33 KUPER used machine for sale

Guillotine for slitting veneer Kuper ZV800E Cutting width: 800 mm Cutting Height: 55mm Supply voltage: 380 V, three phase, 50 Hz Knife actuation: two-handed control for safety Brake motor power: 2.5KW Year of manufacture 1998 CE mark

Guillotine for slitting veneer Kuper ZV800E Cutting width: 800 mm Cutting Height: 55mm Supply voltage: 380 V, three phase, 50 Hz Knife actuation: two-handed control for safety Brake motor power: 2.5KW Year of manufacture 1998 CE mark

Veneer gluing machine Kuper Zig Zag Veneer Sewing Machine Type: FW 1150 Machine No. 4371 Longitudinal Assembling Machine Projection 1150 mm Feed 4 speeds Veneer thicknesses approx. 0.4 – 3.0 mm Total connected load 1.5 kW Operating voltage 480 V / 50 Hz Instruction manual available Dimensions 2100 mm x 800 mm x H 1800 mm Weight 520 kg

Veneer Soldering Machine Kuper FW/J 920 Thread splicer with glue Working width 920mm Working height 0.4-2mm Feed speed 15m/min Air Blow Heater Zigzag stitching Motor power 0.18kw Year of manufacture 2002 Air Demand 10l/min Dimensions 1280x560x1470mmH Weight 166kg

Shrinking equipment Shrink tunnel KUPER ST/I-1400 1350x650mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

KUPER FW-920 Zig-Zag Veneer Gluer Passage width max. approx. 920 mm, veneer thickness approx. 0.4 - 2 mm, feed speed approx. 15 m/min

Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V

thread splicer machine for veneer model KUPER FW 1150 second hand machine volt. 380/50

I sell the veneer assembly machine KUPER FLI. Built in 2007. Very good condition. Available the same.

On request

Kuper FWM 630 ST Veneer gluing machine Column projection 630 mm Driving equipment Feed rate approx. 7 m/min Drive electric motor 25 watts / 230 V Heating head approx. 75 watts G&-5106-O0691

Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left -------------- ...

Number of spindles: 5 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ------------------------------- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm Th ...

Number of spindles: 5 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ------------------------------- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter  ...

Number of spindles: 6 St. Working width: 15 - 250 mm Working height: 10-200 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ------------------------------------ - Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9 Touchscreen Manufacturers Description (Summary): ------------------------------------ 1st Spindle: HORIZONTAL BOTTOM ------------------------------------ Siemens IE3 motor with inverter brake: 7.5 kW D ...

working width: 630mm; feed: 7m/min;

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990