other machines for plastic used for sale (422)

Maximum temperature: 150° C; heating power: 9 Kw; pump power: 1.1 Kw; pump flow rate: 0 - 60 Lt/min; Tank capacity: 19 LtEstimated weight: 72 kg Approximate dimensions: 800x600xh600 mm Auction-ID: A7-46655-41

Management of nr. 2 zones; microcontroller: 1500W Incatronic AL 1; output voltage: 230 V; Temperature range: 0°-400° C.Estimated weight: 7 kg Approximate dimensions: 300x200xh200 mm Auction-ID: A7-46655-36

Maximum temperature: 95° C; heating power: 12 Kw; pump power: 0.75 Kw; Pump flow rate: 15 - 45 L/min. Serial: 05-06636Estimated weight: 50 kg Approximate dimensions: 800x600xh500 mm Auction-ID: A7-46655-42

Feed port: 210 x 135mm; granulation chamber: 150 x 90mm; rotating blades: 2; grid holes: 5.5mm. Serial: 2539Estimated weight: 200 kg Approximate dimensions: 1200x800xh1200 mm Auction-ID: A7-46655-33

Tank with electric pump and bufferEstimated weight: 100 kg Approximate dimensions: 1000X800X1900 mm Auction-ID: A7-46655-24

Max. temperature: 250° C; heating power: 8 Kw; pump power: 1.1 Kw; pump flow rate: 32 lt/min; Tank capacity: 9 lt. Serial: 461703Estimated weight: 70 kg Approximate dimensions: 800x600xh600 mm Auction-ID: A7-46655-38

used screening machine, function-tested, immediately available

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW

This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.

Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details.

air pressure:8 bar Air consumption:NI 18 l/min.weight:110 kgdimensions of the machine ca.:700 x 300 x 1000 mm

PLASTIC ELECTROPLATING PLANT ENTHONE GMBH, BJ. 2012: Automated system / area of application: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Goods window per product carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per product carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / output: 20 pcs. merchandise carriers per hour, clearance anode/anode chrome 700 mm, Copper 700 mm, nickel 700 mm, clear retraction dimension 550 mm in the direction of travel, 3100 mm in width, bath dimensions (rinsing) 3100 mm x 700 mm, / power consumption: drives: transport system 133 KW, filter 194 KW, exhaust air 229 KW, sewage system 150 KW, switchgear 704 KW, rectifier approx. 3190 KW, heating energy approx. 1410 KW / consisting of: automa ...

New, 250 hours of use • Feeds ground material from 6 to 10 mm and micronizes it to 500-600 μm; • Suitable for micronizing PP, PE, PS, ABS, PA, APET, and PMMA; • The material is fed into the center of a set of fixed discs and a set of rotating discs at high speed, with centrifugal force bringing the micronized material to the conveyor line; • Feeds through a stainless steel hopper with a vibrating feeder; Model Disc Diameter Motor Power Fan Flow Rate MP500 500mm 55 kW 7.5 kW 300 - 400 kg/h

CRUSHER ADLER 22 KW ADLER 22 KW Shredder This shredder is equipped with a reel winder for automatic material feeding. Winding pressure management. 1500 mm cutting chamber. Equipped with two turbines for big bag installation. Ideal for film. Reconditioned equipment. Shredder weight: 2350 kg Motor power: 22 KW Chute dimensions: 1500 x 180 mm Rotor type: hollow Rotor diameter: 250 mm Rotating blades: 3 x 5 Fixed blades: 2 x 5 Hourly production capacity: 300 to 500 kg/h Built-in cyclone

THIMON Shrink Wrapping Machine Brand: THIMON Model: HOTPAL 2000 Year of commissioning: 2011 Cycle counter: 114,250 Gas type: Propane Heating power: 370 kW Installed power: 13 kVA Voltage: 400V TNS Frame dimensions: 1450 x 1650 mm Maximum pallet dimensions: 1000 x 1200 x 2650 mm Maximum gross pallet weight: 1500 kg Machine weight: 2200 kg Comment: Equipment supplied includes shrink frame, lifting table, and safety enclosure with light curtains. Very good condition. Maintained by the manufacturer.

Make: Wittmann Type: Material Dryer / Hopper Loader System Model: Drymax C30-100-PDC Year: 2005 Serial number:KX00000149 Technical data: - Voltage: 3 x 400 V / 50 Hz - Power: 10.2 kVA - Current: 14.7 A - Hopper capacity: max. 80 kg (marked) Equipment: - Stainless steel drying hopper - Wittmann Drymax drying unit - Feedmax vacuum loader - Integrated temperature control display - Vacuum conveying hoses - Mobile frame with castors Condition: Used Auction-ID: A7-45993-57

Make: Wittmann Type: Material Dryer / Hopper Loader System Model: Drymax C30-100-PDC Year: 2005 Serial number: n/a Technical data: - Voltage: 3 x 400 V / 50 Hz - Power: 10.2 kVA - Current: 14.7 A - Hopper capacity: approx. 40 kg (marked M40) Equipment: - Stainless steel drying hopper - Wittmann Drymax drying unit - Feedmax material loader (vacuum loader) - Integrated control panel with temperature display - Vacuum conveying hoses - Mobile frame with wheels Condition: Used Auction-ID: A7-45993-56

Make: Digicolor Type: Dry Air Hopper Dryer Model: DWE 50/100T Year: 2017 Manufacturer: Digicolor, Herford Germany Technical data: - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 5.5 kW - Current: 16 A - Hopper capacity: approx. 100 liters Equipment: - Stainless steel drying hopper with inspection window - Integrated dry air system (drywell) - Digital control panel with temperature display - Material conveying hoses - Mobile base frame with castors - Main switch and signal light Application: - Drying of plastic granulates in injection moulding processes - Suitable for continuous material conditioning Condition: Used Auction-ID: A7-45993-45

Make: PIOVAN Type: Industrial Temperature Control Unit (Chiller / Thermoregulator) Model: THN120 Specifications: ECNK Year: 2003 Voltage: 400 V Frequency: 50 Hz Power: 12 kW Machine type: - Industrial water temperature controller / chiller - Used in plastic processing (injection moulding, extrusion, etc.) Control: - Digital control panel with display - Temperature setting and monitoring - Status indicators: Run, Alarm, Heating, Cooling Connections: - Water inlet/outlet connections - Industrial hose fittings installed Features: - Integrated cooling and heating system - Compact standalone unit - Main power isolator switch Application: - Temperature regulation of moulds and industrial processes - Cooling/heating circuits in plastic processing lines Condition: Used Auction-ID: A7-45993-31

Make: Digicolor Type: Dry Air Dryer / Hopper Dryer Model: DWE 50/100T Year: 2017 Manufacturer: Digicolor, Herford Germany Technical data: - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 5,500 W - Current: 16 A Equipment: - Stainless steel drying hopper - Integrated dry air system (drywell) - Digital temperature control display - Material suction / conveying hoses - Inspection window - Mobile frame with castors Application: - Drying of plastic granulates prior to processing - Injection moulding / extrusion support equipment Condition: Used Auction-ID: A7-45993-44

Type: Vertical band sawElectrical supply: 380V 3F 50 Hz Auction-ID: A7-46477-7

A compact Getecha edge trim granulator is available. Inlet opening X/Y: 254mm/305mm, drive power: 3.7kW. An on-site inspection is possible.

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-51

Rust on the right door Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-48

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-50

According to photos, weight estimated Auction-ID: A1-45666-13

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-45