.6 x 22 T = 20

Excellent condition - Fully operational - Loading / Transport possible! Feed 10 m/min joint trimming unit Yes snipping unit Ja/Yes profile trimming unit Yes flat scraping unit Yes profile scraping unit Yes